Vol 25, No 4 (2023): VOLUME 25, NOMOR 4, OKTOBER 2023

General information

Published:	13-10-2023
Total Articles: (including Editorial)	11
Total Authors:	37
Total Countries:	2

Total affiliation countries (2)

	Indonesia	(40)
		(1)

Total authors' affiliations (13)

	Universitas Diponegoro
	Universitas Muria Kudus
	Universitas Sunan Muria Kudus
	Institut Teknologi Dirgantara Adisutjipto
	Pusat Riset Teknologi Daur Bahan Bakar Nuklir dan Limbah Radioaktif - BRIN
	Sekolah Tinggi Teknologi Warga Surakarta
	Indonesia
	Universitas Gadjah Mada Yogyakarta
	Universitas Islam Indonesia
	Indonesia 30139
	Indonesia 50275
	Universitas Bandar Lampung
	mechanical engineering mataram university

Issues list

Vol 26, No 2 (2024): VOLUME 26, NOMOR 2, APRIL 2024 Vol 26, No 1 (2024): VOLUME 26, NOMOR 1, JANUARI 2024 Vol 25, No 4 (2023): VOLUME 25, NOMOR 4, OKTOBER 2023 Vol 25, No 3 (2023): VOLUME 25, NOMOR 3, JULI 2023 Vol 25, No 2 (2023): VOLUME 25, NOMOR 2, APRIL 2023 Vol 25, No 1 (2023): VOLUME 25, NOMOR 1, JANUARI 2023 Vol 24, No 4 (2022): VOLUME 24, NOMOR 4, OKTOBER 2022 Vol 24, No 3 (2022): VOLUME 24, NOMOR 3, JULI 2022 Vol 24, No 2 (2022): VOLUME 24, NOMOR 2, APRIL 2022 Complete issues

Vol 25, No 4 (2023): VOLUME 25, NOMOR 4, OKTOBER 2023

Table of Contents

Front Matter

Front Matter Rotasi Vol. 25 No. 4 Oktober 2023

| DOI: 10.14710/rotasi.25.4.i-v

Published: 31 Oct 2023.

PDF

i-v

Articles research

	Studi Numerik Evaluasi Kinerja Liquid-Liquid Cylindrical Cyclone (LLCC) Sebagai Oil-Water Separator Shofwan Bahar, Sugoro Bhakti Sutono, Akhmad Zidni Hudayaa, Qomaruddin Qomaruddin, Okto Dinaryanto, Hanif Ghufron, Achmad Noor Faizi \| Language: ID \| DOI: 10.14710/rotasi.25.4.1-6 Received: 23 Sep 2023; Revised: 29 Sep 2023; Accepted: 5 Oct 2023; Available online: 13 Oct 2023; Published: 12 Oct 2023.	PDF 1-6
	Optimasi Parameter Proses 3D Printing pada Pencetakan Model Tooth Bucket menggunakan Nozzle 0,6 mm Deni Andriyansyah, Roedy Kristiyono, M. Chamim, Herianto Herianto \| Language: ID \| DOI: 10.14710/rotasi.25.4.7-13 Received: 2 Oct 2023; Revised: 11 Oct 2023; Accepted: 24 Oct 2023; Available online: 30 Oct 2023; Published: 31 Oct 2023.	PDF 7-13
	Analisis Sifat Mekanik dan Tribologi pada Cakram Baru dan Bekas Muhammad Khafidh, Santo Ajie Dhewanto, Muhammad Alfaarisi Maulana Kasim, Yustiasih Purwaningrum \| Language: ID \| DOI: 10.14710/rotasi.25.4.14-22 Received: 2 Oct 2023; Revised: 11 Oct 2023; Accepted: 24 Oct 2023; Available online: 31 Oct 2023; Published: 30 Oct 2023.	PDF 14-22
	Perancangan Shell and Tube Heat Exchanger Dengan Fluida Kerja Biogas Palm Oil Mill Effluent (POME) Ahmad Imam Rifa'i, Devita Dinda Dinda Fitriani, Dicky Seprianto, Soegeng Witjahjo \| Language: ID \| DOI: 10.14710/rotasi.25.4.23-30 Received: 2 Oct 2023; Revised: 11 Oct 2023; Accepted: 24 Oct 2023; Available online: 31 Oct 2023; Published: 30 Oct 2023.	PDF 23-30
	Prototyping Smart Maintenance System Berbasis Augmented Reality Untuk Steam Turbine Di PLTP Paryanto Paryanto, Rizqi Diaz Surya, Rusnaldy Rusnaldy \| Language: ID \| DOI: 10.14710/rotasi.25.4.31-42 Received: 2 Oct 2023; Revised: 11 Oct 2023; Accepted: 24 Oct 2023; Available online: 31 Oct 2023; Published: 30 Oct 2023.	PDF 31-42
	Accuracy Assessment of Azimuth, Elevation, and Time data resulted from using actual TLE and simulated-outdated TLE for tracking LAPAN-A2 Satellite Joga Dharma Setiawan, Muhammad Ario Ilham F, Ismoyo Haryanto, Riza Muhida \| Language: EN \| DOI: 10.14710/rotasi.25.4.%p Received: 2 Oct 2023; Revised: 11 Oct 2023; Accepted: 24 Oct 2023; Available online: 31 Oct 2023; Published: 30 Oct 2023.	PDF 43-52
	Studi Numerik Pengaruh Geometri Dasar Laut Berbentuk Convex Terhadap Performa Hidrodinamis Oscillating Water Column (OWC) pada Gelombang Pendek Wahyu Nur Fadilah, Sony Junianto, Nu Rhahida Arini, Joke Pratilastiarso \| Language: ID \| DOI: 10.14710/rotasi.25.4.53-59 Received: 2 Oct 2023; Revised: 11 Oct 2023; Accepted: 24 Oct 2023; Available online: 31 Oct 2023; Published: 30 Oct 2023.	PDF 53-59
	Pemanfaatan Bubble Flame Untuk Implementasi Proses Brazing Adi Tri Setyoko, Susilo Adi Widyanto, Gunawan Dwi Haryadi \| Language: EN \| DOI: 10.14710/rotasi.25.4.60-67 Received: 2 Oct 2023; Revised: 11 Oct 2023; Accepted: 24 Oct 2023; Available online: 31 Oct 2023; Published: 30 Oct 2023.	PDF 60-67
	The Effect of Various Two-wheeler Camshaft Materials on Dynamic Response Using Finite Element Analysis Hendry Sakke Tira, Ikhsan Dwilingga \| Language: EN \| DOI: 10.14710/rotasi.25.4.68-74 Received: 2 Oct 2023; Revised: 11 Oct 2023; Accepted: 24 Oct 2023; Available online: 31 Oct 2023; Published: 30 Oct 2023.	PDF 68-74

Back Matter

Back Matter Rotasi Vol. 25 No. 4 Oktober 2023

| DOI: 10.14710/rotasi.25.4.App. 1-4

Published: 31 Oct 2023.

PDF

App. 1-4

Penerbit: Departemen Teknik Mesin, Fakultas Teknik, Universitas Diponegoro

Alamat Redaksi: Gedung Administrasi Lantai II Departemen Teknik Mesin Fakultas Teknik Undip Telp.(024)7460059, Facsimile: (024)7460059 ext.102 Email: rotasi@live.undip.ac.id

Creative Commons License

Rotasi by http://ejournal.undip.ac.id/index.php/rotasi is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

View statistics

Hit counters

Copyright ©2024 Universitas Diponegoro. Powered by Public Knowledge Project OJS and Mason Publishing OJS theme.