skip to main content

Rancang Bangun Mesin CNC Router Untuk Pencetakan Jalur PCB Berbasis Arduino Uno

*Muhammad Iqbal Irsyad  -  Universitas Diponegoro, Indonesia
Yuniarto Yuniarto  -  Universitas Diponegoro, Indonesia

Citation Format:
Abstract

This study discusses the design and construction of a CNC router for PCB trace routing based on the Arduino UNO, using a NEMA 17 stepper motor and a 775 DC spindle. The machine was designed for a working area of 200 × 100 mm and tested on three types of PCB designs: PTH, SMD, and hybrid. Test results show the accuracy of axis movement after calibration, with average errors of 0.25% (X), -0.309% (Y), and 0.45% (Z). Testing of the PCB traces revealed that small traces (0.4–0.5 mm) exhibited significant deviations of up to 253%, while traces ≥1 mm in width were relatively accurate with errors <5%. The length and width dimensions of the PCB had very small errors (<0.6%), and all traces were successfully connected. Factors contributing to the deviations included the limitations of the timing belt-based mechanical system, the FlatCAM cutting parameters, and the machine’s body material. The results of this study indicate that an Arduino UNO-based CNC machine can be used for the production of simple PCBs with guaranteed connectivity, although improvements in accuracy are still needed for small-sized traces.

Keywords: CNC Router, Arduino UNO, PCB, Accuracy, FlatCAM.

Article Metrics:

  1. Camachem, "Frequently Asked Questions About Ferric Chloride," [Online]. Available: https://camachem.com/en/blog/post/frequently-asked-question-about-ferric-chloride.[Accessed: 04-Mar-2025]
  2. Mama's Choice, "Bahaya DEET pada Lotion Anti Nyamuk," [Online]. Available: https://mamaschoice.id/article/bahaya-deet/ [Accessed: 04-Mar-2025]
  3. S. Supriyati, T. Pramuji, I. Saputro, dan L. R. Hidayati, "Rancang Bangun CNC (Computer Numerical Control) untuk Pembuatan PCB Berbasis Arduino," Orbith, vol. 19, no. 2, pp. 114–120, Jul. 2023
  4. M. R. A. Hasibuan, M. Muhaimin, dan S. Hardi, "Rancang Bangun Mesin CNC Milling 3-Axis untuk Engrave PCB Berbasis Arduino Uno," Jurnal TEKTRO, vol. 3, no. 1, pp. 40–47, Mar. 2019
  5. I. Malik, S. Effendi, dan S. Witjahjo, "Rancang Bangun Mesin CNC Engraver Mini Sebagai Alat Bantu Pembelajaran," Jurnal Teknika, vol. 13, no. 01, pp. 69–74, Jun. 2019
  6. Gnea GRBL Developers, “grbl: An open source, embedded, high performance g-code parser and CNC milling controller,” GitHub Repository, 2016. [Online]. Available: https://github.com/gnea/grbl. [Accessed: 04-Mar-2025]
  7. Handson Technology, "775 Ball Bearing DC Motor: Data Specifications," [Online]. Available: https://handsontec.com/dataspecs/775-Motor.pdf. [Accessed: 14-Apr-2025]
  8. Rajguru Electronics, “CNC shield for A4988,” rajguruelectronics.com, [Online]. Available: https://rajguruelectronics.com. [Accessed: 14-Apr-2025]
  9. Trinamic Motion Control GmbH & Co. KG, TMC2209 Datasheet – SilentStepStick Series, Rev. 1.09, Hamburg, Germany, 2020
  10. NINGBO LEISON MOTOR CO., LIMITED, 17HS Hybrid Stepper Motor Datasheet, [Online]. Available: https://www.alldatasheet.com. [Accessed: 14-Apr-2025]
  11. D. Kharisma, “Cara Setting Vref TMC2209 Tanpa UART,” YouTube, Jul. 21, 2023. [Online]. Available: https://youtu.be/VcyGzXIZm58?si=Y5FS7uIOpocfYHy6. [Accessed: 02-May-2025]
  12. GRBL Developers, “grbl: An open source, embedded, high performance g-code-parser and CNC milling controller written in optimized C,” GitHub Repository. [Online]. Available: https://github.com/grbl/grbl. [Accessed: 07-May-2025]
  13. Arduino, “Arduino UNO R3,” Arduino Documentation, [Online]. Available: https://docs.arduino.cc/hardware/uno-rev3/. [Accessed: 07-May-2025]
  14. Arduino, “Arduino Nano,” Arduino Documentation, [Online]. Available: https://docs.arduino.cc/hardware/nano/. [Accessed: 07-May-2025]
  15. Components101, “5V Single Channel Relay Module – Pinout, Features, Applications & Working,” Components101.com. [Online]. Available: https://components101.com/switches/5v-single-channel-relay-module-pinout-features-applications-working-datasheet. [Accessed: 19-May-2025]
  16. DickyBMZ, “Design PCB Menggunakan Cadsoft Eagle,” dickybmz.com, Jun. 24, 2017. [Online]. Available: https://www.dickybmz.com/2017/06/design-pcb-menggunakan-cadsoft-eagle.html. [Accessed: 19-May-2025]
  17. Solo Abadi, “8 Macam Jenis Mesin CNC yang Perlu Kamu Tahu,” SoloAbadi.com. [Online]. Available: https://soloabadi.com/8-macam-jenis-mesin-cnc-yang-perlu-kamu-tahu/. [Accessed: 19-May-2025]
  18. TechTarget, “What is a printed circuit board (PCB)?,” TechTarget WhatIs. [Online]. Available: https://www.techtarget.com/whatis/definition/printed-circuit-board-PCB. [Accessed: 24-May-2025]
  19. Indotech Group, “Tabel G-Code pada Mesin CNC Milling,” Indotech Group. [Online]. Available: https://indotech-group.co.id/tabel-g-code-pada-mesin-cnc-milling/. [Accessed: 11-Jun-2025]
  20. Indotech Group, “Tabel M-Code pada Mesin CNC Milling,” Indotech Group. [Online]. Available: https://indotech-group.co.id/tabel-m-code-pada-mesin-cnc-milling/. [Accessed: 11-Jun-2025]
  21. GRBL Community, “GRBL Serial Buffer Issue #302,” GitHub Issues. [Online]. Available: https://github.com/gnea/grbl/issues/302. [Accessed: 04-Jul-2025]
  22. GRBL Contributors, “GRBL Interface Documentation,” GitHub Docs. [Online]. Available: https://github.com/gnea/grbl/blob/master/doc/markdown/interface.md. [Accessed: 04-Jul-2025]
  23. OpenBuilds Forum, “Ask GRBL CNC Questions Here – Page 35,” OpenBuilds Community Forum. [Online]. Available: https://builds.openbuilds.com/threads/ask-grbl-cnc-questions-here.3000/page-35. [Accessed: 04-Jul-2025]

Last update:

No citation recorded.

Last update: 2026-11-17 23:11:36

No citation recorded.