BibTex Citation Data :
@article{ROTASI3577, author = {Athanasius Bayuseno and Susilo Widyanto and Juwantono Juwantono}, title = {SINTESIS SEMEN GEOPOLIMER BERBAHAN DASAR ABU VULKANIK DARI ERUPSI GUNUNG MERAPI}, journal = {ROTASI}, volume = {12}, number = {4}, year = {2012}, keywords = {Geopolymer, Volcanic ash, Compressive strength of mortar and Albite}, abstract = {Recently, it has been paid more attention to reduce the carbon dioxide emision from cement industry by introducing the new technology of producing green cement. In the same time, the Merapi eruption has produced the million ton of volcanic ash which is potentially attractive for used as raw material of geopolimer. In this research, geopolymer material was sinthesized from volcanic ash and then mixed by alkaline solution of sodium hydroxide and sodium silicate at variation of heating temperature, heating time, and hardening time. The objective of this research was to study about feasibility of volcanic ash as raw material for making geopolymer materials and to determine the optimum process for getting high compressive strength as well as to determine the composition of geopolymer precursor. In this research, chemical composition of the volcanic ash was previously determined by XRF, while the phase composition of the geopolymer obtained by XRD analysis. Results show that volcanic ash contains alumina and silica as dominant compounds, while the mineral phase is dominated by Albite. The highest compressive strength of mortar is obtained at16,81 MPa, produced from specimens which were heated for 12 hours and at temperature of 80 OC, and aged for 30 days}, issn = {2406-9620}, pages = {10--16} doi = {10.14710/rotasi.12.4.10-16}, url = {https://ejournal.undip.ac.id/index.php/rotasi/article/view/3577} }
Refworks Citation Data :
Article Metrics:
Last update:
Last update: 2026-11-16 23:40:50
Hak Cipta: Penulis memegang hak cipta atas artikel mereka dan memberikan hak publikasi pertama kepada Jurnal Rotasi.
Lisensi Terbitan: Semua artikel disebarluaskan di bawah lisensi Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License (CC BY-NC-SA 4.0), yang mengizinkan pihak lain untuk menyalin, mendistribusikan, menampilkan, serta membuat karya turunan dari artikel ini dengan ketentuan:
Attribution (BY): Wajib memberikan pencantuman kredit/penghargaan yang sesuai kepada penulis asli dan Jurnal Rotasi sebagai penerbit pertama, menyertakan tautan lisensi, dan menunjukkan jika ada perubahan yang dilakukan.
NonCommercial (NC): Karya tidak boleh digunakan untuk tujuan komersial atau mencari keuntungan finansial tanpa izin tertulis dari pemegang hak cipta.
ShareAlike (SA): Jika Anda menggubah, mengubah, atau membuat karya turunan berdasarkan materi ini, Anda harus menyebarluaskan hasil karya tersebut di bawah lisensi yang sama (CC BY-NC-SA 4.0).
Arsip & Retensi: Penulis diizinkan untuk menyebarluaskan dan mengunggah karya mereka secara daring (misalnya di repositori institusi atau situs web pribadi) setelah publikasi, dengan tetap mencantumkan atribusi ke terbitan Jurnal Rotasi.
Penerbit: Departemen Teknik Mesin, Fakultas Teknik, Universitas Diponegoro
Alamat Redaksi: Gedung Administrasi Lantai II Departemen Teknik Mesin Fakultas Teknik Undip Telp.(024)7460059, Facsimile: (024)7460059 ext.102 Email: rotasi@live.undip.ac.id