skip to main content

AKUISISI DATA MENGGUNAKAN LABVIEW DENGAN ARDUINO SEBAGAI PERANGKAT KERAS BERBIAYA RENDAH

*Dadan Nurdin Bagenda scopus  -  Elektronika, Politeknik Negeri Bandung, Indonesia
Paula Santi Rudati  -  Elektronika, Politeknik Negeri Bandung, Indonesia

Citation Format:
Abstract
Industrial and academic laboratories cannot be separated from the use of DAQ, most of industrial automation generally requires massive amounts of DAQ and high speed. DAQ LabView software provides various facilities so that projects can be faster. Honestly, the price of hardware for DAQ is relatively expensive, luckily LabView give the opportunity to support ability many hardware including Arduino Board. Using the LINX library from Makerhub are free, so that the DAQ Practicum as industry standard can be done by affordable prices. The results without Linx, the average travel time for serial deliveries is 5.98 us/byte at 2Mbps. With Linx, "loop rate (Hz)" feature is valid as a 2-time (trigger-echo) measurement, and the data transmission time is below 20.41 ms, the digital DAQ of 2-way by (trigger-echo) is 20.41, also flip-flop transmission has an average time 13.7 ms/loop, also analog DAQ from LM35 have average time 7.87 ms/loop.

 

Note: This article has supplementary file(s).

Fulltext View|Download |  Research Instrument
Foto Oscilloscope
Subject pocket oscilloscope
Type Research Instrument
  View (782KB)    Indexing metadata
Keywords: Low Price DAQ; LabView; LINX; Arduino DAQ
Funding: Dadan Nurdin Bagenda, Politeknik Negeri Bandung;

Article Metrics:

  1. K. Sammy, 2014, LINX, LIFA & Arduino, Markerhub, 29 1 2014. [Online]. Available: https://forums.ni.com/t5/LabVIEW-Interface-for-Arduino/LINX-LIFA-Arduino/td-p/3372499?profile.language=en. [Accessed 10 7 2019]
  2. D. N. Bagenda and R. Hudaya, 2016, Pengaruh Struktur Pemrograman Dan Compiler Pada Kecepatan Operasi Menggunakan Arduino Uno, in SNTEI - Seminar National Teknik Elektro Dan Informatika, Makassar
  3. N. R and P. Krishna, 2013, Low Cost Data Acquisition and Control using Arduino Prototyping Platform and LabVIEW, International Journal of Science and Research (IJSR), , vol. 2, no. 2, pp. 366-369, February 2013
  4. N. Kanani and M. Thakker, 2015, Low Cost Data Acquisition System Using LABVIEW, 2nd International Conference on Multidisciplinary Research & Practice (IJRSI), vol. 3, no. 1, pp. 67-70
  5. A. E. Hammoumi, S. Motahhir, A. Chalh, A. El Ghzizal and A. Derouich, 2018, Real-time virtual instrumentation of Arduino and LabVIEW based PVpanel characteristics, A ElHammoumi, vol. 161, no. 1, pp. 1-12
  6. E. V. Beauchamp and E. Lozano, 2014, Comparing USB Data Acquisition Instruments Using Arduino and PIC18F4550 in LabVIEW and Matlab, International Journal Of Innovative Research In Electrical, Electronics, Instrumentation And Control Engineering, Vol. 2, No. 9, pp.1952-1958
  7. Texas Instruments, 2017, LM35 Precision Centigrade Temperature Sensors, SNIS159H – August 1999 – Revised December 2017

Last update:

No citation recorded.

Last update: 2024-11-23 18:35:46

No citation recorded.