Vol 26, No 4 (2024): VOLUME 26, NOMOR 4, OKTOBER 2024

General information

Published:	05-11-2024
Total Articles: (including Editorial)	8
Total Authors:	32

Total authors' affiliations (14)

	PT PLN (Persero) Puslitbang Ketenagalistrikan
	Universitas Diponegoro
	Kota Depok 16515
	Diponegoro University
	Tembalang-Semarang 50275
	Universitas Negeri Semarang
	Kampus UNNES Sekaran Gunungpati Semarang 50229
	INTI International University
	Malaysia
	Universitas Muria Kudus
	Jawa Tengah 59327
	Indonesia 35365
	Indonesia
	Universitas Negeri Medan

Issues list

Vol 26, No 4 (2024): VOLUME 26, NOMOR 4, OKTOBER 2024 Vol 26, No 3 (2024): VOLUME 26, NOMOR 3, JULI 2024 Vol 26, No 2 (2024): VOLUME 26, NOMOR 2, APRIL 2024 Vol 26, No 1 (2024): VOLUME 26, NOMOR 1, JANUARI 2024 Vol 25, No 4 (2023): VOLUME 25, NOMOR 4, OKTOBER 2023 Vol 25, No 3 (2023): VOLUME 25, NOMOR 3, JULI 2023 Vol 25, No 2 (2023): VOLUME 25, NOMOR 2, APRIL 2023 Vol 25, No 1 (2023): VOLUME 25, NOMOR 1, JANUARI 2023 Vol 24, No 4 (2022): VOLUME 24, NOMOR 4, OKTOBER 2022 Complete issues

Vol 26, No 4 (2024): VOLUME 26, NOMOR 4, OKTOBER 2024

Table of Contents

Articles research

	Material characteristics and failure prediction of SA 213 Superheater Boiler tube in power plant with 315 MW capacity Ariyana Dwiputra Nugraha, Harianto Harianto, Agus Suprihanto, Sulardjaka Sulardjaka \| Language: EN \| DOI: 10.14710/rotasi.26.4.1-5 Received: 2 Oct 2024; Revised: 9 Oct 2024; Accepted: 16 Oct 2024; Available online: 30 Oct 2024; Published: 29 Oct 2024.	PDF 1-5
	Analisis Computational Fluid Dynamic (CFD) Pengaruh Overlap Ratio dan Jarak Bilah Berlapis pada Kinerja Turbin Angin Savonius Bilah Berlapis Jerico David, Fahrudin Fahrudin, Damora Rhakasywi \| Language: ID \| DOI: 10.14710/rotasi.26.4.6-12 Received: 2 Oct 2024; Revised: 11 Oct 2024; Accepted: 24 Oct 2024; Available online: 30 Oct 2024; Published: 29 Oct 2024.	PDF 6-12
	Development of Footprint Analysis Software Using the Cavanagh Arch Index Method Based on a MATLAB GUI Yusuf Umardani, Dwi Basuki Wibowo, Agus Suprihanto, Mohammad Rizqi Abdul Basyith \| Language: EN \| DOI: 10.14710/rotasi.26.4.13-26 Received: 11 Oct 2024; Revised: 11 Oct 2024; Accepted: 24 Oct 2024; Available online: 30 Oct 2024; Published: 29 Oct 2024.	PDF 13-26
	Analisis Parameter Fisik Filamen Biokomposit PLA PCL HA Hasil Proses Ekstrusi Wahyu Hidayat, Athanasius Priharyoto Bayuseno, Rifky Ismail, Deni Fajar Fitriyana, Tezara Cionita, Hartanto Prawibowo \| Language: ID \| DOI: 10.14710/rotasi.26.4.27-32 Received: 2 Oct 2024; Revised: 24 Oct 2024; Accepted: 24 Oct 2024; Available online: 30 Oct 2024; Published: 29 Oct 2024.	PDF 27-32
	PROSES MANUFAKTUR LENGAN PROSTESIS BERBASIS PENGGERAK KABEL HARNESS MENGGUNAKAN TEKNOLOGI 3D PRINTING Akhmad Zidni Hudaya, Rochmad Winarso, Nafaqotur Rohman \| Language: EN \| DOI: 10.14710/rotasi.26.4.33-46 Received: 2 Oct 2024; Revised: 11 Oct 2024; Accepted: 24 Oct 2024; Available online: 30 Oct 2024; Published: 29 Oct 2024.	PDF 33-46
	Simulation Study of Pin-Type Heatsinks on Convection Heat Transfer Characteristics in Electronic Devices Noverto Zhorif Chaniago, Devia Gahana Cindi Alfian, Muhammad Syaukani, Eko Pujiyulianto, Fajar Perdana Nurullah, Dicky Januarizky Silitonga \| Language: EN \| DOI: 10.14710/rotasi.26.4.47-53 Received: 2 Oct 2024; Revised: 11 Oct 2024; Accepted: 24 Oct 2024; Available online: 30 Oct 2024; Published: 29 Oct 2024.	PDF 47-53
	Design and Fabrication of Jig and Fixture for Milling Operations in the Manufacturing Sector Rizal Indrawan, Dhika Aditya Purnomo, Fipka Bisono, Bayu Wiro Karuniawan, Ridhani Anita Fajardini \| Language: EN \| DOI: 10.14710/rotasi.26.4.54-59 Received: 2 Oct 2024; Revised: 11 Oct 2024; Accepted: 24 Oct 2024; Available online: 30 Oct 2024; Published: 29 Oct 2024.	PDF 54-59
	Experimental Study of the Use of Rubber Seeds as Biodiesel Feedstocks; Production Optimization, Characterization and Performance Testing Bisrul Hapis Tambunan \| Language: EN \| DOI: 10.14710/rotasi.26.4.60-70 Received: 2 Oct 2024; Revised: 11 Oct 2024; Accepted: 24 Oct 2024; Available online: 30 Oct 2024; Published: 29 Oct 2024.	PDF 60-70

Penerbit: Departemen Teknik Mesin, Fakultas Teknik, Universitas Diponegoro

Alamat Redaksi: Gedung Administrasi Lantai II Departemen Teknik Mesin Fakultas Teknik Undip Telp.(024)7460059, Facsimile: (024)7460059 ext.102 Email: rotasi@live.undip.ac.id

Creative Commons License

Rotasi by http://ejournal.undip.ac.id/index.php/rotasi is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

View statistics

Hit counters

Undip Electronic Journal System (UEJS) - Copyright ©2024 Universitas Diponegoro. Powered by Public Knowledge Project OJS and Mason Publishing OJS theme.