Sensorless Vector Control of AC Induction Motor Using Sliding-Mode Observer

Phuc Thinh Doan, Tan Tien Nguyen, Sang Kwun Jeong, Sea June Oh, Sang Bong Kim


DOI: https://doi.org/10.12777/ijse.4.2.39-43

Abstract


This paper develops a sensorless vector controlled method for AC induction motor using sliding-mode observer. For developing the control algorithm, modeling of AC induction motor is presented. After that, a sliding mode observer is proposed to estimate the motor speed, the rotor flux, the angular position of the rotor flux and the motor torque from monitored stator voltages and currents. The use of the nonlinear sliding mode observer provides very good performance for both low and high speed motor operation. Furthermore, the proposed system is robust in motor losses and load variations. The convergence of the proposed observer is obtained using the Lyapunov theory. Hardware and software for simulation and experiment of the AC induction motor drive are introduced. The hardware consists of a 1.5kw AC induction motor connected in series with a torque sensor and a powder brake. A controller is developed based on DSP TMS320F28355. The simulation and experimental results illustrate that fast torque and speed response with small torque ripples can be achieved. The proposed control scheme is suitable to the application fields that require high performance of torque response such as electric vehicles.

doi:http://dx.doi.org/10.12777/ijse.4.2.2013.39-43

[How to cite this article: Doan, P. T., Nguyen, T. T., Jeong, S. K., Oh, S. J., & Kim, S. B. (2013). Sensorless Vector Control of AC Induction Motor Using Sliding-Mode Observer. INTERNATIONAL JOURNAL OF SCIENCE AND ENGINEERING, 4(2), 39-43; doi: http://dx.doi.org/10.12777/ijse.4.2.2013.39-43]


Keywords


Sliding-Mode Observer; AC Induction Motor; Sensorless Vector Control

Full Text:

PDF

References


M. Schroedl, "Sensorless control of AC machines at low speed and standstill based on the INFORM method," Proc. IEEE-IAS Annual meeting (1996), pp. 270-277.

P.L. Jansen, R.D. Lorentz, "Transducer-less position and velocity estimation in induction and salient AC machines," IEEE Trans. Ind. Appl., vol. 31, pp 240-247, Mar. 1995. http://dx.doi.org/10.1109/28.370269 C. Schauder, "Adaptive Speed Identification for Vector Control without Rotational Transducers," IEEE Trans. Ind. Appl. Vol.28, pp.1054-1061, Sep. 1992. http://dx.doi.org/10.1109/28.158829

J. Maes, J.A. Melkebeek, "Speed Sensorless Direct Torque Control of Induction Motors Using an Adaptive Flux Observer," IEEE Trans. Ind. Appl. Vol. 38, pp. 778-785, May 2000.

http://dx.doi.org/10.1109/28.845053

R. Kim, S.K. Sul, M.H. Park, "Speed Sensorless Vector Control of Induction Motor using extended Kalman Filter," IEEE Trans. Ind. Appl. Vol. 30, pp. 1225-1233, Sep. 1994. http://dx.doi.org/10.1109/28.315233

K.D Hurst, T.G. Habetler, "Sensorless Speed Measurement Using Current Harmonic Spectral Estimation in Induction Machines Drives," IEEE Trans. Power Electronics, vol. 11, pp.66-73, Jan. 1996. http://dx.doi.org/10.1109/63.484418

P. Vas, Artificial-Intelligence-Based Electrical Machines and Drives Application of Fuzzy, Neural, Fuzzy-Neural and Genertic-Algorithm Based Techniques, Oxford Univ. Press, UK, 1999.

V. Utkin, J. Gulder and J. Shi, Sliding Mode Control in Electromechanical Systems, Taylor & Francis, 1999.


Refbacks

  • There are currently no refbacks.


Published by Department of Chemical Engineering University of Diponegoro Semarang
Google Scholar

IJSEĀ  by http://ejournal.undip.ac.id/index.php/ijse is licensed under Creative Commons Attribution 3.0 License.