DOI: https://doi.org/10.14710/rotasi.23.1.6-12

Pengaruh Diameter Katup Pengantar Dan Tinggi Angkat Terhadap Efisiensi Pompa Hidram 3 Inci

*Muhamad Jafri  -  Program Studi Teknik Mesin Universitas Nusa Cendana, Indonesia
Nurhayati Nurhayati  -  , Indonesia
Open Access Copyright (c) 2021 ROTASI

Citation Format:
Abstract
This study aims to analyze the effect of valve diameter and delivery head on hydram pump. The method used is experiment on specimens, and analysis using mathematical equations in hydram pump theory. The data measured are the flow of water in, discharge of waste water, and discharge of water out. The independent variables in this study were the diameter of the introductory valve, namely 2.0 inches, 2.25 inches, 2.50 inches, 2.75 inches, and delivery head, namely 3 m, 5 m, 7 m. Furthermore, analysis of the head loss and the efficiency of the D'Aubuisson hydram pump was carried out. The results showed that the diameter of the delivery valve and the delivery head had an effect on the effect of the hydram pump. The highest hydram pump occurs at a delivery valve diameter of 2.5 inches and a delivery head of 5 m at 55.21%. While the lowest occurred at a delivery head of 3 m and a diameter of 2.0 inch delivery valve at 13.75%.
Fulltext View|Download Email colleagues
Keywords: Hydram pump; delivery valve diameter;delivery head

Article Metrics:

Article Info
Section: Articles research
Language : ID
Most cited articles
ANALISIS EFISIENSI RAW GRIDING MILL PADA PROSES PEMBUATAN SEMEN PENERAPAN DAN PENGUJIAN MODEL TEKNOLOGI ANAEROB DIGESTER UNTUK PENGOLAHAN SAMPAH BUAH-BUAHAN DARI PASAR TRADISIONAL Pengukuran Distribusi Beban Telapak Kaki Manusia Saat Berdiri Tegak Menggunakan Sensor FSR 402 KAJI EKSPERIMENTAL PENGARUH TEMPERATUR BIODIESEL MINYAK SAWIT TERHADAP PERFORMANSI MESIN DIESEL DIRECT INJECTION PUTARAN KONSTAN MATCHING AND STITCHING FOR SURFACE IDENTIFICATION More cited articles

Last update:

No citation recorded.

Last update: 2026-10-21 12:04:41

No citation recorded.