PERANCANGAN KAPAL UNTUK MENUNJANG KEGIATAN PARIWISATA DI WADUK JATILUHUR, PURWAKARTA

Abstract

Jatiluhur had the very big tourism potency so that it was required the supporting mean such as the tour ship which was better than the wooden ship. The research about the tour ship design having a catamaran hull form was expected to help the development of potencial tourism in Jatiluhur reservoir.

In conducting this research, there were several research designs used those were the principle dimension, lines plan, general arrangement, hydrostatic analysis, stability analysis and ship motion analysis. Furthermore, it was used the selection of ship equipments and main engine which is based on result of motor power calculation appropriate for resistance against ship.

 The result of this tourist ship design was in the form of hydrostatic analysis, general arrangement, the analysis of stability and ship motion. The resulth shown by the hydrostatic analysis was that the buoyancy located behind the midship as far as 0.469 m. In addition, the result of general arrangement indicated that this tour ship had enough rooms to store all the ship equipment and it was able to carry the passangers with the maximum capacity of twenty people. In a review analysis of stability, it was shown that the largest GZ value was 2,009 m in the ten condition in which it carried ten passangers on the left side with a consumable weight of 100%. This tour ship had a good ship motion in which the deck wetness was not occurred when the wave happened as 0,70 m with the wave heading of 90° having a value of amplitudo heave motion of 0,176 m, the pitchmotion of 1,04 °, and roll motion of 2,99 °.