BibTex Citation Data :
@article{GT21862, author = {Pandu Wicaksana and Saiful Manan}, title = {PEMINDAHAN TAPING FASA UNTUK PENYEIMBANGAN BEBAN PADA JARINGAN 3 FASA DENGAN MENDETEKSI ARUS NETRAL BERBASIS ARDUINO MEGA 2560}, journal = {Gema Teknologi}, volume = {19}, number = {2}, year = {2017}, keywords = {Unbalanced Load; Neutral Flow; SCADA; load balancing;}, abstract = { Pandu Wicaksana, Saiful Manan , in this paper explain that the load balance on the 3 phase 4 wire distribution system is very important. Continuous load imbalances can cause a decrease in the reliability of the electric power system and the quality of electrical energy. One consequence of an unbalanced load is the presence of a current flowing in a neutral introduction. The purpose of this study is to find out and analyze the current in a neutral conductor when the load conditions are unbalanced and when balanced. Load balancing is done by manual-remote, which means that the transfer of taping at a load is done by pressing the button that has been integrated with the HMI display. This software is also responsible for displaying current output from the sensor. That way, it can be seen that the current value of the neutral conductor before and after load balancing is done. That the current value of the neutral conductor will be smaller when the load is balanced compared to when the load between phases is not balanced. }, issn = {2656-582X}, pages = {1--5} doi = {10.14710/gt.v19i2.21862}, url = {https://ejournal.undip.ac.id/index.php/gema_teknologi/article/view/21862} }
Refworks Citation Data :
Pandu Wicaksana, Saiful Manan, in this paper explain that the load balance on the 3 phase 4 wire distribution system is very important. Continuous load imbalances can cause a decrease in the reliability of the electric power system and the quality of electrical energy. One consequence of an unbalanced load is the presence of a current flowing in a neutral introduction. The purpose of this study is to find out and analyze the current in a neutral conductor when the load conditions are unbalanced and when balanced. Load balancing is done by manual-remote, which means that the transfer of taping at a load is done by pressing the button that has been integrated with the HMI display. This software is also responsible for displaying current output from the sensor. That way, it can be seen that the current value of the neutral conductor before and after load balancing is done. That the current value of the neutral conductor will be smaller when the load is balanced compared to when the load between phases is not balanced.
Article Metrics:
Last update:
Sistem Tapping Fasa Keseimbangan Beban Berbasis Internet of Things
Last update: 2024-12-26 17:46:06
The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to Gema Teknologi Journal and Vocational School of Diponegoro University as the publisher of the journal. Copyright encompasses rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms, and any other similar reproductions, as well as translations.
Gema Teknologi Journal, Vocational School of Diponegoro University and the Editors make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in Gema Teknologi Journal are sole and responsibility of their respective authors and advertisers.
