DOI: https://doi.org/10.14710/vol15iss2pp152-158

Designing a Model for Bi-criteria Objective Scheduling at Flexible Flowshop Production in Finishing Furniture Industries

*Achmad Fawwaz Bahaudin  -  Industrial Management Engineering, Diponegoro University, Jalan Prof. H. Soedarto, S.H., Tembalang, Semarang, Indonesia 50275, Indonesia
Aries Susanty  -  Industrial Management Engineering, Diponegoro University, Jalan Prof. H. Soedarto, S.H., Tembalang, Semarang, Indonesia 50275, Indonesia
Singgih Saptadi  -  Industrial Management Engineering, Diponegoro University, Jalan Prof. H. Soedarto, S.H., Tembalang, Semarang, Indonesia 50275, Indonesia
Open Access Copyright (c) 2025 Jurnal Sistem Informasi Bisnis

Citation Format:
Abstract

The bi-criteria objective scheduling is essential in the Jepara furniture industry due to its competitiveness. Scheduling that not only considers the company's profits but also takes into account the customer's perspective can add significant value to the company. Based on that, this paper proposed a mathematical model for the furniture finishing industry. Then it transformed into a Microsoft Excel Solver model. Cost calculation is also considered to choose the best model. The system's characteristic is flexible flow shop production, not identical at the last stage,  and sequence-dependent set up time. The objective of scheduling is to minimize total maximum completion time and total weighted tardiness. There are 3 scenarios in this paper, company focused, customer, and bi-criteria objective. After running the model, scenario 3 is the best choice for completing priority orders on time, while scenario 1 is ideal when seeking efficiency in production with delays being less of a concern.

Fulltext View|Download
Keywords: Bi-Criteria Scheduling; Flexible Flow Shop; Furniture Finishing Industry; Microsoft Excel Solver; Total Weighted Tardiness; Sequence-Dependent Setup Time

Article Metrics:

Article Info
Section: Research Articles
Language : EN
Recent articles
Designing a Model for Bi-criteria Objective Scheduling at Flexible Flowshop Production in Finishing Furniture Industries Increasing the Accuracy of Random Forest Algorithm Using Bagging Techniques in Cases of Stunting Toddlers Review of Systematic Literature about Sentiment Analysis Techniques More recent articles
Most cited articles
Pengenalan Wajah dengan Matriks Kookurensi Aras Keabuan dan Jaringan Syaraf Tiruan Probabilistik Sistem Informasi Pengukuran Kinerja Pada Perkebunan Kelapa Sawit Dengan Menggunakan Metode Balanced Scorecard Penggunaan Jaringan Syaraf Tiruan Backpropagation Untuk Seleksi Penerimaan Mahasiswa Baru Pada Jurusan Teknik Komputer Di Politeknik Negeri Sriwijaya Sistem Gesture Accelerometer dengan Metode Fast Dynamic Time Warping (FastDTW) Sistem Panel Kinerja Untuk Program Studi Sarjana Berbasis BAN PT More cited articles
  1. Aqil, S., & Allali, K. (2018). Heuristics and metaheuristics for the bi-criterion optimization of the flexible flow shop scheduling problem with two stages. 2018 International Conference on Electronics, Control, Optimization and Computer Science (ICECOCS) (pp. 1–6). IEEE. https://doi.org/10.1109/ICECOCS.2018.8610620
  2. Bozorgirad, M. A., & Logendran, R. (2016). A comparison of local search algorithms with population-based algorithms in hybrid flow shop scheduling problems with realistic characteristics. International Journal of Advanced Manufacturing Technology, 83, 1135–1151. https://doi.org/10.1007/s00170-015-7650-9
  3. Golneshini, F. P., & Fazlollahtabar, H. (2019). Meta-heuristic algorithms for a clustering-based fuzzy bi-criteria hybrid flow shop scheduling problem. Soft Computing, 23(22), 12103–12122. https://doi.org/10.1007/s00500-019-03767-0
  4. González-Neira, E. M., García-Cáceres, R. G., Caballero-Villalobos, J. P., Molina-Sánchez, L. P., & Montoya-Torres, J. R. (2016). Stochastic flexible flow shop scheduling problem under quantitative and qualitative decision criteria. Computers & Industrial Engineering, 101, 128–144. https://doi.org/10.1016/j.cie.2016.08.026
  5. Khalfallah, S., & Nabli, Z. (2018). A hybrid data envelopment analysis_decision tree approach to evaluate the bi-criteria flow shop with blocking problem. International Journal of Operational Research, 32(2), 201–222. https://doi.org/10.1504/IJOR.2018.092014
  6. Melati, M., Purnomo, H., & Shantiko, B. (2013). Making research work for small-scale furniture makers: Action research in the Jepara furniture industry, Indonesia. Bogor, Indonesia: CIFOR
  7. Neufeld, J. S., Gupta, J. N., & Buscher, U. (2016). A comprehensive review of flowshop group scheduling literature. Computers & Operations Research, 70, 56–74. https://doi.org/10.1016/j.cor.2015.12.006
  8. Pargar, F., Zandieh, M., Kauppila, O., & Kujala, J. (2018). The effect of worker learning on scheduling jobs in a hybrid flow shop: A bi-objective approach. Journal of Systems Science and Engineering, 27(1), 1–27. https://doi.org/10.1007/s11518-018-5361-0
  9. Shahvari, O., & Logendran, R. (2016). Hybrid flow shop batching and scheduling with a bi-criteria objective. International Journal of Production Economics, 178, 239–258. https://doi.org/10.1016/j.ijpe.2016.06.005
  10. Tyagi, N., Tripathi, R. P., & Chandramouli, A. B. (2016). Flexible flowshop scheduling model with four stages. Indian Journal of Science and Technology, 9(42), 1–11. https://doi.org/10.17485/ijst/2016/v9i42/101905
  11. Vaisi, B., Farughi, H., & Raissi, S. (2018). Bi-criteria robotic cell scheduling and operation allocation in the presence of break-downs. International Journal of Industrial Engineering & Production Research, 29(3), 343–357. https://doi.org/10.22068/ijiepr.29.3.343
  12. Wang, S., Wang, X., Chu, F., & Yu, J. (2019). An energy-efficient two-stage hybrid flow shop scheduling problem in a glass production. International Journal of Production Research, 58(8), 1–33. https://doi.org/10.1080/00207543.2019.1624857
  13. Xue, J., & Wang, Y. (2023). Multi-objective optimization of a flexible flowshop scheduling problem with fuzzy processing times using an improved MOEA/D algorithm. Applied Soft Computing, 137, 109946. https://doi.org/10.1016/j.asoc.2022.109946
  14. Yang, Z., & Liu, C. (2018). A multi-objective genetic algorithm for a fuzzy parallel blocking flow shop scheduling problem. Academic Journal of Manufacturing Engineering, 16(2)
  15. Yu, C., Andreotti, P., & Semeraro, Q. (2020). Multi-objective scheduling in hybrid flow shop: Evolutionary algorithms using multi-decoding framework. Computers & Industrial Engineering, 147, 106570. https://doi.org/10.1080/00207543.2019.1624857

Last update:

No citation recorded.

Last update: 2025-06-14 04:37:11

No citation recorded.