Pitting Corrosion of Ni3(Si,Ti) Intermetallic Compound at Various Chloride Concentrations

Gadang Priyotomo


DOI: https://doi.org/10.12777/ijse.5.2.25-28

Abstract


The pitting corrosion of Ni3(Si,Ti) intermetallic compound was investigated as function of chloride concentration by using electrochemical method and scanning electron microscope in sodium chloride solutions at 293 K.  In addition, the pitting corrosion of type C276 alloy was also studied under the same experimental condition for comparison.  The pitting potential obtained for the intermetallic compound decreased with increasing chloride concentration.  The specific pitting potential and pitting potential of Ni3(Si,Ti) were lower than those of C276 alloy, which means that the pitting corrosion resistance of C276 alloy was higher than that of Ni3(Si,Ti).


Full Text:

FULL TEXT PDF

Refbacks

  • There are currently no refbacks.


Published by Department of Chemical Engineering University of Diponegoro Semarang
Google Scholar

IJSE  by http://ejournal.undip.ac.id/index.php/ijse is licensed under Creative Commons Attribution 3.0 License.