skip to main content

Simulasi Sistem Monitoring Suhu Dan Tekanan Internal pada Transformator Daya Berbasis ESP32 Menggunakan Website

*Dinar Salsabiela  -  Universitas Diponegoro, Indonesia
Yuniarto Yuniarto  -  Universitas Diponegoro, Indonesia

Citation Format:
Abstract

Power transformers are prone to operational failures due to increases in internal temperature and pressure. Given that built-in mechanical protection systems operate only reactively, this study aims to design a real-time early-detection and tank-monitoring system based on the Internet of Things (IoT). This system was developed using an ESP32 microcontroller, a Type K thermocouple sensor, and a pressure sensor. The sensor readings are processed to control safety actuators (buzzer, heater relay, and solenoid valve) based on three threshold conditions: SAFE, WARNING, and DANGER. The system also visualizes monitoring data on a Node-RED website and automatically logs the history via Google Spreadsheet. Test results show that the simulated system successfully responds to changing conditions as designed. When the status is WARNING, the buzzer activates as an early warning. In the DANGER condition, the microcontroller automatically turns off the heater and opens the solenoid valve to reduce pressure. Validation tests recorded a very low average reading error percentage—0.36% for temperature and an average deviation of 1.47 psi for pressure—compared to the reference measuring instruments. Overall, this system simulation successfully performed remote monitoring and protection functions with a high level of accuracy.

Keywords: power transformer, ESP32, Type K thermocouple, Internet of Things, Node-RED, monitoring system.

Article Metrics:

  1. I. B. Iriyanto and B. B. Murti, “Analisis Kegagalan Isolasi Pada Rel Trafo Utama 150KV Di PT. Indonesia Power UPJP BALI Unit Pesanggaran,” 2020. [Online]. Available: http://etd.repository.ugm.ac.id/
  2. A. N. Adnanti, “Analisis Sistem Proteksi Relai Diferensial Pada Transformator Daya 60 MVA Di Gardu Induk Jajar Menggunakan Software ETAP,” 2022
  3. F. Ramadhan Pratama and W. Purnawan, “Perancangan Sistem Kendali Temperature Suhu dan Level Oil Pada Prototype Transformator Tenaga,” TELKA, vol. 6, no. 2, pp. 85–92, 2020
  4. Ramadhanil and S. Meliala, “Monitoring Suhu Overheat Pada Transformator 1 Fasa Berbasis Esp32 Menggunakan Google Spreadsheet,” 2025
  5. Desmira and Martias, “Optimisasi Pengukuran dan Pengendalian Suhu pada Furnace Industri Menggunakan Termokopel Tipe K dan Sistem PID,” 2024. [Online]. Available: http://jurnal.bsi.ac.id/index.php/insantek65
  6. E. Cahyono and F. Silaban, “Monitoring Realtime Suhu dan Tekanan Transformator Traksi dengan ESP32 dan Ubidots,” 2024
  7. ] J. Hericson Purba and M. S. Safriandi, “Analisis Nilai Tahanan Isolasi dan Tegangan Tembus pada Minyak Transformator 150 kV Sebelum dan Sesudah Purifikasi di PT Energi Listrik Batam,” 2024
  8. A. Siswanto, A. Rohman, S. Suprijadi, M. Baehaqi, and A. Arifudin, “Analisis Karakteristik Minyak Transformator Menggunakan Pengujian Dissolved Gas Analysis (Dga) Pada Ibt 1 Gardu Induk,” Foristek, vol. 12, no. 1, pp. 30–42, May 2022, doi: 10.54757/fs.v12i1.142
  9. A. Nurfaizi and I. Sulistiyowati, “Sistem Monitoring Instrumen Air Sistem Berbasis Internet of Things di PT.Parna Raya,” vol. 16, no. 2, 2022
  10. Jefrina Dian Stifvani, Yudi Kristyawan, and Edi Prihartono, “Sistem Kontrol Stop Kran Otomatis Berdasarkan Deteksi Kebocoran Pipa Air Rumah Tangga Berbasis Arduino,” Router : Jurnal Teknik Informatika dan Terapan, vol. 3, no. 2, pp. 149–161, Jun. 2025, doi: 10.62951/router.v3i2.5

Last update:

No citation recorded.

Last update: 2026-11-05 13:35:02

No citation recorded.