BibTex Citation Data :
@article{GT90339, author = {Julio Abiyu Putra and Fakhruddin Mangkusasmito}, title = {Rancang Bangun Pembangkit Listrik Tenaga Bayu Menggunakan Turbin Tipe Savonius 6 Sudu Dengan Generator AC Berbasis Arduino MEGA 2560}, journal = {Gema Teknologi}, volume = {23}, number = {2}, year = {2025}, keywords = {Wind Power Plant, DC Generator, Archimedes Turbine}, abstract = { The design and construction of a prototype for a Wind Power Plant (PLTB) using a three-blade Archimedes wind turbine has been completed. This turbine utilizes a DC motor that has been converted into a DC generator, with overall dimensions of 120 x 80 x 80 cm, powered by wind energy. Testing was conducted to evaluate the efficiency of converting wind energy into electrical energy based on various wind speeds and types of loads, including resistors, DC motors, and LED lamps. Test results indicate that system efficiency varies depending on wind speed and load characteristics. The highest efficiency was achieved at an optimal wind speed, ranging from 60-80%, with a power coefficient between 0.1033 and 0.1699. For a 15-watt LED lamp load, the average voltage recorded was 7.404 V, whereas, for a 5-watt DC motor load, the average voltage reached 10.132 V. The testing also revealed that the highest power value for resistor loads was obtained with a 10.5 Ω resistor, delivering 2.22 W. This study highlights the importance of optimizing turbine and generator system design to enhance energy conversion efficiency under varying wind speed conditions. }, issn = {2656-582X}, pages = {41--48} doi = {10.14710/gt.v23i2.90339}, url = {https://ejournal.undip.ac.id/index.php/gema_teknologi/article/view/90339} }
Refworks Citation Data :
The design and construction of a prototype for a Wind Power Plant (PLTB) using a three-blade Archimedes wind turbine has been completed. This turbine utilizes a DC motor that has been converted into a DC generator, with overall dimensions of 120 x 80 x 80 cm, powered by wind energy. Testing was conducted to evaluate the efficiency of converting wind energy into electrical energy based on various wind speeds and types of loads, including resistors, DC motors, and LED lamps. Test results indicate that system efficiency varies depending on wind speed and load characteristics. The highest efficiency was achieved at an optimal wind speed, ranging from 60-80%, with a power coefficient between 0.1033 and 0.1699. For a 15-watt LED lamp load, the average voltage recorded was 7.404 V, whereas, for a 5-watt DC motor load, the average voltage reached 10.132 V. The testing also revealed that the highest power value for resistor loads was obtained with a 10.5 Ω resistor, delivering 2.22 W. This study highlights the importance of optimizing turbine and generator system design to enhance energy conversion efficiency under varying wind speed conditions.
Article Metrics:
Last update:
Last update: 2026-11-05 08:47:28
The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to Gema Teknologi Journal and Vocational School of Diponegoro University as the publisher of the journal. Copyright encompasses rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms, and any other similar reproductions, as well as translations.
Gema Teknologi Journal, Vocational School of Diponegoro University and the Editors make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in Gema Teknologi Journal are sole and responsibility of their respective authors and advertisers.
