BibTex Citation Data :
@article{GT90306, author = {Sutriyani Lapian and Saiful Manan}, title = {Rancang Bangun Sistem Solar Tracker Dual Axis Dengan Mekanisme Pan-Tilt Untuk Meningkatkan Daya Keluaran Panel Surya}, journal = {Gema Teknologi}, volume = {22}, number = {4}, year = {2024}, keywords = {Dual-Axis Solar Tracker System, Solar Panels, Pan-Tilt, LDR Sensor, Servo Motor, Arduino UNO}, abstract = { This final project aims to design a two-axis solar tracking system with a pan-tilt mechanism. The system uses six light sensors (LDRs) and two servo motors to automatically adjust the position of the solar panel so that it remains perpendicular to the incoming sunlight. Four LDR sensors are used to move the servos horizontally, while the other two LDR sensors control vertical movement. To enhance directional sensitivity, each LDR sensor is enclosed in an 8-cm-long tube. The system uses an Arduino UNO microcontroller and is equipped with an RTC for time-stamping and an SD card module for data storage. System testing was conducted to evaluate sensor performance, servo motor movement, and solar panel power output. The test results showed that the system works well, with the LDR sensors and servo motors interacting effectively to track the sun’s movement, as demonstrated by the servo motors’ dynamic response to changes in light intensity. In terms of power, the system proved capable of optimizing energy absorption. Under sunny conditions, the maximum power generated reached 5.83 W. Although this did not reach the panel’s peak power specification (10 Wp), this difference was due to weather factors and less-than-ideal outdoor testing conditions. }, issn = {2656-582X}, pages = {187--189} doi = {10.14710/gt.v22i4.90306}, url = {https://ejournal.undip.ac.id/index.php/gema_teknologi/article/view/90306} }
Refworks Citation Data :
This final project aims to design a two-axis solar tracking system with a pan-tilt mechanism. The system uses six light sensors (LDRs) and two servo motors to automatically adjust the position of the solar panel so that it remains perpendicular to the incoming sunlight. Four LDR sensors are used to move the servos horizontally, while the other two LDR sensors control vertical movement. To enhance directional sensitivity, each LDR sensor is enclosed in an 8-cm-long tube. The system uses an Arduino UNO microcontroller and is equipped with an RTC for time-stamping and an SD card module for data storage. System testing was conducted to evaluate sensor performance, servo motor movement, and solar panel power output. The test results showed that the system works well, with the LDR sensors and servo motors interacting effectively to track the sun’s movement, as demonstrated by the servo motors’ dynamic response to changes in light intensity. In terms of power, the system proved capable of optimizing energy absorption. Under sunny conditions, the maximum power generated reached 5.83 W. Although this did not reach the panel’s peak power specification (10 Wp), this difference was due to weather factors and less-than-ideal outdoor testing conditions.
Article Metrics:
Last update:
Last update: 2026-11-19 21:19:17
The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to Gema Teknologi Journal and Vocational School of Diponegoro University as the publisher of the journal. Copyright encompasses rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms, and any other similar reproductions, as well as translations.
Gema Teknologi Journal, Vocational School of Diponegoro University and the Editors make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in Gema Teknologi Journal are sole and responsibility of their respective authors and advertisers.