BibTex Citation Data :
@article{GT21958, author = {Adella Septiana and Iman Setiono}, title = {PENGATURAN PERGESERAN SUDUT FASA 120º SEBAGAI PEMBANGKIT GELOMBANG KOTAK PADA INVERTER TIGA FASA}, journal = {Gema Teknologi}, volume = {19}, number = {1}, year = {2016}, keywords = {}, abstract = { Adella Wulan Septiana, Iman Setiono in this paper explain that Three phase electricity is widely used in large and home industries. However, not all industries or electricity users can enjoy three-phase resources because the installation is quite expensive. So that the use of a single phase to three phase electric converter is needed. One alternative that can be done is by making an inverter. The inverter is a hardware device that functions to convert direct current (DC) voltage into alternating current (AC) voltage. From the 220 VAC voltage enter the step up transformer then to the rectifier circuit so that the voltage generated is 380V. Then IC 555 is used as a box wave generator with a frequency output of 322.7 Hz. Then the output goes into the IC 74175 flip-flop circuit as a phase shift that produces three outputs, where each output has a high and low value with a frequency of 53.8 Hz. Output from rectifier and 74175 is used as input for IGBT drivers. Keywords: three phase electricity, shift register, flip-flop 74175, inverter. References Afrizal, Mokhamad Asrul & Ainur Rofiq. Perencanaan dan Pembuatan Modul Inverter 3 Phase sebagai Suplai Motor Induksi pada Penngembangan Modul Praktikum Pengemudi Listrik . Proyek Akhir D3 Teknik Elektro Industri. Surabaya: Politeknik Negeri Surabaya Institut Teknologi Sepuluh November. Agus Cahya & Dedid Cahya. Rancang Bangun Inverter 3 Fasa untuk Pengaturan Kecepatan Motor Induksi . Proyek Akhir Teknik Elektronika. Surabaya: Politeknik Negeri Surabaya Institut Teknologi Sepuluh November. Agus Rusdiyanto & Bambang Susanto. Perancangan Inverter Sinusoida 1 Fasa dengan Aplikasi Pemrograman Rumus Parabola dan Segitiga sebagai Pembangkit Pulsa PWM . http://www.telimek.lipi.go.id/xdata/docs/BS18.pdf. Erfan, JC. 2016. Inverter 3 Fasa 220 Volt dengan Output Sinusoidal Frekuensi 50 Hz menggunakan Arduino dengan Teknik Direct Synthesis . Tugas Akhir S1 Teknik Elektro. Surakarta: Universitas Muhammadiyah Surakarta. }, issn = {2656-582X}, pages = {18--21} doi = {10.14710/gt.v19i1.21958}, url = {https://ejournal.undip.ac.id/index.php/gema_teknologi/article/view/21958} }
Refworks Citation Data :
Adella Wulan Septiana, Iman Setiono in this paper explain that Three phase electricity is widely used in large and home industries. However, not all industries or electricity users can enjoy three-phase resources because the installation is quite expensive. So that the use of a single phase to three phase electric converter is needed. One alternative that can be done is by making an inverter. The inverter is a hardware device that functions to convert direct current (DC) voltage into alternating current (AC) voltage. From the 220 VAC voltage enter the step up transformer then to the rectifier circuit so that the voltage generated is 380V. Then IC 555 is used as a box wave generator with a frequency output of 322.7 Hz. Then the output goes into the IC 74175 flip-flop circuit as a phase shift that produces three outputs, where each output has a high and low value with a frequency of 53.8 Hz. Output from rectifier and 74175 is used as input for IGBT drivers.
Keywords: three phase electricity, shift register, flip-flop 74175, inverter.
References
Article Metrics:
Last update:
Last update: 2024-12-21 12:32:25
The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to Gema Teknologi Journal and Vocational School of Diponegoro University as the publisher of the journal. Copyright encompasses rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms, and any other similar reproductions, as well as translations.
Gema Teknologi Journal, Vocational School of Diponegoro University and the Editors make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in Gema Teknologi Journal are sole and responsibility of their respective authors and advertisers.
