DOI: https://doi.org/10.14710/teknik.v39i2.17883

Accuracy Analysis Of Three Dimensional Models Of Building Prof. H. Soedarto S. H. Using The Terrestrial Laser Scanner Technology Based On Traverse Method

Analisis Akurasi Model Tiga Dimensi Gedung Prof. H. Soedarto, SH. Menggunakan Teknologi Terrestrial Laser Scanner (TLS) Berbasis Metode Traverse

*Yudo Prasetyo orcid scopus  -  Department of Geodetic, Faculty of Engineering, Diponegoro University, Indonesia
Open Access Copyright (c) 2019 Teknik

Citation Format:
Abstract

The technology to record spatial building for conservation and spatial planning is growing rapidly. The urgency of the accuracy level in a measurement were set up higher than it used to. Three-dimensional object forming using Terrestrial Laser Scanner (TLS) equipment was one of the popular technologies among all. The TLS measurement method consists of 4 methods: Cloud to Cloud, Target to Target, Traverse, and hybrid method. This research aims to analyse the accuracy level of the Traverse method in measuring an 3D object for building documentation purposes using TLS. The accuracy level of Traverse method will be tested onto Building of Prof. Soedarto, S. H. There are two parameters used in validating the accuracy level of Traverse method: registration methods and visualization results of the three-dimensional model. The analysis result of point cloud data shows that TLS equipment applied with Traverse method is capable of producing 3D model of Building of Prof. H. Soedarto S. H. The obtained average validation value is 0.004 meters with the accuracy level of the RMSE model of ± 0.00611 meters

Fulltext View|Download
Keywords: 3D Model, Buildingg of Prof. H. Soedarto S. H.; Traverse Method, Terrestrial Laser Scanner

Article Metrics:

Article Info
Section: Artikel
Language : EN
Recent articles
Analysis of Shaping Factors of Urban Infrastructure Spreading Characteristics in The Border Area of Semarang City ( Case Study: Sendang Mulyo Settlements) Modeling of the operational pattern of the pump system in the polder design for flood and rob mitigation in East Semarang An Analysis of Rolling Damage Ship Motion Caused by the Wave Load on Bulk Carrier Vessels Back matter Front matter More recent articles
Most cited articles
ANALISIS RESIKO KONSENTRASI DEBU (TSP) DAN TIMBAL (Pb) DI PINGGIR JALAN TERHADAP KESEHATAN MANUSIA STUDI KASUS KOTA YOGYAKARTA RECOVERY GARAM LITHIUM DARI AIR ASIN (BRINE) DENGAN METODA PRESIPITASI Modifikasi Pati Sukun (Artocarpus Altilis) dengan Teknik Oksidasi Menggunakan Hidrogen Peroksida Tanpa Katalis Pengaruh Activity Support terhadap Kualitas Visual Koridor Jalan K.H. Agus Salim Semarang KELEMBAGAAN IMPLEMENTASI PROGRAM KREDIT MIKRO PERUMAHAN DI KOTA SEMARANG More cited articles
  1. Atkinson, K. B. (1996). Close range photogrammetry and machine vision. Caithness: Whittles Publ
  2. Prasetyo Y., Bashit N., Silaen B. (2018) Aplikasi Fotogrametri Rentang Dekat Dalam Pemodelan Tiga Dimensi Sebagai Sarana Konservasi Objek Kebudayaan (Studi Kasus : Patung Sapi Fakultas Peternakan Universitas Diponegoro). Yogyakarta: Prosiding Seminar Nasional Geografi II
  3. Quintero, M. S., Genechten, B. V., Bruyne, M. D., Ronald, P., Hankar, M., & Barnes, S., (2008). Theory and practice on Terrestrial Laser Scanning. Project (3DriskMapping)
  4. Soeta’at. (1994). Fotogrametri Analitik. Yogyakarta: Jurusan Teknik Geodesi. Fakultas Teknik Universitas Gadjah Mada.Yogyakarta
  5. TOPCON. (2013). Topcon GLS-2000 User Manual Book
  6. Wolf, P. R., Dewitt, B. A., dan Wilkinson, B. E. (2014), Elements of Photogrammetry with applications in GIS. 4th. Ed. New York: McGraw-Hill Education
  7. Wu, C. (2013), Towards Linear-Time Incremental Structure from Motion. Seattle : IEEE. 2013 International Conference on 3D Vision, 127–134

Last update:

No citation recorded.

Last update: 2024-11-15 15:04:45

No citation recorded.