BibTex Citation Data :
@article{GT90307, author = {Firstyawan Esa Naufalabib and Dista Yoel Tadeus}, title = {Rancang Bangun Sistem Lampu UV Majemuk Dengan Metode Satu Tabung dan Sistem Pembersih Sleve Otomatis Pada Alat Sterilisasi Air}, journal = {Gema Teknologi}, volume = {22}, number = {4}, year = {2024}, keywords = {UV sterilization, multi-lamp UV system, automatic sleeve cleaner, ESP32, IoT, data logging, irradiance}, abstract = { Water sterilization using ultraviolet (UV) light is an effective method because it produces no chemical residues and involves a relatively simple process. However, the performance of UV systems can decline due to the buildup of contaminants on the surface of the lamp sleeves, while conventional systems generally lack both automatic cleaning mechanisms and integrated performance monitoring. This study aims to design and build a water sterilization device using multiple UV lamps in a single reactor tube equipped with an automatic sleeve cleaning system and IoT-based monitoring. The device was built using four 55W Germilite UV lamps arranged in a circular pattern inside a single acrylic reactor tube. The sleeve cleaning mechanism is driven by a NEMA17 stepper motor via a lead screw system, controlled by an ESP32 microcontroller with a user interface consisting of a 20x4 LCD, a rotary encoder, and a DS3231 RTC, as well as a data logging feature to Google Spreadsheet via Google Apps Script. Test results show that the quartz sleeve provides significantly better UV radiation transmission compared to the acrylic sleeve and approaches the conditions of a sleeve-less setup. The automatic cleaning system operated successfully for 38 cycles (±19 hours) before a mechanical failure occurred at the coupling connecting the stepper motor to the lead screw. The IoT monitoring system successfully transmitted all data without any packet loss, achieving a 100% success rate. Geometric analysis of the reactor using a line source model showed that the four-lamp configuration produced a total irradiance of 40.612 µW/cm² at the reactor’s center, four times higher than that of the single-lamp configuration. }, issn = {2656-582X}, pages = {190--194} doi = {10.14710/gt.v22i4.90307}, url = {https://ejournal.undip.ac.id/index.php/gema_teknologi/article/view/90307} }
Refworks Citation Data :
Water sterilization using ultraviolet (UV) light is an effective method because it produces no chemical residues and involves a relatively simple process. However, the performance of UV systems can decline due to the buildup of contaminants on the surface of the lamp sleeves, while conventional systems generally lack both automatic cleaning mechanisms and integrated performance monitoring. This study aims to design and build a water sterilization device using multiple UV lamps in a single reactor tube equipped with an automatic sleeve cleaning system and IoT-based monitoring. The device was built using four 55W Germilite UV lamps arranged in a circular pattern inside a single acrylic reactor tube. The sleeve cleaning mechanism is driven by a NEMA17 stepper motor via a lead screw system, controlled by an ESP32 microcontroller with a user interface consisting of a 20x4 LCD, a rotary encoder, and a DS3231 RTC, as well as a data logging feature to Google Spreadsheet via Google Apps Script. Test results show that the quartz sleeve provides significantly better UV radiation transmission compared to the acrylic sleeve and approaches the conditions of a sleeve-less setup. The automatic cleaning system operated successfully for 38 cycles (±19 hours) before a mechanical failure occurred at the coupling connecting the stepper motor to the lead screw. The IoT monitoring system successfully transmitted all data without any packet loss, achieving a 100% success rate. Geometric analysis of the reactor using a line source model showed that the four-lamp configuration produced a total irradiance of 40.612 µW/cm² at the reactor’s center, four times higher than that of the single-lamp configuration.
Article Metrics:
Last update:
Last update: 2026-11-18 14:21:24
The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to Gema Teknologi Journal and Vocational School of Diponegoro University as the publisher of the journal. Copyright encompasses rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms, and any other similar reproductions, as well as translations.
Gema Teknologi Journal, Vocational School of Diponegoro University and the Editors make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in Gema Teknologi Journal are sole and responsibility of their respective authors and advertisers.