PROCESSING OF WATERMELON RIND DEHYDRATED CANDY
DOI: https://doi.org/10.12777/ijse.8.1.6-9
Abstract
Watermelon rind (Citrullus lanatus) dehydrated candy was prepared by using osmotic dehydration process that involves slow impregnation of syrup before drying at 50°C for 8, 14 and 20 hours. From the study, it can be seen that drying time significantly affected the moisture content of the watermelon rind dehydrated candy. The moisture content was significantly decreased with drying time. For colour evaluation, the L* value of watermelon rind dehydrated candy was slightly decreased with drying time while the a* value was slightly increased. Watermelon rind dehydrated candy that dried for 14 hours was the most preferred sample by the panelists as it received the highest score for texture, taste and overall acceptability attributes. So, it can be concluded that 14 hours of drying time is the most appropriate time to dry the candied watermelon rind.
Keywords
Full Text:
FULL TEXT PDFReferences
AOAC. (2000). Official method of analysis of AOAC International. 17th Edition.
Gaithersburg, MD, USA: Association of Analytical Communities
Athmaselvi, K.A., Alagusundaram, K., Kavitha C.V. and Arumuganathan T. (2012). Impact
of pretreatment on colour and texture of watermelon rind. International Agrophysics, 26:
-242; doi: 10.2478/v10247-012-0035-5
Chen, A.O. (1989). Quality improvement of candied fruits. ACS Symp. Ser. – Am. Chem.
Soc. 405: 319–325
Diamante, L., Durand, M., Savage, G. and Vanhanen, L. (2010). Effect of temperature on the
drying characteristics, colour and ascorbic acid content of green and gold kiwifruits.
International Food Research Journal, 17: 441-451;
http://www.ifrj.upm.edu.my/17%20(02)%202010/IFRJ-2010-441-451_Lemuel_New_Zealand_France[1].pdf
Fellows, P. and Hampton, A. (1992). Small-scale food processing - A guide for appropriate
equipment. London: Intermediate Technology Publications
Gabriela, A., Pompeu, T., Paulo, C., Carneiro, F. and C. Hilary. (2004). Osmotic dehydration
of mango: effects of temperature and process time. International Sugar Journal, 12 (8): 70-71
Hasimah, H. A. (1988). Drying of fruits. Teknologi Makanan, 7: 49–53
Jangam, S.V., Joshi, V.S., Mujumdar, A.S. and Thorat, B.N. (2008). Studies on dehydration
of sapota (Achras zapota). Drying Technol. 26: 369 – 377; doi: 10.1080/07373930801898190
Koocheki, A., Razavi, S.M.A., Milani, E., Moghadam, T.M., Abedini, M., Alamatiyan, S. and
Izadkhah, S. (2007). Physical properties of watermelon seed as a function of moisture content
and variety. Int. Agrophysics, 21: 349-359;
http://www.old.international-agrophysics.org/artykuly/international_agrophysics/IntAgr_2007_21_4_349.pdf
Kresic, G., Lelas, V. and Simundic, B. (2004). Effects of processing on nutritional
composition and quality evaluation of candied celeriac. Sadhana, 29 455 (1): 1–12;
http://link.springer.com/article/10.1007%2FBF02706997
Kumar, P. (1985). Watermelon- utilization of peel waste for pickle processing. Indian Food Packer, 39 (4): 49-52
Leistner, L., Ro¨del, W. and Krispien, K. (1981). Microbiology of meat and meat products in
high and intermediate moisture ranges. In: Water Activity: Influences on food quality, p. 855.
New York: Academic Press
Lopez, A., Pique, M.T., Boatella, J., Romero, A. and Garcia, J. (1997). Influence of drying
conditions on the hazelnut quality: III. Browning. Drying Technology, 15: 989-1002;
doi: 10.1080/07373939708917273
Lyderson, A. L. (1983). Mass transfer in engineering practice. New York: John Wiley and
Sons
Madhuri, P. and Devi, K. (2003). Value addition to watermelon fruit waste. Journal of Food
Science and Technology, 40 (2): 222-224
Maskan, M. (2001). Kinetics of colour change of kiwifruits during hot air and microwave
drying. Journal of Food Engineerin,g 48: 169-175; DOI: 10.1016/S0260-8774(00)00154-0
McBean, D. McG., Joslyn, M. A. and Nury, F. S. (1971). Dehydrated fruit. In: The
biochemistry of fruit and their products (Hulme, A. C., ed.). Vol. 2, p. 623–652. London:
Academic Press
Meilgaard, M., Civille, G.V. and Carr, B.T. (1999).Sensory evaluation techniques. 3rd ed.
Boca Raton, Florida: CRC Press
Rahman, M. S. and Perera, C. (1996). Osmotic dehydration: a pretreatment for fruit and
vegetables to improve quality and process efficiency. The Food Technologyst, 25 (4): 144-147
Rastogi, N.K. and Raghavarao, K.S.M.S. (1997). Water and solute diffusion coefficients of
carrot as a function of temperature and concentration. Journal of Food Engineering, 34 (4):
–440; www.sciencedirect.com/science/article/pii/S0260877498800344
Ratti, C. (2001). Hot and freeze-drying of high-value foods: a review. Journal of Food
Engineering, 49: 311–319; www.sciencedirect.com/science/article/pii/S0260877400002284
Simonne, A., Carter, M., Fellers R., Weese J., Wei, C.I., Simonne E. and Miller M. (2002).
Chemical, physical, and sensory characterization of watermelon rind pickles. Journal of Food
Processing Preservation, 26: 415-31; doi: 10.1111/j.1745-4549.2003.tb00494.x
Stone, H. and Sidel, J.I. (1985). Sensory evaluation practices. Orlando: Adacemic Press
Vishal, K., Gunjan, K., and Sharma, P.D. (2012). Osmotic dehydration of litchi pulp as a
pretreatment for drying processes. Agric Eng Int: CIGR Journal, 14(3):146-151; www.cigrjournal.org/index.php/Ejounral/article/view/1896/1644
Zainun, C.A. (1995). Processing of dehydrated candied guava. Teknologi Makanan 4: 63–66
Zainun, C.A. (2007). Processing of Mango. Proc. of the National Horticulture Conference
p. 331-336. 13-15 March 2007. Johor Bahru, Johor