BibTex Citation Data :
@article{GT90244, author = {Cheyla Lokahita Pujiono and Fakhruddin Mangkusasmito}, title = {Pengendali Suhu Pada Etalase Fried Chicken Menggunakan Sensor DHT22 Dengan Metode Kontrol PID Berbasis Arduino Uno}, journal = {Gema Teknologi}, volume = {22}, number = {2}, year = {2023}, keywords = {Temperature Controller, DHT22 Sensor, PID Control.}, abstract = { The temperature inside a fried chicken display case is an external factor that affects the quality of crispy fried chicken. A heating system is essential to ensure that the crispy fried chicken remains in a condition ready and suitable for consumption. This study implements an Arduino Uno-based temperature control system for a fried chicken display case using the PID (Proportional-Integral-Derivative) control method. The PID method was selected because it offers the desired response characteristics: a fast response with minimal error. An incandescent lamp serves as the actuator, while a DHT22 sensor functions as the feedback component. Testing of the PID parameters yielded values of Kp = 220, Ki = 200, and Kd = 60, with a setpoint of 50ºC. In tests conducted without external disturbances, the system achieved a settling time (ts) of 576 seconds (approximately 10 minutes). When tested in the presence of disturbances, the system demonstrated a steady-state response with a steady-state error of 0.01%, a steady-state duration of 3900 seconds (65 minutes), and a recovery time of 609 seconds (approximately 10 minutes). }, issn = {2656-582X}, pages = {44--51} doi = {10.14710/gt.v22i2.90244}, url = {https://ejournal.undip.ac.id/index.php/gema_teknologi/article/view/90244} }
Refworks Citation Data :
The temperature inside a fried chicken display case is an external factor that affects the quality of crispy fried chicken. A heating system is essential to ensure that the crispy fried chicken remains in a condition ready and suitable for consumption. This study implements an Arduino Uno-based temperature control system for a fried chicken display case using the PID (Proportional-Integral-Derivative) control method. The PID method was selected because it offers the desired response characteristics: a fast response with minimal error. An incandescent lamp serves as the actuator, while a DHT22 sensor functions as the feedback component. Testing of the PID parameters yielded values of Kp = 220, Ki = 200, and Kd = 60, with a setpoint of 50ºC. In tests conducted without external disturbances, the system achieved a settling time (ts) of 576 seconds (approximately 10 minutes). When tested in the presence of disturbances, the system demonstrated a steady-state response with a steady-state error of 0.01%, a steady-state duration of 3900 seconds (65 minutes), and a recovery time of 609 seconds (approximately 10 minutes).
Article Metrics:
Last update:
Last update: 2026-11-19 09:04:54
The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to Gema Teknologi Journal and Vocational School of Diponegoro University as the publisher of the journal. Copyright encompasses rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms, and any other similar reproductions, as well as translations.
Gema Teknologi Journal, Vocational School of Diponegoro University and the Editors make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in Gema Teknologi Journal are sole and responsibility of their respective authors and advertisers.