BibTex Citation Data :
@article{ROTASI8557, author = {Agus Hariyanto and Triyono Triyono and Agus Supriyanto}, title = {PENGARUH TEMPERATUR TERHADAP SIFAT FISIK MEKANIK PADA SAMBUNGAN DIFUSI LOGAM TAK SEJENIS ANTARA SS400 DENGAN Al6061}, journal = {ROTASI}, volume = {17}, number = {2}, year = {2015}, keywords = {Diffudion welding; Filler; Heat treatment; Intermetalic layer; Temperature}, abstract = {Diffusion welding on the disimilar metal between steel SS400 and aluminum Al6061 by using induction furnace, the temperature variation and filler variation. Temperature variations that are used 850⁰C, 875⁰C and 900⁰C. Filler that is used Fe and Cu powders, in variations filler Fe / Cu: 70/30%, 75/25%, 80/20%, on 30 minutes holding time. The results shows there is the presence of intermetallic layers in the temperaturs. Results of Scanning Electron Microscop (SEM), good diffusion process occurs on temperatures 850⁰C and filler variations Fe: 75%, Cu: 25%. It occurs interface bonding steel and aluminum on diffusion area. Interface bonding steel and aluminum will produces intermetalic layer Fe2Al3. The results of good hardness distribution occurs on 900⁰C filler variations Fe: 75%, Cu: 25%. It occurs intermetalic layer formation on diffusion area. Intermetalic layer formation is influenced by heat treatment and diffusion of Fe atoms and Cu atoms. The higher the heat treatment, the harder the Cu atoms. So it will affect the hardness intermetalic layer. By the higher heat treatment, the microstructure of the coating intermetalic will be so close. The more tightly layered arrangement intermatalic blistering effect on shear test. The results of tensile shear testing, high voltage value occurs on 900⁰C filler variations Fe: 75%, Cu: 25%. It is influenced by a continuous heating process, thus causing the Cu atoms will be hard. With high heat, Fe atoms will diffuse to the base metal aluminum and copper atoms will diffuse to the base metal and Al6061 SS400. So that the Fe and Cu atoms will bond with the base metal that affects the mechanical properties.}, issn = {2406-9620}, pages = {57--66} doi = {10.14710/rotasi.17.2.57-66}, url = {https://ejournal.undip.ac.id/index.php/rotasi/article/view/8557} }
Refworks Citation Data :
Article Metrics:
Last update:
Last update: 2026-11-18 14:12:38
Hak Cipta: Penulis memegang hak cipta atas artikel mereka dan memberikan hak publikasi pertama kepada Jurnal Rotasi.
Lisensi Terbitan: Semua artikel disebarluaskan di bawah lisensi Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License (CC BY-NC-SA 4.0), yang mengizinkan pihak lain untuk menyalin, mendistribusikan, menampilkan, serta membuat karya turunan dari artikel ini dengan ketentuan:
Attribution (BY): Wajib memberikan pencantuman kredit/penghargaan yang sesuai kepada penulis asli dan Jurnal Rotasi sebagai penerbit pertama, menyertakan tautan lisensi, dan menunjukkan jika ada perubahan yang dilakukan.
NonCommercial (NC): Karya tidak boleh digunakan untuk tujuan komersial atau mencari keuntungan finansial tanpa izin tertulis dari pemegang hak cipta.
ShareAlike (SA): Jika Anda menggubah, mengubah, atau membuat karya turunan berdasarkan materi ini, Anda harus menyebarluaskan hasil karya tersebut di bawah lisensi yang sama (CC BY-NC-SA 4.0).
Arsip & Retensi: Penulis diizinkan untuk menyebarluaskan dan mengunggah karya mereka secara daring (misalnya di repositori institusi atau situs web pribadi) setelah publikasi, dengan tetap mencantumkan atribusi ke terbitan Jurnal Rotasi.
Penerbit: Departemen Teknik Mesin, Fakultas Teknik, Universitas Diponegoro
Alamat Redaksi: Gedung Administrasi Lantai II Departemen Teknik Mesin Fakultas Teknik Undip Telp.(024)7460059, Facsimile: (024)7460059 ext.102 Email: rotasi@live.undip.ac.id