skip to main content

Rancang Bangun Trainer Pengatur Kecepatan Motor Induksi 3 Fasa Berbasis PLC Schneider TM221 dan VSD Altivar ATV320

*Ismu Baikhaqi Murbiyanta  -  Universitas Diponegoro, Indonesia
Priyo Sasmoko  -  Universitas Diponegoro, Indonesia

Citation Format:
Abstract

The development of industrial automation systems requires electric motor control that is efficient, reliable, and easy to operate. One of the methods used to regulate the speed of an induction motor is by utilizing a Variable Speed Drive (VSD) controlled by a Programmable Logic Controller (PLC). This study aims to design and develop a three-phase induction motor speed control system based on a Schneider Modicon TM221CE16R PLC, Human-Machine Interface (HMI), and Schneider ATV320U15M3C VSD using a three-stage multi-step method. The system was designed with three operating frequency levels, namely 15 Hz, 35 Hz, and 50 Hz. Motor speed measurements were carried out using a tachometer as a reference for the RPM value. At frequencies of 15 Hz, 35 Hz, and 50 Hz, the motor speeds obtained were approximately 450 rpm, 1044 rpm, and 1490 rpm, respectively. These results indicate that the motor speed is directly proportional to the VSD output frequency and closely matches the theoretical values, with minor deviations caused by induction motor slip. Furthermore, the HMI successfully functioned as an effective operation and monitoring interface, demonstrated stable performance, satisfactory accuracy, and ease of operation, making it suitable for educational purposes and industrial automation control applications.

Keywords: The development of industrial automation systems requires electric motor control that is efficient, reliable, and easy to operate. One of the methods used to regulate the speed of an induction motor is by utilizing a Variable Speed Drive (VSD) controlled

Article Metrics:

  1. and B. R. Rusdi, Gilang Arrachman, “Evaluasi Pengendalian Kecepatan Putaran Motor Induksi Tiga Fasa Menggunakan Variable Speed Drive ATV61 Terhadap Penghematan Energi Pada PLTGU Tanjung Batu,” PoliGrid, vol. 4, no. 2, pp. 68–74, 2023, doi: 10.46964/poligrid.v4i2.31
  2. A. S. A. Aziz, A. Gulton, and G. Simamora, “Analisis pengaruh Kendali Kecepatan Motor Induksi 3 Fasa Untuk Mesin Cuci Milnor Extractor Menggunkan Variable Speed Drive Yaskawa Di Hotel Indonesia Kempinski Jakarta,” J. Cahaya Mandalika, vol. 4, no. 3, pp. 1934–1954, 2024, doi: https://doi.org/10.36312/jcm.v4i3.3313
  3. A. Nadel, S. and Wang, W. and Liu, P. and McKane, “The China Motor Systems Energy Conservation Program: A Major National Initiative to Reduce Motor System Energy Use in China,” China, 2001. [Online]. Available: http://industrial-energy.lbl.gov
  4. R. Saidura, S. Mekhilef, M. B. Alia, Safari, and H. A. Mohammedc, “Applications of variable speed drive (VSD) in electrical motors energy savings,” Renew. Sustain. Energy Rev., vol. 16, no. 1, pp. 543–550, 2012, doi: https://doi.org/10.1016/j.rser.2011.08.020
  5. I. Rifaldo and M. Yuhendri, “Sistem Monitoring Kecepatan Motor Induksi dengan HMI Berbasis PLC,” JTEIN J. Tek. Elektro Indones., vol. 3, no. 2, 2022, doi: 10.24036/jtein.v3i2.264
  6. N. Evalina and A. A. Zulfikar, “Pengaturan Kecepatan Putaran Motor Induksi 3 Fasa Menggunakan Programmable Logic Controller,” J. Electr. Technol., vol. 3, no. 2, pp. 73–80, 2018
  7. S. R. Venupriya, K. P. Thanusree, and P. Saranya, “A Novel Method of Induction Motor Speed Control Using PLC,” Int. J. Res. Appl. Sci. & Eng. Technol., vol. 3, no. 2, pp. 233–237, 2015
  8. Firman, W. Handajadi, and S. Maulana, “Sistem Pengendalian Motor Induksi 3 Fase Berbasis Programmable Logic Control dan Variable Speed Drive Berpenampil Human Machine Interface,” J. Elektr., vol. 8, no. 2, pp. 37–44, 2021
  9. D. H. Simanjuntak and Risfendra, “Sistem Monitoring pada Sorting Machine dengan HMI Berbasis PLC,” JTEIN J. Tek. Elektro Indones., vol. 2, no. 1, pp. 65–70, 2020
  10. A. Rizaldy, I. Nawawi, and H. T. Setiawan, “KENDALI KECEPATAN MOTOR INDUKSI MENGGUNAKAN VARIABLE SPEED DRIVE BERBASIS SOFT PLC.”
  11. R. A. Rangkuti, A. Atmam, and E. Zondra, “Studi Pengaturan Kecepatan Motor Induksi Tiga Phasa Menggunakan Variable Speed Drive (VSD) Berbasis Programmable Logic Controller (PLC),” J. Tek., vol. 14, no. 1, pp. 121–128, 2020, doi: 10.31849/teknik.v14i1.2295
  12. Y. Badruzzaman, “Sistem Monitoring Kendali Motor Induksi Tiga Fasa Dengan Variable Speed Drive Berbasis Plc Dan Scada,” Orbith, vol. 11, no. 2, pp. 147–152, 2015
  13. M. A. BURHANUDDIN, “SIMULASI PEMBUATAN MINIATUR LIFT 3 LANTAI DENGAN MENGGUNAKAN SENSOR LOAD CELL DAN INFRARED BERBASIS PROGRAMMABLE LOGIC CONTROLLER (PLC) SCHNEIDER TM221CE16R DAN HUMAN MACHINE INTERFACE (HMI),” UNDIP, 2018
  14. T. Putra and M. Yuhendri, “Implementasi Hysterisis Current Control Pulse Width Modulation (HCCPWM) untuk Inverter 3 Fasa,” JTEIN J. Tek. Elektro Indones., vol. 2, no. 1, pp. 91–97, 2021, doi: 10.24036/jtein.v2i1.127
  15. R. Santhosh, M. V Siddharthan, Sailakshmi, and S. Yadav, “Protection and Control of 3 Phase Induction Motors in Industrial Plants with Smart Remote Monitoring and Control on a Centralized System,” in 2022 6th International Conference on Trends in Electronics and Informatics (ICOEI), 2022, pp. 317–326
  16. D. N. HUDA, “PENGUJIAN UNJUK KERJA VARIABEL SPEED DRIVE VF-S9 DENGAN BEBAN MOTOR INDUKSI 3 FASA 1 HP,” Politeknik Negeri Bandung, 2021
  17. Z. Anthony, “Kajian Pengembangan Lilitan Motor Induksi 1-Fasa Dengan Bentuk Lilitan 4-Fasa (Studi Kasus: Daya Keluaran dan Faktor Daya),” J. Tek. Elektro ITP, vol. 7, no. 2, pp. 95–100, 2018, doi: 10.21063/jte.2018.3133713
  18. G. Johanssen, Human-Machine Interaction. United Kingdom: EOLSS Publishers, 2003
  19. Priswanto, T. Herdantyo, D. T. Nugroho, Y. Ramadhani, and A. Mubyarto, “DESAIN DAN SIMULASI SISTEM HMI (Human Machine Interface) BERBASIS CITECT SCADA PADA KONVEYOR PROSES DI INDUSTRI,” Semin. Nas. Edusainstek, pp. 253–262, 2018
  20. G. Johannsen, “Cooperative Human-Interfaces for Plant-wide Control Communication,” Annu. Rev. Control, vol. 21, no. 1, pp. 159–170, 1996
  21. G. D. Prenata and A. Prayoga, “Pengaturan Kecepatan Motor Induksi 3 Fasa Menggunakan Sistem Multispeed pada Konveyor Mesin Crusher,” J. Arus Elektro Indones., 2024, doi: 10.19184/jaei.v10i2.49848
  22. GeeksforGeeks Contributors, “Speed Control of Three Phase Induction Motor,” 2025

Last update:

No citation recorded.

Last update: 2026-11-19 22:42:39

No citation recorded.