Synthesis of Poly(N-vinyl-2-pyrrolidone-co-methyl methacrylate) by Maghnite-H+ a Non-toxic Catalyst

*Mohamed Benadda  -  Laboratoire de Chimie des Polymères, Département de Chimie, Faculté des Sciences, Université d'Oran Es-Sènia BP N° 1524 El M'Naouar, 31000 Oran,, Algeria
Mohamed Issam Ferrahi  -  Laboratoire de Chimie des Polymères, Département de Chimie, Faculté des Sciences, Université d'Oran Es-Sènia BP N° 1524 El M'Naouar, 31000 Oran,, Algeria
Mohamed Belbachir  -  Laboratoire de Chimie des Polymères, Département de Chimie, Faculté des Sciences, Université d'Oran Es-Sènia BP N° 1524 El M'Naouar, 31000 Oran,, Algeria
Received: 24 Nov 2013; Published: 28 Oct 2014.
Open Access
Citation Format:
Cover Image
Abstract

In the present work poly (N-vinyl-2-pyrrolidone-co-methyl methacrylate) copolymers were prepared successfully and cleanly by a one step process via cationic copolymerization of N-vinyl-2-pyrrolidone (NVP) with methyl methacrylate (MMA), in heterogeneous phase using “Maghnite-H+” (Mag-H+) as catalyst in bulk, Maghnite is a montmorillonite sheet silicate clay exchanged with protons to produce Maghnite-H+. Temperature is varied between 20 and 80 °C. The effects of reaction temperature, amount of Mag-H+ on the yield and the intrinsic viscosity (η) were investigated. A typical reaction product of poly (NVP-co- MMA) was analyzed by infra red spectroscopy (FTIR) and 1H-NMR, 13C-NMR spectroscopy as well as by viscosimetry. © 2014 BCREC UNDIP. All rights reserved

Received: 24th November 2013; Revised: 30th June 2014; Accepted: 8th July 2014

How to Cite: Benadda, M., Ferrahi, M.I., Belbachir, M. (2014). Synthesis of Poly(N-vinyl-2-pyrrolidone-co-methyl methacrylate) by Maghnite-H+ a Non-toxic Catalyst. Bulletin of Chemical Reaction Engineering & Catalysis, 9 (3): 201-206. (doi: 10.9767/bcrec.9.3.5743.201-206)

Permalink/DOI: http://dx.doi.org/10.9767/bcrec.9.3.5743.201-206

Article Metrics:

Article Info
Section: Original Research Articles
Language: EN
In 2014: BCREC Volume 9 Issue 3 Year 2014 (SCOPUS Indexed, December 2014)
Statistics: 1906 1456
Related articles
Electro-Catalysis System for Biodiesel Synthesis from Palm Oil over Dielectric-Barrier Discharge Plasma Reactor Electrochemical Processes for the Formation of Hydroxyapatite Powders Synthesis, Characterization and Catalytic Activity of Cu/Cu2O Nanoparticles Prepared in Aqueous Medium Synthesis of Faujasite from Fly Ash and its Applications for Hydrocracking of Petroleum Distillates Selective Synthesis of Benzaldehydes by Hypochlorite Oxidation of Benzyl Alcohols under Phase Transfer Catalysis
  1. Gjaerde, A. C. (1997). The new method of determining characteristics of elements for overvoltage protection of low-voltage system, IEEE Transaction on Dielectrics and Electrical Insulation, 4: 674-680
  2. Dissado, L. A., Mazzanti, G., Montanari, G. C. (1997). Influence of electro-mechanical stress on electrical properties of dielectric polymers, IEEE Transaction on Dielectrics and Electrical Insulation, 4: 496-505
  3. Gressus, C. L., Blaise, G. (1992). Thermal step method for space charge measurements under applied dc field, IEEE Transactions on Electrical Insulation, 27: 472-481
  4. Ajithkumar, M. P., Yashoda, M. P., Prasannakumar, S. (2012). Copolymerization of N-Vinyl pyrrolidone with methyl methacrylate by Ti(III)-DMG redox initiator. Turk. J. Chem., 36: 397-409
  5. Jin, S., Liu, M., Chen, S.,Gao, C. (2008). Synthesis, characterization and the rapid response property of the temperature responsive PVP-g-PNIPAM hydrogel, Eur. Polym. J., 44: 2162-2170
  6. Pakuro, N., Yakimansky, A., Chibirova, F.,Arest-Yakubovich, A.(2009).Thermo and pH-sensitivity of aqueous poly (N-vinylpyrrolidone) solutions in the presence of organic acids. Polymer, 50: 148-153
  7. Jin, S., Liu, M., Zhang, F., Chen, S., Niu, A. (2006). Synthesis and characterization of pH-sensitivity semi-IPN hydrogel based on hydrogen bond between poly(N-vinyl pyrrolidone) and poly (acrylic acid), Polymer, 47: 1526-1532
  8. El-Hag Ali, A., Shawky, HA., Abd El Rehim, HA., Hegazy, E. A. (2003). Hydrogels of poly- vinylpyrrolidone (PVP) and poly (acrylic acid) (PAA) synthesized by photoinduced crosslink- ing of homopolymers, Eur. Polym. J., 39: 2337–2344
  9. Jansen, J., Melchels, F.P.W., Grijpma, D.W., Feijen, J. (2009). Fumaric acid monoethyl ester-functionalized poly(D,L-lactide)/N-vinyl-2-pyrrolidone resins for the preparation of tissue engineering scaffolds by stereolithography, Biomacromolecules, 10: 214-20
  10. Bichuch, N.A., Ganyukhina, T.G., Semchikov, Y.D.(2003). Synthesis of poly(vinylacetate–methyl methacrylate) copolymer microspheres using suspension polymerization, J. Appl. Chem, 76: 607-609
  11. Jalili, K., Abbasi, F., Nasiri, M.,Ghasemi, M., Haddadi, E.(2009). Preparation and Characterization of Expandable St/MMA Copolymers Produced by Suspension Polymerization, J. Cellular Plastics, 45: 197-224
  12. Horak, D., Benes, M.J. (2000). Macroporouspoly(vinylpyrrolidone–co–ethylene dimethacrylate) beads by suspension polymerization, React. Func. Polym., 45: 189-195
  13. Belbachir, M., Bensaoula, A. (2006). Composition and method for catalysis using bentonites, US Patent, No7, 094-823 B2
  14. Yahiaoui, A., Belbachir, M., Hachemaoui, A. (2003). Cationic polymerization of 1,2-epoxypropane by an acid exchanged montmorillonite clay in the presence of ethylene glycol, International Journal of Molecular Sciences, 4: 572-585
  15. Harrane, A., Meghabar, R., Belbachir, M. (2002). A Protons Exchanged Montmorillonite Clay as an Efficient Catalyst for the Reaction of Isobutylene Polymerization, Int. J. Mol. Sci, 3: 790-800
  16. Harrane, A., Meghabar, R., Belbachir M. (2006). Kinetics of the ring opening polymerization of e-caprolactone catalyzed by proton exchanged montmorillonite clay, React. Funct. Polym, 66: 1696-1702
  17. Harrane, A., Naar, N., Belbachir, M. (2007). Ring opening polymerization of oxetane by the use of a montmorillonite clay as catalyst, Material Letters, 61: 3555-3558
  18. Ayat, M., Harrane, A., Belbachir, M. (2008). Maghnite-H+ a solid catalyst for the cationic Polymerization of α-methylstyrene, J. Appl. Polym. Sci., 109: 1476-1479
  19. Ferrahi, M.I., Belbachir, M.(2005).Synthesis of cyclic polyesters of poly (oxybutyleneoxymaleoyl), Journal of Polymer Research,12:167–171
  20. Ferrahi, M. I.,Belbachir M.(2004). Preparation of poly(oxybutyleneoxymaleoyl) catalyzed by a proton exchanged montmorillonite clay, Molecules, 9: 968-977
  21. Brown, D.R. (1994). Geol Carpathica Ser Clays, 45: 45
  22. Laszlo, P. (1987) Preparative Chemistry Using Supported Reagents, Academic Press: San Diego
  23. Namouchia, F., Smaoui, H., Fourati, N., Zerrouki, C., Guermazi, H., Bonnet, J.J. (2009). Investigation on electrical properties of ther- mally aged PMMA by combined use of FTIR and impedance spectroscopies, Journal of Al- loys and Compounds, 469: 197-202
  24. Brar, A.S., Kumar, R. (2002). Microstructure analysis of N-vinyl-2-pyrrolidone/vinyl acetate copolymers by NMR spectroscopy, Polymer. Int, 51: 519-529
  25. Kothandaraman, H., Sangeetha, D.(2001). Effect of the catalyst on the copolymers of styrene with methyl methacrylate by Ziegler-Natta polymerization, European Polymer Journal, 37: 485-495
  26. Brar, A.S., Kumar, R., Kaur, M. (2003). N-vinyl-2-pyrrolidone and methacrylonitrile copolymers: nuclear magnetic resonance characterization, Journal of Molecular Structure, 650: 85-92

Last update: 2021-03-02 17:31:33

No citation recorded.

Last update: 2021-03-02 17:31:34

No citation recorded.

Copyright Transfer Agreement

The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to Bulletin of Chemical Reaction Engineering & Catalysis journal and Department of Chemical Engineering Diponegoro University as publisher of the journal.

Copyright encompasses exclusive rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms and any other similar reproductions, as well as translations. The reproduction of any part of this journal, its storage in databases and its transmission by any form or media, such as: electronic, electrostatic and mechanical copies, photocopies, recordings, magnetic media, etc. , will be allowed only with a written permission from Bulletin of Chemical Reaction Engineering and Catalysis journal and Department of Chemical Engineering Diponegoro University.

Bulletin of Chemical Reaction Engineering & Catalysis journal and Department of Chemical Engineering Diponegoro University, the Editors and the Advisory International Editorial Board make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in the Bulletin of Chemical Reaction Engineering & Catalysis (BCREC) are sole and exclusive responsibility of their respective authors and advertisers.

The Copyright Transfer Agreement Form can be downloaded here: [Copyright Transfer Form BCREC 2016]
The copyright form should be signed originally and send to the Editorial Office in the form of original mail, scanned document or fax :

Assoc. Prof. Dr. I. Istadi (Editor-in-Chief)
Editorial Office of Bulletin of Chemical Reaction Engineering & Catalysis
Department of Chemical Engineering, Diponegoro University
Jl. Prof. Soedarto, Kampus Undip Tembalang, Semarang, Central Java, Indonesia 50275
Telp.: +62-24-7460058, Fax.: +62-24-76480675
E-mail: bcrec@live.undip.ac.id