skip to main content

Rancang Bangun Mesin Coil Winding Otomatis Berbasis Mikrokontroler Arduino Nano dan Motor Stepper Nema17 Untuk Coil Skala Kecil

*Uwaeis Bima Pangestu  -  Universitas Diponegoro, Indonesia
Fakhruddin Mangkusasmito  -  Universitas Diponegoro, Indonesia

Citation Format:
Abstract
The coil-winding process is still largely performed manually, particularly in small-scale industries, assembly workshops, and educational laboratories, resulting in several drawbacks such as reliance on operator skill, relatively long production times, and inconsistent winding quality. This study aims to design and build an automatic coil-winding machine based on an Arduino Nano with a NEMA 17 stepper motor drive. The developed system uses two stepper motors—one to rotate the spool and the other to guide the wire—with the number of windings and wire diameter controlled via input buttons connected to an LCD as the user interface, as well as a limit switch to restrict the movement of the wire-guiding mechanism. Testing was conducted using 0.15 mm diameter enameled wire of Brand A, 0.15 mm of Brand B, and 0.30 mm wire. System performance was evaluated by measuring coil resistance, analyzing the winding distribution at four measurement points (P1, P2, P3, and P4), and performing statistical analysis using mean, standard deviation, and coefficient of variation. The test results showed that all measurement points had relatively small standard deviations, indicating that the resulting winding distribution was uniform, while the accuracy calculations showed values above 98% for all wire variations tested. Based on these results, the developed automatic coil winder is capable of performing the winding process automatically
Keywords: Arduino Nano, coil winder, NEMA 17 stepper motor, coil distribution, precision.

Article Metrics:

  1. S. Agmal, J. A. Prakosa and C. Astuti, "Measurement Uncertainty Analysis of the Embedded System of Microcontroler for An Accurate Timer/Stopwatch," 2021 7th International Conference on Electrical, Electronics and Information Engineering (ICEEIE), Malang, Indonesia, 2021, pp. 290-294, doi: 10.1109/ICEEIE52663.2021.9616813.keywords:{Embeddedsystems;Microcontrollers;Measurementuncertainty;Cesium;Timemeasurement;Delays;Calibration;microcontroller;embeddedsystem;timer;stopwatch;accuracy;measurementuncertainty},
  2. N. Kiktev, N. Chichikalo, H. Rozorinov and K. Larina, "Infocommunication System of Automated Control of Conveyor Lines," 2021 IEEE 8th International Conference on Problems of Infocommunications, Science and Technology (PIC S&T), Kharkiv, Ukraine, 2021, pp. 71-76, doi: 10.1109/PICST54195.2021.9772214.keywords:{Schedules;Databases;Decisionmaking;Loading;Pipelines;Controlsystems;Software;conveyorline;coal;optimization;method;database;informationsystem;decisionmaking},
  3. Audrey O'Shea, "Introduction to the Arduino Nano," in A Geek Girl's Guide to Electronics and the Internet of Things , Wiley, 2021, pp.53-81, doi: 10.1002/9781119683674.ch4.keywords:{Voltage;UniversalSerialBus;Microcontrollers;Transformers;Pins;Hardware;Fuses},
  4. A. Z. Putri, H. Susanti, M. H. Barri, A. I. Haq and F. F. Fillah, "Implementation of Nema-17 Stepper Motor and SG-90 Servo Motor as Mechanical Drivers on Spinal Needle Positioning Test Equipment," 2023 IEEE International Biomedical Instrumentation and Technology Conference (IBITeC), Yogyakarta, Indonesia, 2023, pp. 52-57, doi: 10.1109/IBITeC59006.2023.10390937
  5. J. Luo, P. Cao, B. Yu, M. Zhang and W. Xu, "The Coil Auto-lifting System of Intelligent Winding Machine," 2021 4th International Conference on Robotics, Control and Automation Engineering (RCAE), Wuhan, China, 2021, pp. 246-250, doi: 10.1109/RCAE53607.2021.9638781
  6. Van Tu Duong et al., "Active real-time tension control for Coil winding machine of BLDC motors," 2014 International Conference on Advances in Computing, Communications and Informatics (ICACCI), Delhi, India, 2014, pp. 765-770, doi: 10.1109/ICACCI.2014.6968514
  7. W. O. Lujan, "The role of test methods and specifications in Coil winding," Proceedings: Electrical Insulation Conference and Electrical Manufacturing and Coil Winding Conference, Rosemont, IL, USA, 1997, pp. 627-640, doi: 10.1109/EEIC.1997.651269
  8. Y. Cheng and Y. Shu, "A New Analytical Calculation of the Mutual Inductance of the Coaxial Spiral Rectangular Coils," in IEEE Transactions on Magnetics, vol. 50, no. 4, pp. 1-6, April 2014, Art no. 7026806, doi: 10.1109/TMAG.2013.2290972
  9. I. Galkin and O. Tetervenoks, "The study of microcontroller based embedded system for smart lighting applications," 2014 6th European Embedded Design in Education and Research Conference (EDERC), Milan, Italy, 2014, pp. 105-108, doi: 10.1109/EDERC.2014.6924368
  10. J. F. Patarroyo, G. Beauchamp and A. Santiago, "Design and implementation of a microcontroller based workstation with educational purposes for the control systems area," 2015 IEEE Frontiers in Education Conference (FIE), El Paso, TX, USA, 2015, pp. 1-8, doi: 10.1109/FIE.2015.7344260
  11. V. Vladinovskis, "Selection of microcontroller board and stepper motor driver for FDM 3D printing to reduce power consumption," 2023 IEEE 64th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON), Riga, Latvia, 2023, pp. 1-6, doi: 10.1109/RTUCON60080.2023.10413037
  12. N. P. Gireesh and Deepa, "Designing HMI using RX series RX63N microcontroller," 2017 2nd IEEE International Conference on Recent Trends in Electronics, Information & Communication Technology (RTEICT), Bangalore, India, 2017, pp. 1049-1053, doi: 10.1109/RTEICT.2017.8256759
  13. R. Kalpana, G. Bhuvaneswari, B. Singh and P. S. Prakash, "Design and implementation of high frequency isolated AC-DC converter for switched mode power supplies," 2014 Eighteenth National Power Systems Conference (NPSC), Guwahati, India, 2014, pp. 1-6, doi: 10.1109/NPSC.2014.7103804
  14. K. Milanov, D. Gospodinova and M. Mintchev, "Study of an AC/DC Convertor Powered by DC Voltage," 2022 14th Electrical Engineering Faculty Conference (BulEF), Varna, Bulgaria, 2022, pp. 1-4, doi: 10.1109/BulEF56479.2022.10020203
  15. R. Radzuan, M. A. A. Raop, M. K. M. Salleh, M. K. Hamzah and R. A. Zawawi, "The designs of low power AC-DC converter for power electronics system applications," 2012 International Symposium on Computer Applications and Industrial Electronics (ISCAIE), Kota Kinabalu, Malaysia, 2012, pp. 113-117, doi: 10.1109/ISCAIE.2012.6482080
  16. J. Qi, J. Du, S. M. Siniscalchi, X. Ma and C. -H. Lee, "On Mean Absolute Error for Deep Neural Network Based Vector-to-Vector Regression," in IEEE Signal Processing Letters, vol. 27, pp. 1485-1489, 2020, doi: 10.1109/LSP.2020.3016837
  17. A. S. Abdel-Khalik and S. Ahmed, "Performance Evaluation of a Five-Phase Modular Winding Induction Machine," in IEEE Transactions on Industrial Electronics, vol. 59, no. 6, pp. 2654-2669, June 2012, doi: 10.1109/TIE.2011.2163914
  18. A. Tekade, M. Andhare, M. Savalgi, V. Kumbhar, A. Borgave and S. Raut, "High Precision Stepper Motor and DC Motor Controller Implementation on FPGA," 2025 9th International Conference on Computing, Communication, Control and Automation (ICCCBEA), Pune, India, 2025, pp. 1-8, doi: 10.1109/ICCUBEA65967.2025.11284110.keywords:{Motordrives;Automation;VHDL;Velocitycontrol;Computerarchitecture;Parallelprocessing;DCmotors;Timefactors;Fieldprogrammablegatearrays;Robots;FPGA;steppermotorcontrol;DCmotorcontrol;highprecision;microstepping;pulse-widthmodulation(PWM);VHDL;Verilog;robotics;automation;parallelprocessing}

Last update:

No citation recorded.

Last update: 2026-11-19 22:42:41

No citation recorded.