skip to main content

Thermal Behavior and Hydrogen Production of Methanol Autothermal Reforming Performed Using Oxygen Enrichment and Cu/ZnO/Al2O3/Cr2O3/CeO2 Catalyst

Donny Lesmana  -  Department of Chemical Engineering, Faculty of Engineering, Universitas Lampung, 1 Soemantri Brojonegoro, Rajabasa, Bandar Lampung, 35145, Indonesia
*Ho-Shing Wu  -  Department of Chemical Engineering and Material Science, Yuan-Ze University, 135 Yuan Tung Road, Chung Li, Taoyuan, 32003,, Taiwan

Citation Format:
Cover Image
Abstract

A fixed-bed reactor designed for the autothermal reforming (ATR) of methanol under adiabatic conditions was constructed to experimentally determine the profile of temperature and catalyst activity generated using the Cu/ZnO/Al2O3/Cr2O3/CeO2 catalyst. The effect of oxygen enrichment in this experiment was investigated, and the experimental results showed that an increase in oxygen concentration correlated with an increase in the temperature of the catalytic bed; by contrast, this increase in oxygen concentration resulted in a reduction of the startup time of the catalyst. Moreover, the reaction temperature was determined to vary with the position within the catalytic fixed bed. © 2015 BCREC UNDIP. All rights reserved

Received: 29th August 2014; Revised: 19th March 2015; Accepted: 19th March 2015


Fulltext View|Download
Keywords: Autothermal Reforming; Methanol; Fixed Bed; Oxygen Enrichment; Hydrogen
Funding: Chi-Yuan Lee, Chia-Chieh Shen, Kuen-Song Lin, Yu-Chuan Lin, National Science Council of Taiwan

Article Metrics:

  1. Lesmana, D., Wu, H.S. (2012). Short Review: Cu Catalyst for Autothermal Reforming Methanol for Hydrogen Production. Bulletin Chemical Reaction Engineering & Catalysis. 7: 27-42. (DOI: 10.9767/bcrec.7.1.1284.27-42)
  2. Lin, K.S., Pan, C.Y., Chowdhury, S., Tu, M.T., Hong, W.T., Yeh, C.T. (2011). Hydrogen Generation Using a CuO/ZnO-ZrO2 Nanocatalyst for Autothermal Reforming of Methanol in a Microchannel Reactor. Molecules. 16: 348-366
  3. Chin, Y.H., Dagle, R., Hu, J., Dohnalkova, A.C., Wang, Y. (2002) Steam Reforming of Methanol over Highly Active Pd/ZnO Catalyst. Catalysis Today. 77: 79-88
  4. Agrell, J., Birgersson, H., Boutonnet, M., Cabrera, I.M., Navaro, R.M., Fierro, J.L.G. (2003). Production of Hydrogen from Methanol over Cu/ZnO Catalyst Promoted by ZrO2 and Al2O3. Journal of Catalysis. 219: 389-403
  5. Prins, M.J., Ptasinski, K.J., Janssen, J.J.G. (2007). From Coal to Biomass Gasification: Comparison of Thermodynamic Efficiency. Energy. 32: 1248-1259
  6. Turco, M., Bagnasco, G., Cammarano, C., Senese, P., Costantino, U., Sisani, M. (2007). Cu/ZnO/Al2O3 Catalysts for Oxidative Steam Reforming of Methanol: The Role of Cu and The Dispersing Oxide Matrix. Applied Catalysis B: Environmental. 77: 46-57
  7. Kuo, C.H., Lesmana, D., Wu, H.S. (2013) Hydrogen Production of Methanol Reformation Using Cu/ZnO/Al2O3 Catalyst at Low Temperature. Bulletin Chemical Reaction Engineering & Catalysis. 82: 110-124. (DOI: 10.9767/bcrec.8.2.4844.110-124)
  8. Chang, C.C., Chang, C.T., Chiang, S.J., Liaw, B.J., Chen, Y.Z. (2010). Oxidative Steam Reforming of Methanol Over CuO/ZnO/CeO2/ ZrO2/Al2O3 Catalysts. International Journal of Hydrogen Energy. 35: 7675-7683
  9. Patel, S., Pant, K.K. (2007). Hydrogen Production by Oxidative Steam Reforming of Methanol Using Ceria Promoted Copper-alumina Catalysts. Fuel Processing Technology. 88: 825-832
  10. Nahar, G., Dupont, V. (2013). Recent Advances in Hydrogen Production via Autothermal Reforming Process (ATR): A Review of Patents and Research. Recent Patents on Chemical Engineering. 6: 8-42
  11. Hernandez, R.P., Martinez, A.G., Wing, C.E.G. (2007). Effect of Cu Loading on CeO2 for Hydrogen Production by Oxidative Steam Reforming of Methanol. International Journal of Hydrogen Energy. 32: 2888-2894
  12. Ahmed, S., Ahluwalia, R., Lee, S.H.D. (2003). Experimental Study to Determine Fast-start Capability of On-board Fuel Processors. Fuel Cell Seminar Abstracts. Miami Beach, FL, 2003
  13. Springmann, S., Bohner, M., Sommer, M., Himmen, M., Eigenberger, G. (2003). Steady State and Dynamic Simulation of an Autothermal Gasoline Reformer. Chemical Engineering Technology. 26: 790-796
  14. Coombe, H.S., Nieh, S. (2007). Polymer Membrane Air Separation Performance for Portable Oxygen-enriched Combustion Application. Energy Conversion and Management. 48: 1499-1505
  15. Baker, R.W. (2002). Future Directions of Membrane Gas Separation Technology. Industrial Engineering Chemical Research. 4: 1393-1411
  16. Bingue, J.P., Saveliev, A.V., Kennedy, L.A. (2004). Optimization of Hydrogen Production by Filtration Combustion of Methane by Oxygen Enrichment and Depletion. International Journal of Hydrogen Energy. 29: 1365-1370
  17. Newson, E., Truong, T.B. (2003). Low-temperature Catalytic Partial Oxidation of Hydrocarbons (C1-C10) for Hydrogen Production. International Journal of Hydrogen Energy. 28: 1379-1386
  18. Lesmana, D., Wu, H.S. (2014). Modified Oxalic Acid Co-precipitation Method for Preparing Cu/ZnO/Al2O3/Cr2O3/CeO2 Catalysts for the OR (oxidative reforming) of M (methanol) to Produce H2 (Hydrogen) Gas. Energy. 69: 769-777
  19. Wu, H.S., Chung, S.C. (2007). Kinetics of Hydrogen Production of Methanol Reformation Using Cu/ZnO/Al2O3 Catalyst. Journal of Combinatorial Chemistry. 9: 990-997
  20. Lattner, J.R., Harold, M.P. (2007) Autothermal Reforming of Methanol: Experiments and Modeling. Catalysis Today. 120:78-89
  21. Chandan, A., Hattenberger, M., El-kharouf, A., Du, S., Dhir, A., Self, V., Pollet, B. G., Ingram, A., Bujalski, W. (2013). High Temperature (HT) Polymer Electrolyte Membrane Fuel Cells (PEMFC) - A Review. Journal of Power Sources. 231: 264-278

Last update: 2021-06-18 08:41:02

No citation recorded.

Last update: 2021-06-18 08:41:02

No citation recorded.