skip to main content

PEMBUATAN SPESIMEN UJI LELAH TIPE CONTINUOUS RADIUS MENGGUNAKAN MESIN BUBUT CNC

*Agus Suprihanto  -  Staff pengajar jurusan teknik mesin fakultas teknik UNDIP, Indonesia
Dwi Basuki Wibowo  -  Staff pengajar jurusan teknik mesin fakultas teknik UNDIP, Indonesia
IGN Wiratmaja Puja  -  Staf pengajar Jurusan Teknik Mesin FTI-ITB, Indonesia

Citation Format:
Abstract
Ones of considerations of design are fatigue failures. The fatigue failures are related with fatigue strength of
specimens. The fatigue strength of materials usually resulted by fatigue testing. The results of the testing are influenced
by some factors ie. machining process of specimens.
The goal of this research is to give a proposed machining process of fatigue test specimens with CNC lathe
machines. The proposed machining process can be eliminated the effects of machining from fatigue testing result.
One examples of CNC lathe programming have been sucessfuly composed for fatigue test specimens type
continuous radius. This specimen has 9,3mm minor diameter and 16mm major diameter. G and M code which used are
G00, G~1, G02, M92, M99 and M30.
Fulltext View|Download

Article Metrics:

Last update:

No citation recorded.

Last update: 2024-02-29 22:13:07

No citation recorded.