DOI: https://doi.org/10.9767/bcrec.10.2.7381.125-142

The Applications of Mixed Metal Oxides to Capture the CO2 and Convert to Syn-Gas

Sajan Babhare  -  Chemical Engineering and Process Development Division, National Chemical Laboratory, Pune- 411 008,, India
Reshma Raskar  -  Chemical Engineering and Process Development Division, National Chemical Laboratory, Pune- 411 008,, India
Komal Bobade  -  Chemical Engineering and Process Development Division, National Chemical Laboratory, Pune- 411 008,, India
*A. G. Gaikwad  -  Chemical Engineering and Process Development Division, National Chemical Laboratory, Pune- 411 008,, India

Citation Format:
Cover Image
Abstract
The applications of different mixed metal oxides were explored for the capture of CO2 and convert of CO2 to syn-gas. The several samples of the mixed metal oxides were prepared by the sol-gel, solid-solid fusion, precipitation, molten salt and template methods in order to investigate the performance of mixed mtal oxides to the CO2 applications. These samples were calcined for the 3 h in air at 900 oC. The mixed metal oxides samples were characterized by acidity/basicity, surface area, XRD pattern, SEM images and to capture CO2. The basicity and surface area of the samples of mixed metal oxides were found to be in the range from 0.7 to 15.7 mmol.g-1 and 2.24 to 138.76 m2.g-1, respectively. The ob-tained results of prepared mixed metal oxides by different method were compared for the purpose of searching the efficient materials. The temperature profiles of the captured CO2 by the samples of mixed metal oxides were obtained in the range 100 to 800 oC. The captured CO2 was found to be in the range from 7.36 to 26.93 wt.%. The conversions of CO2 by methane were explored to syn-gas over the mixed metal oxides including the calcium iron lanthanum mixed metal oxides and (5 wt.%) Pd/Al2O3 at 700 oC with the gas hourly space velocities (GHSV) 6000 ml.h-1.g-1 of methane, 6000 ml.h-1.g-1 of CO2 and 24000 ml.h-1.g-1 of helium.  © 2015 BCREC UNDIP. All rights reserved

Received: 23rd September 2014; Revised: 4th February 2015; Accepted: 5th February 2015

How to Cite: Babhare, S., Raskar, R., Bobade, K., Gaikwad, A. (2015). The Applications of Mixed Metal Oxides to Capture the CO2 and Convert to Syn-Gas. Bulletin of Chemical Reaction Engineering & Catalysis, 10 (2): 125-142. (doi:10.9767/bcrec.10.2.7381.125-142)

Permalink/DOI: http://dx.doi.org/10.9767/bcrec.10.2.7381.125-142

Fulltext View|Download
Keywords: Sol-gel method; capture of CO2; mixed metal oxides; solid-solid fusion method; syn-gas

Article Metrics:

Article Info
Section: Original Research Articles
Language : EN
Recent articles
Application of La-ZSM-5 Coated Silicon Carbide Foam Catalyst for Toluene Methylation with Methanol Modeling and Simulation of CO2 Absorption into Promoted Aqueous Potassium Carbonate Solution in Industrial Scale Packed Column Vulcanization Kinetics and Mechanical Properties of Ethylene Propylene Diene Monomer Thermal Insulation Preface Front-matter Back-matter More recent articles
  1. Yong, Z. Mata, V., Rodriguez, A.E. (2001). Adsorption of carbon dioxide onto hydrotalcite-like compounds (HTlcs) at high temperatures. Industrial & Engineering Chemistry Research, 40: 204-209
  2. Hutson, N.D., Attwood, B.C. (2008). High temperature adsorption of CO2 on various hydrotalcite-like compounds. Adsorption, 14: 781-789
  3. Wyers, G.P., Cordfunke, E.H.P., Aouweltjes, W. (1989). The standard molar enthalpies of formation of the lithium zirconates. The Journal of Chemical Thermodynamics, 21: 1095-1100
  4. Avalos, R.T., Casa, M.J., Pfeiffer, H. (2009). Thermochemical capture of carbon dioxide on lithium aluminates (LiAlO2 and Li5AlO4): a new option for the CO2 absorption. Journal of Physical Chemistry A, 113: 6919-6923
  5. Gupta, H., Fan, L.S. (2002). Carbonation-calcination cycle using high reactivity calcium oxide for carbon dioxide separation from flue gas. Industrial & Engineering Chemistry Research, 41: 4035-4042
  6. Hung, X.H., Chang, J. (2007). Low-temperature synthesis of nanocrystalline β-dicalcium silicate with high specific surface area. Journal of Nanoparticle Researsch, 9: 1195-1200
  7. Kalinkin, A.M., Boldyrev, V.V., Politov, A.A., Kalinkina, E.V., Makaraov, V.N., Kalinnkov, V.T. (2003). Investigation into the mechanism of interaction of calcium and magnesium silicates with carbon dioxide in the course of mechanical activation. Glass and Physical Chemistry, 29: 410-414
  8. Kotyczkamoranska, M., Tomaszewicz, V., Labojko, G. (2012). Copmarision of different methods for the enhancing CO2 capture by CaO-based sorbents. Physicochemical Problems Miner Process, 48(1): 77-90
  9. Laetitia, V., Alexandre, G., Philippe, G. (2012). Improvements of calcium oxide based sorbents for multiple CO2 capture cycles. Powder Technology, 228: 319-323
  10. Liang, Y., Xie, Y., Ji, H., Huang, L., Zheng, X. (2010). Excellent stability of plasma-sprayed bioactive Ca3ZrSi2O9 ceramic coating on Ti-6Al-4V. Applied Surface Science, 256 (14): 4677-4681
  11. Matsushita, F., Aono, Y., Shibata, S., (2004). Calcium silicate structure and carbonation shrinkage of a tobermorite-based material. Cement and Concrete Research, 34: 1251-1257
  12. Minghua, W., Choong, G.L., Chong, K.R. (2008). CO2 sorption and desorption efficiency of Ca2SiO4. International Journal of Hydrogen Energy, 33: 6368-6372
  13. Nakagawa, K., Kato, M., Yoshikawa, S., Essaki, K., Uemoto, H. (2003). Second annual conference on carbon sequestration, May 5-8 Hilton Alexandria mark centre Alexandria, VA,
  14. Ramaswamy, Y., Wu, C.T., Van Hummel, A., Combes, V., Grau, G., Zreiqat, H. (2008). The responses of osteoblasts, osteoclasts and endothelial cells to zirconium modified calcium-silicate-based ceramic. Biomaterials, 29(33): 4392-4402
  15. Wang, M., Lee, C.G. (2009). Absorption of CO2 on CaSiO3 at high temperatures. Energy Conversion and Manangement, 50: 636-638
  16. Laosiripojana, N., Assabumrungrat,, S., (2005). Catalytic dry reforming of methane over high surface area ceria. Applied Catalysis B, Environmental, 60(1-2): 107-116
  17. Lima, S.M., Assaf, J.M., Peña, M.A., Fierro, J.L.G. (2006). Structural features of La1−xCexNiO3 mixed oxides and performance for the dry reforming of methane. Applied Catalysis A, General, 311(1): 94-104
  18. Maestri, M., Vlachos, D.G., Beretta, A., Groppi, G., Tronconi, E. (2009). Steam and dry reforming of methane on Rh: Microkinetic analysis and hierarchy of kinetic models. Journal of Catalysis, 259(2): 211-222
  19. Tsyganok,, A., Tsunoda, T., Hamakawa, S., Suzuki, K., Takehira, K., Hayakawa, T. (2003). Dry reforming of methane over catalysts derived from nickel-containing Mg-Al layered double hydroxides. Journal of Catalysis, 213 (2): 191-203
  20. Alonso, D. S., Juan, J.J., Gómez, M.J., Martínez, M.C. (2009). Ni, Co and bimetallic Ni–Co catalysts for the dry reforming of methane. Applied Catalysis A, General, 371 (1-2): 54-59
  21. Aparicio, P.F., Ramos, I.R., Anderson, J.A., Ruiz, A.G. (2000). Mechanistic aspects of the dry reforming of methane over ruthenium catalysts. Applied Catalysis A, General, 202 (2): 183-196
  22. Brungs, A.J., York, A.P.E., Claridge, J.B., Alvarez, C.M., Green, M.L.H. (2000). Dry reforming of methane to synthesis gas over supported molybdenum carbide catalysts. Catalysis Letters, 70: 117-122
  23. Djinovi, P., Crnivec, I.G.O., Batista, J., Levec, J., Pintar, A. (2011). Catalytic syngas production from greenhouse gasses: Performance comparison of Ru-Al2O3 and Rh-CeO2 catalysts. Chemical Engineering and Processing: Process Intensification, 50: 1054-1062
  24. Edwards, J.H., Maitra, A.M. (1995). The chemistry of methane reforming with carbon dioxide and its current and potential applications. Fuel Process Technology, 42: 269-289
  25. Gallego, G.S., Dupeyrat, C.B., Barrault, J., Florez, E., Mondragón, F. 2008). Dry reforming of methane over LaNi1−yByO3±δ (B = Mg, Co) perovskites used as catalyst precursor. Applied Catalysis A. General, 334(1-2): 251-259
  26. Guo, J., Lou, H., Zhao, H, Chai, D., Zheng, X. (2004). Dry reforming of methane over nickel catalysts supported on magnesium aluminate spinels. Applied Catalysis A, General, 273(1-2): 75-82
  27. Balmer, M.L., Bunker, B.C., Wang, L.Q., Peden, C.H.F., Su, Y. (1997). Solid-state 29Si MAS NMR study of titanosilicates. Journal of Physical Chemistry B. 101: 9170-9179
  28. Mägi, M., Lippman, E., Samoson, A. (1984). Solid- state high-resolution silicon-29 chemical shifts in silicates. Journal of Physical Chemistry. 88: 1518-1522
  29. Casanovas, J., Illas, F., Pacchioni, G. (2000). Ab inito calculations of 29Si solid state NMR chemical shifts of silane and silanol group in silica. Chemical Physics Letters. 326: 523-529
  30. Schneider, J., Mastelaro, V.R., Panepucci, H., Zanotto, E.D. (2000). 29Si MAS-NMR Studies of Qn structural units in metasilicate glasses and their nucleating ability. Journal of Non-Crystalline solids. 273: 8-18

Last update:

No citation recorded.

Last update:

No citation recorded.