BibTex Citation Data :
@article{ROTASI3727, author = {Jamari Jamari}, title = {MEASUREMENT OF THE SURFACE TOPOGRAPHY CHANGE ON A BOUNDARY LUBRICATED RECIPROCATING SLIDING CONTACT}, journal = {ROTASI}, volume = {10}, number = {2}, year = {2012}, keywords = {measurement, roughness, sliding contact}, abstract = { This paper presents experiments to study the change of the surface topography on a boundary lubricated reciprocating sliding contact system. A Micromap 512 optical profilometer is employed for measuring surface characteristics. The change of the surface topography before and after the experiment is determined in detail and accurate (microscopically) by the Matching and Stitching method. Plot of the profile of the surface roughness for a certain number of running-in cycles were presented in a figure for before, after and difference, so that analysis of the surface topography change can be accurately performed }, issn = {2406-9620}, pages = {10--12} doi = {10.14710/rotasi.10.2.10-12}, url = {https://ejournal.undip.ac.id/index.php/rotasi/article/view/3727} }
Refworks Citation Data :
This paper presents experiments to study the change of the surface topography on a boundary lubricated reciprocating sliding contact system. A Micromap 512 optical profilometer is employed for measuring surface characteristics. The change of the surface topography before and after the experiment is determined in detail and accurate (microscopically) by the Matching and Stitching method. Plot of the profile of the surface roughness for a certain number of running-in cycles were presented in a figure for before, after and difference, so that analysis of the surface topography change can be accurately performed
Article Metrics:
Last update:
Last update: 2026-11-19 04:06:55
Hak Cipta: Penulis memegang hak cipta atas artikel mereka dan memberikan hak publikasi pertama kepada Jurnal Rotasi.
Lisensi Terbitan: Semua artikel disebarluaskan di bawah lisensi Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License (CC BY-NC-SA 4.0), yang mengizinkan pihak lain untuk menyalin, mendistribusikan, menampilkan, serta membuat karya turunan dari artikel ini dengan ketentuan:
Attribution (BY): Wajib memberikan pencantuman kredit/penghargaan yang sesuai kepada penulis asli dan Jurnal Rotasi sebagai penerbit pertama, menyertakan tautan lisensi, dan menunjukkan jika ada perubahan yang dilakukan.
NonCommercial (NC): Karya tidak boleh digunakan untuk tujuan komersial atau mencari keuntungan finansial tanpa izin tertulis dari pemegang hak cipta.
ShareAlike (SA): Jika Anda menggubah, mengubah, atau membuat karya turunan berdasarkan materi ini, Anda harus menyebarluaskan hasil karya tersebut di bawah lisensi yang sama (CC BY-NC-SA 4.0).
Arsip & Retensi: Penulis diizinkan untuk menyebarluaskan dan mengunggah karya mereka secara daring (misalnya di repositori institusi atau situs web pribadi) setelah publikasi, dengan tetap mencantumkan atribusi ke terbitan Jurnal Rotasi.
Penerbit: Departemen Teknik Mesin, Fakultas Teknik, Universitas Diponegoro
Alamat Redaksi: Gedung Administrasi Lantai II Departemen Teknik Mesin Fakultas Teknik Undip Telp.(024)7460059, Facsimile: (024)7460059 ext.102 Email: rotasi@live.undip.ac.id