DOI: https://doi.org/10.14710/rotasi.8.3.41-46

ANALISA CACAT COR PADA PROSES PENGECORAN BURNER KOMPOR

*Sugeng Tirta Atmadja  -  Staff pengajar jurusan teknik mesin UNDIP, Indonesia

Citation Format:
Abstract
Objective of this research is to analyse casting defect in burner casting process. The research have been conducted in Small Medium Enterprise PT. Suyuti Sido Maju. Casting deffects were observeb by visual inspection. There are some casting deffect such as : cold shut, shearing and void.
Composition of casting product, pouring temperature and characterization of sand casting have been done to investigate the casting process that caused casting deffect.
Fulltext View|Download

Article Metrics:

Article Info
Section: Articles research
Language : EN
Recent articles
AN ELLIPTIC ELASTIC-PLASTIC ASPERITY MICRO-CONTACT MODEL ACTIVE MAGNETIC BEARINGS FOR FRICTIONLESS ROTATING MACHINERIES PEMODELAN PEMESINAN UNTUK PREDIKSI DEFORMASI BENDA KERJA DALAM SISTEM FIXTURE DENGAN METODE ELEMEN HINGGA More recent articles
Most cited articles
Pengaruh Post Weld Heat Treatment (Pwht) dengan Pemanas Induksi Terhadap Sifat Mekanik dan Struktur Mikro Sambungan Las Shield Metal Arc Welding (Smaw) pada Pipa API 5l X52 PENGARUH PERUBAHAN SAAT PENYALAAN (IGNITION TIMING) TERHADAP PRESTASI MESIN PADA SEPEDA MOTOR 4 LANGKAH DENGAN BAHAN BAKAR LPG PENGEMBANGAN PERANCANGAN AIRFOIL SUDU TURBIN ANGIN KECEPATAN RENDAH BERBASIS KOMPUTASI CERDAS PENGGUNAAN PARAFFIN WAX SEBAGAI PENYIMPAN KALOR PADA PEMANAS AIR TENAGA MATAHARI THERMOSYPHON FLUKTUASI BEDA TEKANAN DARI POLA ALIRAN SLUG AIR-UDARA PADA ALIRAN DUA FASE SEARAH PIPA HORIZONTAL More cited articles

Last update:

No citation recorded.

Last update: 2024-11-19 19:37:49

No citation recorded.