BibTex Citation Data :
@article{ROTASI5181, author = {Munadi Munadi}, title = {ANALISA FORWARD KINEMATIC PADA SIMULATOR ARM ROBOT 5 DOF YANG MENGINTEGRASIKAN MIKROKONTROLER ARDUINO-UNO DAN LABVIEW}, journal = {ROTASI}, volume = {15}, number = {2}, year = {2013}, keywords = {arm robot, robot manipulator, Arduino, LabView, forward kinematic}, abstract = {An arm robot simulator has been developed, that capable in simulating a 5 degree of freedom robot manipulator, in which it was equipped with two-finger gripper mechanism at end-effector. This simulator is designed for educational purposes so that many students can easily understand when learning about robot manipulator. The simulator was developed using Ardiuno Uno with LabVIEW through the Firmata interface for controlling the actuators (servo motors). Ardiuno Uno was chosen because it can interact with LabVIEW that will be able to control the angular position of servo motor easily. Angular position errors that occur on the servo motor can be solved by using a numerical program functions and numerical multiply divided on LabVIEW. For analysis, this paper presents the forward kinematics problem which is concerned with the relationship between the individual joints of the arm robot simulator and the position and orientation of the tool or end-effector. The analysis result is carried out in MATLAB.}, issn = {2406-9620}, pages = {37--43} doi = {10.14710/rotasi.15.2.37-43}, url = {https://ejournal.undip.ac.id/index.php/rotasi/article/view/5181} }
Refworks Citation Data :
Article Metrics:
Last update:
Self service food corner (SSFC) based on smart system to support modernization of canteen or restaurant services and prevention of Covid-19
Last update: 2026-11-18 03:11:57
Hak Cipta: Penulis memegang hak cipta atas artikel mereka dan memberikan hak publikasi pertama kepada Jurnal Rotasi.
Lisensi Terbitan: Semua artikel disebarluaskan di bawah lisensi Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License (CC BY-NC-SA 4.0), yang mengizinkan pihak lain untuk menyalin, mendistribusikan, menampilkan, serta membuat karya turunan dari artikel ini dengan ketentuan:
Attribution (BY): Wajib memberikan pencantuman kredit/penghargaan yang sesuai kepada penulis asli dan Jurnal Rotasi sebagai penerbit pertama, menyertakan tautan lisensi, dan menunjukkan jika ada perubahan yang dilakukan.
NonCommercial (NC): Karya tidak boleh digunakan untuk tujuan komersial atau mencari keuntungan finansial tanpa izin tertulis dari pemegang hak cipta.
ShareAlike (SA): Jika Anda menggubah, mengubah, atau membuat karya turunan berdasarkan materi ini, Anda harus menyebarluaskan hasil karya tersebut di bawah lisensi yang sama (CC BY-NC-SA 4.0).
Arsip & Retensi: Penulis diizinkan untuk menyebarluaskan dan mengunggah karya mereka secara daring (misalnya di repositori institusi atau situs web pribadi) setelah publikasi, dengan tetap mencantumkan atribusi ke terbitan Jurnal Rotasi.
Penerbit: Departemen Teknik Mesin, Fakultas Teknik, Universitas Diponegoro
Alamat Redaksi: Gedung Administrasi Lantai II Departemen Teknik Mesin Fakultas Teknik Undip Telp.(024)7460059, Facsimile: (024)7460059 ext.102 Email: rotasi@live.undip.ac.id