skip to main content

PERANCANGAN PERANGKAT LUNAK UNTUK PENGUKURAN WAKTU KERJA MENGGUNAKAN TEKNOLOGI SPEECH RECOGNITION

*Arief Rahman  -  Laboratorium Ergonomi dan Perancangan Sistem Kerja, Indonesia
Galih Febrianto  -  Laboratorium Ergonomi dan Perancangan Sistem Kerja, Indonesia
Adithya Sudiarno  -  Laboratorium Ergonomi dan Perancangan Sistem Kerja, Indonesia

Citation Format:
Abstract

Pengukuran waktu kerja merupakan bagian penting dalam proses standarisasi kerja. Secara
umum pengukuran kerja dapat dibagi menjadi dua yaitu pengukuran secara langsung dan tidak langsung.
Pada pengukuran kerja secara tidak langsung, terdapat beberapa metode pengukuran salah satunya adalah
Methods Time Measurements (MTM)-1. Untuk pengukuran secara manual, perhitungan dengan MTM-1
dilakukan dengan memilih daftar operasi yang sesuai dengan operasi kerja amatan. Penggunaan table
MTM dapat dilakukan oleh pengguna yang telah memahami gerakan kerja dan MTM serta memerlukan
durasi waktu tertentu dalam proses penetapan waktu standar yang harus tepat dan akurat menggunakan
table MTM.
Pengembangan perangkat lunak untuk mempermudah dan meningkatkan keakuratan penggunaan metode
MTM merupakan kontribusi utama dalam penelitian ini. Aplikasi perangkat lunak (SperofiM-1) ini
dirancang untuk seorang observer dalam pengukuran kerja secara tidak langsung. Teknologi speech
recognition dikembangkan dalam aplikasi ini untuk meningkatkan kecepatan dan keakuratan pemilihan
operasi kerja yang bersesuaian pada table MTM. Suara observer dibaca sebagai sebuah informasi dan
dikonversi dalam spektrum suara yang dianalisa dan dibandingkan dengan template suara dan data waktu
sesuai tabel MTM-1 pada database sistem. Dari hasil pengujian antara metode manual, metode click, dan
SperofiM-1 diperoleh bahwa SperofiM-1 mampu memberikan performansi waktu terbaik dalam proses
pengukuran kerja dengan tabel MTM-1 sebesar 74,14%.
Kata Kunci: Pengukuran Waktu Kerja, Methods Time Measurement, Speech Recognition

 


Measurement of working time is an important part in the process of standardization work. In
general, the measurement of work can be divided into two, namely measurement directly and indirectly.
In measuring the indirect employment, there are several methods of measuring one of them is Methods
Time Measurements (MTM) -1. For manual measurements, calculations with the MTM-1 is done by
selecting a list of operations in accordance with the observation of work operations. Use of MTM table
can be performed by users who have understood the work and the MTM movement and require a certain
duration of time in the process of setting standards that must be precise and accurate use MTM table.
Development of software to simplify and improve the accuracy of the MTM method is the use of the main
contributions in this research. Application software (SperofiM-1) is designed for an observer in the
measurement of indirect employment. Speech recognition technology developed in this application to
increase the speed and accuracy of the selection operation corresponding work on MTM table. Sound
observer read as an information and convert the sound spectrum was analyzed and compared with voice
and data templates appropriate time MTM-1 tables in the database system. From the test results between
the manual method, click the method, and SperofiM-1 obtained that SperofiM-1 is able to give the best
time in the performance measurement process of working with MTM-1 tables for 74.14%.
Keywords: Measuring Time Work, Methods Time Measurement, speech recognition

Fulltext View|Download

Article Metrics:

Last update:

No citation recorded.

Last update: 2024-03-29 08:36:58

No citation recorded.