skip to main content

Penerapan SCADA dan IoT Menggunakan PLC Sebagai Kontrol Motor AC untuk Pembelajaran Praktikum SMK

*Dadan Nurdin Bagenda orcid scopus  -  Elektronika, Politeknik Negeri Bandung, Indonesia
Noor Cholis Basjaruddin  -  Elektronika, Politeknik Negeri Bandung

Citation Format:
Abstract
The problem at the current Vocational High School that often arises is the unavailability of the Supervisory Control And Data Acquisition (SCADA) practicum module, to control AC Motor which can also be monitored online (IoT support) to support industry 4.0. The following solutions: (1). The developed module must be remotely controlled with industry standards; (2). The method used during the practicum is the problem-based-learning (PBL) method. To implement the above problem, a PLC that support SCADA and IoT (MQTT) was chosen. To introduce SCADA and IoT to students, we learned how to operating a simple industry-standard SCADA software and IoT (Ubidots). Post-training from the results of the questionnaire for vocational students, it was seen an average increase in knowledge of 56% compared to before training, a min 42% increase in PBL understanding, and a max 64% increase in knowledge of "Wonderware Intouch" as one of the Industry Standard SCADA

Note: This article has supplementary file(s).

Fulltext View|Download |  Research Results
Penerapan SCADA dan IoT Menggunakan PLC Sebagai Kontrol Motor AC untuk Pembelajaran Praktikum SMK
Subject Programmable Logic Control, learning module, MQTT, Internet of Things
Type Research Results
  Download (1MB)    Indexing metadata
Keywords: Programmable Logic Control, learning module, MQTT, Internet of Things

Article Metrics:

  1. Tim Depdiknas, 2007, "Materi Sosialisasi Kurikulum Tingkat Satuan Pendidikan (KTSP) SMK," Departement Pendidikan Nasional, Jakarta
  2. W. Hung, D. H. Jonassen and R. Liu, 2008, "Problem-Based Learning," in Handbook of Research on Educational Communications and Technology, Routledge, p. 924.
  3. N. C. Basjaruddin, 2015 “Pembelajaran Mekatronika Berbasis Proyek”, Yogyakarta: Deepublish.
  4. N. C. Basjaruddin and E. Rakhman, 2011, "Penerapan Metoda Project Based Learning (PBL) Pada Praktikum Mekatronika," in Industrial Research Workshop and National Seminar 2011, Bandung
  5. E. Rakhman, 2010, “Buku Ajar Sistem Otomasi Industri”, Bandung: Politeknik Negeri Bandung,

Last update:

No citation recorded.

Last update: 2024-11-12 23:52:32

No citation recorded.