BibTex Citation Data :
@article{ROTASI26478, author = {Nicholas Kurniawan and Arka Soewono and Isdaryanto Iskandar}, title = {Analisis Pengaruh Perubahan Ukuran Cam Lobe Lift terhadap Performa pada Mesin Otto Empat Langkah}, journal = {ROTASI}, volume = {22}, number = {3}, year = {2020}, keywords = {Cam lobe, volumetric efficiency, performance, power, torque.}, abstract = { The modification of cam lobe lift value was studied to observe its effects on the volumetric efficiency and performance of a 4-stroke Otto engine with a displacement of 150 cc . The testing was done by comparing the standard cam lobe with 7,36 mm lift and two other cam lobes with a higher lift, which is 8,24 mm and 8,53 mm. ANSYS software was used as a method to acquires the volumetric efficiency value, while a dynamometer was used to measures the performance . From the calculation and testing that has been done, the usage of both modification cam lobes increase the volumetric efficiency and performance of the engine. Compared with the standard cam, the cam with 8,53 mm lift result in an increase of volumetric efficiency from 78,51% to 84,1% and performance from 15,36 WHP to 15,76 WHP at 9000 rpm . }, issn = {2406-9620}, pages = {143--148} doi = {10.14710/rotasi.22.3.143-148}, url = {https://ejournal.undip.ac.id/index.php/rotasi/article/view/26478} }
Refworks Citation Data :
The modification of cam lobe lift value was studied to observe its effects on the volumetric efficiency and performance of a 4-stroke Otto engine with a displacement of 150 cc. The testing was done by comparing the standard cam lobe with 7,36 mm lift and two other cam lobes with a higher lift, which is 8,24 mm and 8,53 mm. ANSYS software was used as a method to acquires the volumetric efficiency value, while a dynamometer was used to measures the performance. From the calculation and testing that has been done, the usage of both modification cam lobes increase the volumetric efficiency and performance of the engine. Compared with the standard cam, the cam with 8,53 mm lift result in an increase of volumetric efficiency from 78,51% to 84,1% and performance from 15,36 WHP to 15,76 WHP at 9000 rpm.
Note: This article has supplementary file(s).
Article Metrics:
Last update:
Last update: 2026-11-18 02:50:04
Hak Cipta: Penulis memegang hak cipta atas artikel mereka dan memberikan hak publikasi pertama kepada Jurnal Rotasi.
Lisensi Terbitan: Semua artikel disebarluaskan di bawah lisensi Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License (CC BY-NC-SA 4.0), yang mengizinkan pihak lain untuk menyalin, mendistribusikan, menampilkan, serta membuat karya turunan dari artikel ini dengan ketentuan:
Attribution (BY): Wajib memberikan pencantuman kredit/penghargaan yang sesuai kepada penulis asli dan Jurnal Rotasi sebagai penerbit pertama, menyertakan tautan lisensi, dan menunjukkan jika ada perubahan yang dilakukan.
NonCommercial (NC): Karya tidak boleh digunakan untuk tujuan komersial atau mencari keuntungan finansial tanpa izin tertulis dari pemegang hak cipta.
ShareAlike (SA): Jika Anda menggubah, mengubah, atau membuat karya turunan berdasarkan materi ini, Anda harus menyebarluaskan hasil karya tersebut di bawah lisensi yang sama (CC BY-NC-SA 4.0).
Arsip & Retensi: Penulis diizinkan untuk menyebarluaskan dan mengunggah karya mereka secara daring (misalnya di repositori institusi atau situs web pribadi) setelah publikasi, dengan tetap mencantumkan atribusi ke terbitan Jurnal Rotasi.
Penerbit: Departemen Teknik Mesin, Fakultas Teknik, Universitas Diponegoro
Alamat Redaksi: Gedung Administrasi Lantai II Departemen Teknik Mesin Fakultas Teknik Undip Telp.(024)7460059, Facsimile: (024)7460059 ext.102 Email: rotasi@live.undip.ac.id