skip to main content

ANALISIS UJI TIDAK MERUSAK PADA SAMBUNGAN LAS LAMBUNG FRAME 103 BAGIAN KAMAR MESIN KAPAL PATROLI 73 DENGAN METODE RADIOGRAPHY TEST

*Sulaiman Sulaiman  -  Program Studi Diploma III Teknologi Perancangan dan Konstuksi Kapal, Departemen Teknologi Industri, Sekolah Vokasi, Universitas Diponegoro, Indonesia
Budi Utomo  -  Program Studi Diploma III Teknologi Perancangan dan Konstuksi Kapal, Departemen Teknologi Industri, Sekolah Vokasi, Universitas Diponegoro, Indonesia
I Putu Agung Ardi Wijana  -  Program Studi Diploma III Teknologi Perancangan dan Konstuksi Kapal, Departemen Teknologi Industri, Sekolah Vokasi, Universitas Diponegoro, Indonesia

Citation Format:
Abstract

Non-Destructive Test is a supporting tool that is highly relied upon by the activities of controlling and ensuring the quality of a welding. Radiography test is one of the non-destructive tests that uses gamma rays that can penetrate almost all metals so that it can be used to reveal defects or discrepancies behind metal walls or within the material itself. The purpose of this paper is to know, plan a non-destructive testing activity with radiography test which includes the understanding along with the equipment needed during the testing process, what devices contribute to the testing process, as well as knowing the advantages and disadvantages of the test radiography. The method used in This writing is by experiment with welding connection frame 103 Patrol Ship 73 engine rooms. Radiography Test results found no welding defects on the inside of the welding as deep as a plate thickness, so that otherwise passed the checking received by BKI. Good preparation and consideration are needed before conducting this test.

Fulltext View|Download
Keywords: NDT; radiography test; welding; patrol boat
Funding: Sekolah Vokasi Universitas Diponegoro

Article Metrics:

  1. M. I. Haith et al., 2017, Radiographic modelling for NDE of subsea pipelines, NDT E Int., vol. 86, pp. 113–122
  2. S. F. Khristyson, I. P. Mulyatno, and A. Trimulyono, 2014, Analisa Kekuatan Konstruksi Internal Ramp Sistem Steel Wire Rope Pada KM. Dharma Kencana VIII Dengan Metode Elemen Hingga, J. Tek. Perkapalan, vol. 2, no. 3
  3. F. M. Suyama, M. R. Delgado, R. Dutra da Silva, and T. M. Centeno, 2019, Deep neural networks based approach for welded joint detection of oil pipelines in radiographic images with Double Wall Double Image exposure, NDT E Int., vol. 105, pp. 46–55
  4. L. Yenumula et al.,2019, Radiographic evaluation of gas tungsten arc welded joints used in nuclear applications by X- and gamma-rays, NDT E Int., vol. 102, pp. 144–152
  5. S. Zheng, J. Vanderstelt, J. R. McDermid, and J. R. Kish, 2017,Non-destructive investigation of aluminum alloy hemmed joints using neutron radiography and X-ray computed tomography, NDT E Int., vol. 91, pp. 32–35
  6. F. Prade et al., 2017, Nondestructive characterization of fiber orientation in short fiber reinforced polymer composites with X-ray vector radiography, NDT E Int., vol. 86, pp. 65–72
  7. S. Gholizadeh, 2016, A review of non-destructive testing methods of composite materials, Procedia Struct. Integr., vol. 1, pp. 50–57
  8. I. Amenabar, A. Mendikute, A. López-Arraiza, M. Lizaranzu, and J. Aurrekoetxea, 2011, Comparison and analysis of non-destructive testing techniques suitable for delamination inspection in wind turbine blades, Compos. Part B Eng., vol. 42, no. 5, pp. 1298–1305
  9. A. Katunin, K. Dragan, and M. Dziendzikowski, 2015, Damage identification in aircraft composite structures: A case study using various non-destructive testing techniques, Compos. Struct., vol. 127, pp. 1–9
  10. O. Zahran, H. Kasban, M. El-Kordy, and F. E. A. El-Samie, 2013, Automatic weld defect identification from radiographic images, NDT E Int., vol. 57, pp. 26–35
  11. H. Kasban, O. Zahran, H. Arafa, M. El-Kordy, S. M. S. Elaraby, and F. E. Abd El-Samie, 2011, Welding defect detection from radiography images with a cepstral approach, NDT E Int., vol. 44, no. 2, pp. 226–231
  12. M. Thornton, L. Han, and M. Shergold, 2012, Progress in NDT of resistance spot welding of aluminium using ultrasonic C-scan, NDT E Int., vol. 48, pp. 30–38

Last update:

No citation recorded.

Last update: 2024-11-12 03:35:41

No citation recorded.