DOI: https://doi.org/10.14710/rotasi.26.1.52-61

Improvisasi Metode Biseksi pada Maximum Power Point Tracking (MPPT) dengan Menggunakan Algoritma Incremental Conductance

*Muhammad Nizar Habibi  -  Departemen Teknik Elektro, Indonesia
Novie Ayub Windarko  -  Departemen Teknik Elektro, Indonesia
Moh. Zaenal Efendi  -  Departemen Teknik Elektro, Indonesia
Rachma Prilian Eviningsih  -  Departemen Teknik Elektro, Indonesia
Luki Septya Mahendra  -  Departemen Teknik Elektro, Indonesia
Sony Junianto  -  Departemen Teknik Mekanika dan Energi, Indonesia
Open Access Copyright (c) 2023 ROTASI

Citation Format:
Abstract
The solar energy potential reaches 207.8 GWp in Indonesia, providing numerous opportunities to harness renewable energy. One approach is utilizing solar panels; however, these panels have a low energy conversion rate. Maximum Power Point Tracking (MPPT) is a technique that can maximize the performance of solar panels to consistently generate maximum power. Bisection MPPT is implemented in the system due to its ease of implementation, but it performs less effectively under low irradiance. The Incremental Conductance algorithm is a suitable choice for improving Bisection MPPT. Apart from being easy to implement, the Incremental Conductance algorithm is not dependent on the characteristics of the solar panel. It also features Variable Step Size to eliminate ripple when reaching the maximum power of the solar panel. Incremental Conductance MPPT can enhance Bisection MPPT with a maximum increase of 17,483 Watts. The Bisection-Incremental Conductance MPPT algorithm takes 2.122 seconds to reach the maximum power of the solar panel, generating 1.89 x 10^6 Ws of energy for 0.4 seconds. It yields the highest value compared to Bisection MPPT and Incremental Conductance MPPT.
Fulltext View|Download Email colleagues
Keywords: Maximum Power Point Tracking, Bisection, Incremental Conductance

Article Metrics:

Article Info
Section: Articles research
Language : ID
Most cited articles
PERHITUNGAN EFISIENSI DAN KONVERSI DARI BAHAN BAKAR SOLAR KE GAS PADA BOILER EBARA HKL 1800 KA Pengaruh konsentrasi larutan dan kuat arus terhadap ketebalan pada proses pelapisan nikel untuk baja karbon rendah PENGARUH PERUBAHAN SUDUT PENYALAAN (IGNITION TIME) TERHADAP EMSISI GAS BUANG PADA MESIN SEPEDA MOTOR 4 (EMPAT) LANGKAH DENGAN BAHAN BAKAR LPG PERHITUNGAN EFISIENSI DAN KONVERSI DARI BAHAN BAKAR SOLAR KE GAS PADA BOILER EBARA HKL 1800 KA Pengukuran Distribusi Beban Telapak Kaki Manusia Saat Berdiri Tegak Menggunakan Sensor FSR 402 More cited articles

Last update:

No citation recorded.

Last update: 2026-10-28 16:43:35

No citation recorded.