skip to main content

Rancang Bangun Sistem Manajemen Air Berbasis IoT Dengan Kontrol Fuzzy Logic Pada Hidroponik

*Raihan Ananto Putra  -  Universitas Diponegoro, Indonesia
Dista Yoel Tadeus  -  Universitas Diponegoro, Indonesia

Citation Format:
Abstract
This study discusses the design and development of an Internet of Things (IoT)-based water management system using Fuzzy Logic Control for backyard hydroponics. The system is designed to monitor and regulate the main parameters, namely nutrient solution pH, water flow rate, and water temperature, in order to maintain optimal plant growth conditions. A pH sensor, a water flow sensor, and a DS18B20 water temperature sensor are used as system inputs, while the ESP32 acts as the main controller that processes sensor data and executes fuzzy logic rules to determine control actions for the actuators. Water temperature control is implemented using a Peltier module combined with a waterblock as the heat transfer medium, while the BTS7960 driver is used to reverse the current direction through the Peltier module. By reversing the current direction, the hot side and cold side of the Peltier module can be interchanged, allowing the system to operate as both a water cooler and a water heater according to the required conditions. Sensor readings are displayed on the LCD, transmitted to the Blynk platform for real-time remote monitoring, and recorded using Google Form as a data logger. The test results indicate that the system is capable of monitoring water parameters in an integrated manner and providing control responses to changes in water flow rate and temperature according to the defined setpoints. Therefore, this system is expected to serve as a practical, adaptive, and efficient solution for automated backyard hydroponic water management
Keywords: Fuzzy Logic, IoT, ESP32, Hydroponics, Water Temperature.

Article Metrics:

  1. I. Khairani and K. Prawiroredjo, “Rancang Bangun Sistem Hidroponik Otomatis Berbasis Internet of Things,” J. Nas. Tek. Elektro dan Teknol. Inf., vol. 14, pp. 1–8, 2025, doi: 10.22146/jnteti.v14i1.13032
  2. S. F. M. S. N. P. M. F. F. M. Kartika, “Design and Implementation of Nutrition Control System for Optimization of Hydroponic Plant Growth,” Int. Conf. Adv. Mechatronics, Intell. Manuf. Ind. Autom., pp. 52–57, 2022, doi: 10.1109/ICAMIMIA54022.2021.9807772
  3. O. Saputra et al., “Rancang Bangun Sistem Pendingin Air Nutrisi Berbasis Peltier untuk Optimasi Pertumbuhan Tanaman Hidroponik Design and Development of a Peltier-Based Nutrient Water Cooling System for Optimizing Hydroponic Plant Growth,” J. Sains Teknol. Lingkung., vol. 11, pp. 259–268, 2025, doi: https://doi.org/10.29303/jstl.v11i2.856
  4. A. T. Heru Kuswanto, “RANCANG BANGUN SISTEM THERMOELECTRIC COOLER MENJADI PENDINGIN RUANGAN DENGAN DAMPAK TERHADAP PENGGUNAAN ENERGI,” JITET (Jurnal Inform. dan Tek. Elektro Ter., vol. 12, no. 3, 2024, doi: 10.23960/jitet.v12i3.4686
  5. M. Abhiyaksa, A. Mulyadi, and W. W. Sakti, “Sistem Kontrol Suhu Pada Destilator Untuk Mengukur Kadar Air Limbah Pabrik Udang Berbasis Arduino,” J. Electr. F., vol. 2, no. 2, pp. 66–79, 2025, doi: 10.63440/jef.v2i2.119
  6. A. M. Ridwan, A. S. Milah, L. Kamelia, and M. R. Renaldi, “Sistem Kendali Fuzzy Logic untuk Kestabilan pH dan EC Nutrisi Pada Hidroponik,” J. Teknol. Elektro, vol. 15, no. 03, pp. 152–159, 2024, doi: 10.22441/jte.2024.v15i3.002
  7. S. B. B. FITRIA SURYATINI, SUHARYADI PANCONO and P. M. S. MULJONO, “Sistem Kendali Nutrisi Hidroponik berbasis Fuzzy Logic berdasarkan Objek Tanam,” ELKOMIKA J. Tek. Energi Elektr. Tek. Telekomun. Tek. Elektron., vol. 9, no. 2, pp. 263–278, 2021, doi: http://dx.doi.org/10.26760/elkomika.v9i2.263
  8. W. M. U. Muhammad Alimussadad, Dyah Lestari, “SMART HYDROPONIC NUTRIENT MONITORING AND CONTROL SYSTEM USING FUZZY LOGIC AND IOT,” J. ELTIKOM J. Tek. Elektro, Teknol. Inf. dan Komput., vol. 9, no. 2, pp. 115–129, 2025, doi: http://doi.org/10.31961/eltikom.v9i2.1494

Last update:

No citation recorded.

Last update: 2026-11-19 09:04:33

No citation recorded.