BibTex Citation Data :
@article{GT8926, author = {Arif Setiawan and Subali Subali}, title = {ACR (AUTOMATIC CONTROL ROBOT) BERBASIS ATMEGA 8535 SEBAGAI APLIKASI MODEL ROBOT MENGGUNAKAN REL}, journal = {Gema Teknologi}, volume = {17}, number = {3}, year = {2015}, keywords = {}, abstract = { Arif Setiawan, Subali , in this paper explain that a fixed rail track used as a railway line. Application of rail as a direct path not only to train. However, there are also robots that use rail movement path. Rail crossings are used as the robot is not made of steel, but a line. This robot uses a single rail line is black with a white stripe background of a width adapted to the sensor mounted on the robot. Photodiode sensor lines will be detected, and then transmitted to the microcontroller 8535 as the brain or the source of the instruction that has been programmed. 8535 will detect the sensor output and then process the data received to proceed to the Driver that is connected to the DC motor. The output of the microcontroller 8535 will also be displayed through the LCD as the display position of the sensor and input characters. As an added speed control robot 4x1 keypad which will give instruction in the form of characters into the Microcontroller. Keywords: Rail, Sensor Photodiode, Microcontroller 8535, DC Motor Driver, LCD, Keypad, DC Motor. }, issn = {2656-582X}, doi = {10.14710/gt.v17i3.8926}, url = {https://ejournal.undip.ac.id/index.php/gema_teknologi/article/view/8926} }
Refworks Citation Data :
Arif Setiawan, Subali, in this paper explain that a fixed rail track used as a railway line. Application of rail as a direct path not only to train. However, there are also robots that use rail movement path. Rail crossings are used as the robot is not made of steel, but a line. This robot uses a single rail line is black with a white stripe background of a width adapted to the sensor mounted on the robot. Photodiode sensor lines will be detected, and then transmitted to the microcontroller 8535 as the brain or the source of the instruction that has been programmed. 8535 will detect the sensor output and then process the data received to proceed to the Driver that is connected to the DC motor. The output of the microcontroller 8535 will also be displayed through the LCD as the display position of the sensor and input characters. As an added speed control robot 4x1 keypad which will give instruction in the form of characters into the Microcontroller.
Article Metrics:
Last update:
Last update: 2024-11-24 21:48:44
The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to Gema Teknologi Journal and Vocational School of Diponegoro University as the publisher of the journal. Copyright encompasses rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms, and any other similar reproductions, as well as translations.
Gema Teknologi Journal, Vocational School of Diponegoro University and the Editors make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in Gema Teknologi Journal are sole and responsibility of their respective authors and advertisers.
