DOI: https://doi.org/10.14710/jati.17.1.40-51

IMPLEMENTATION OF THE DMAIC APPROACH FOR QUALITY IMPROVEMENT AT THE ELASTIC TAPE INDUSTRY

*Hibarkah Kurnia orcid  -  Universitas Mercu Buana, Indonesia
Choesnul Jaqin orcid  -  Universitas Mercu Buana, Indonesia
Hasiholan Manurung  -  Universitas Mercu Buana, Indonesia

Citation Format:
Abstract

The scope of this research is in one of the textile industries with elastic tape produced on the weaving machine, which has decreased production due to production defects that do not meet the target. This research aims to determine the leading causes of dominant defects, increase the sigma level with Six Sigma methods, and propose improvements to be included in the Key Performance Indicators (KPI) method. The results of this study that the dominant factor causing the defect is the curved elastic tape defect, which consists of the machine factor, and the method. Factors driving the machine include the hook like a side thread lock that is often bent and the difference in the thickness of the tape between the left, middle and right. The causative factor of this method is checking the thickness of the elastic band only in the center position. The results of corrective actions impact increasing the sigma level by 10% from 3.3339 to 3.6832. In contrast, repair defects can reduce defects before repair by 18.92% and after repair by 9.23%. It is proposed to be included in the KPI so that the weaving department can control and be enthusiastic about continuous improvement.


Fulltext View|Download
Keywords: DMAIC; Elastic Tape; Six Sigma; Textile; Quality Improvement

Article Metrics:

Article Info
Section: Case Studies
Language : EN
Recent articles
PERANCANGAN STRATEGI PENINGKATAN KETERLIBATAN PELANGGAN DI MEDIA SOSIAL PENGEMBANGAN MODEL PERSETUJUAN KREDIT NASABAH BANK DENGAN ALGORITMA KLASIFIKASI NAÏVE BAYES, DECISION TREE, DAN ARTIFICIAL NEURAL NETWORK PENENTUAN KEBIJAKAN PENGADAAN BAHAN PENDUKUNG PRODUKSI BERBASIS MULTI KRITERIA DAN ASPEK MANUSIA EVALUASI USER EXPERIENCE SSO UNDIP MENU SIAP BERDASARKAN PERSEPSI MAHASISWA TEKNIK INDUSTRI MENGGUNAKAN USER EXPERIENCE QUESTIONNAIRE (UEQ) SIMULASI LEAN DAN SIKLUS PDCA UNTUK KARTU IDENTITAS ANAK DI DISDUKCAPIL GARUT More recent articles
Most cited articles
MODEL PEMILIHAN BAHAN PEWARNA ALAM COKLAT BATIK TULIS SOLO DENGAN MENGGUNAKAN METODE ANALYTICAL HIERARCHY PROCESS (AHP) FAKTOR-FAKTOR PERILAKU PRO-LINGKUNGAN DALAM MENDUKUNG PELAKSANAAN IMPLEMENTASI CAMPUS SUSTAINABILITY PENERAPAN METODE OVERALL EQUIPMENT EFFECTIVENESS (OEE) DAN FAULT TREE ANALYSIS (FTA) UNTUK MENGUKUR EFEKTIFITAS MESIN RENG PENGEMBANGAN TEKNOLOGI RAPID PROTOTYPING UNTUK PEMBUATAN PRODUK-PRODUK MULTI MATERIAL PENERAPAN FUZZY ANALYTIC HIERARCHY PROCESS DALAM METODE MULTI ATTRIBUTE FAILURE MODE ANALYSIS UNTUK MENGIDENTIFIKASI PENYEBAB KEGAGALAN POTENSIAL PADA PROSES PRODUKSI More cited articles
  1. Abbes, N., Ser, C., & Sci, M. (2018). Application of Six Sigma in Clothing SMEs : A case study Application of Six Sigma in Clothing SMEs : A case study. https://doi.org/10.1088/1757-899X/460/1/012009
  2. Adikorley, R. D., Rothenberg, L., & Guillory, A. (2017). Lean Six Sigma applications in the textile industry: a case study. International Journal of Lean Six Sigma, 8(2). https://doi.org/10.1108/ijlss-03-2016-0014
  3. Ahmed, N. G. S., Abohashima, H. S., & Aly, M. F. (2018). Defect reduction using Six Sigma methodology in-home appliance company: A case study. Proceedings of the International Conference on Industrial Engineering and Operations Management, 2018(SEP), 1349–1358
  4. Bakar, A., Suprianto, O., & Yuniati, Y. (2017). Usulan Peningkatan Produktivitas Berdasarkan Metode Mundel dan APC di PT Raffsya Media. Journal of Industrial Engineering Management. https://doi.org/10.33536/jiem.v2i2.147
  5. Carroll, C. T. (2013). Six Sigma for Powerful Improvement. In y Taylor & Francis Group, LLC (A Green Be). Taylor & Francis Group. https://doi.org/10.1201/b14806
  6. Fithri, P. (2019). Six Sigma Sebagai Alat Pengendalian Mutu pada Hasil Produksi Kain Mentah PT Unitex, Tbk. J@ti Undip : Jurnal Teknik Industri. https://doi.org/10.14710/jati.14.1.43-52
  7. Ginn, D. et al., & Varner, E. (2004). The Design for Six Sigma Memory JoggerTM. Goal/QPC
  8. Hamid, M., Hamid, M., Nasiri, M. M., & Ebrahimnia, M. (2018). Improvement of Operating Room Performance Using a Multi-Objective Mathematical Model and Data Envelopment Analysis: A Case Study. International Journal of Industrial Engineering & Production Research, 29(3), 359–376. https://doi.org/10.22068/ijiepr.29
  9. Herrera, A. R. C., Aguirre, J. del P. U., & Leyva, L. L. L. (2019). Application of six sigma in improving the quality of recyclable polymer in collection centers. Proceedings of the International Conference on Industrial Engineering and Operations Management, July 1053–1062
  10. Khodami, S. H., Kamranrad, R., & Mardan, E. (2021). RESEARCH PAPER A New Approach to Determine the Critical Factors of the Product Quality Optimization : A Structural Equation Modeling ( A Case Study : Hydrocarbon Solvents Based Paints Quality ). 32(2), 1–14. https://doi.org/10.22068/ijiepr.32.2.1
  11. Kurnia, H., & Hardi Purba, H. (2021). A Systematic Literature Review of Lean Six Sigma in Various Industries. Journal of Engineering and Management in Industrial System, 9(2), 19–30. https://doi.org/10.21776/ub.jemis.2021.009.002.3
  12. Kurnia, H., Jaqin, C., Purba, H. H., & Setiawan, I. (2021). Implementation of Six Sigma in the DMAIC Approach for Quality Improvement in the Knitting Socks Industry. Tekstilvemuhendis, 28(124), 269–278. https://doi.org/10.7216/1300759920212812403
  13. Kurnia, H., Setiawan, & Hamsal, M. (2021). Implementation of statistical process control for quality control cycle in the various industry in Indonesia : Literature review. Operations Excellence: Journal of Applied Industrial Engineering, 13(2), 194–206. https://doi.org/10.22441/oe.2021.v13.i2.018
  14. Malek, J., & Desai, D. (2015). Reducing rejection/rework in pressure die casting process by application of dmaic methodology of six sigma. International Journal for Quality Research, 9(4), 577–604
  15. Mukhlis, D., Fathurohman, H., & Purba, H. H. (2021). Value Stream Mapping and Six Sigma Methods to Improve Service Quality at Automotive Service. Operational Research in Engineering Sciences: Theory and Applications, 4(2), 36–54. https://doi.org/https://doi.org/10.31181/oresta20402036f
  16. Nurprihatin, F., Yulita, N. E., & Caesaron, D. (2017). Usulan Pengurangan Pemborosan pada Proses Penjahitan Menggunakan Metode Lean Six Sigma. Prosiding Seminar Nasional Akuntansi Dan Bisnis
  17. Patel, M. T. (2017). Six Sigma in Service Organization – A Critical Review. Proceedings of International Conference on Emerging Trends in Mechanical Engineering, 2017(February), 1–14
  18. Praharsi, Y., Jami’in, M. A., Suhardjito, G., & Wee, H. M. (2020). Six sigma implementation and analysis-An empirical study of a traditional boat
  19. building industry in Indonesia. Proceedings of the International Conference on Industrial Engineering and Operations Management, 0(March), 3092–3100
  20. Ravichandran, J. (2016). Six Sigma-based X-BAR control chart for continuous quality improvement. International Journal for Quality Research, 10(2), 257–266. https://doi.org/10.18421/IJQR10.02-02
  21. Saryanto, Purba, H. H., Trimarjoko, A., & Fatahillah, F. (2020). Quality improvement of remanufacturing lift arm using six sigma methods in the heavy-duty industry in Indonesia: A case study. Operational Research in Engineering Sciences: Theory and Applications, 3(2), 24–38. https://doi.org/10.31181/oresta2003024s
  22. Saxena, M. M., & Srinivas Rao, K. V. N. (2019). Quality management, total quality management, and six sigma. In Intechopen (Vol. 8, Issue 12)
  23. Setiawan, I., & Setiawan, S. (2020). Defect reduction of roof panel part in the export delivery process using the DMAIC method: a case study. Jurnal Sistem Dan Manajemen Industri, 4(2), 108–116. https://doi.org/10.30656/jsmi.v4i2.2775
  24. Setyaningrum, R., Miftakhul Ulum, & Tita Talitha. (2020). Redesign of Cassava Cutting Tools Using Rational Methods to Increase Productivity. Jurnal Sistem Teknik Industri, 22(1), 52–62. https://doi.org/10.32734/jsti.v22i1.3255
  25. Shafira, Y. P., & Mansur, A. (2018a). Production quality improvement analysis of grey cambric using Six Sigma Method. MATEC Web of Conferences, 154, 0–3. https://doi.org/10.1051/matecconf/201815401090
  26. Shafira, Y. P., & Mansur, A. (2018b). Production quality improvement analysis of grey cambric using Six Sigma Method. MATEC Web of Conferences, 154(3), 1–14
  27. Sihombing, M. I. S., & Sumartini, S. (2017). Pengaruh Pengendalian Kualitas Bahan Baku dan Pengendalian Kualitas Proses Produksi terhadap Kuantitas Produk Cacat dan Dampaknya pada Biaya Kualitas (Cost of Quality). Jurnal Ilmu Manajemen Dan Bisnis. https://doi.org/10.17509/jimb.v8i2.12665
  28. Summers, D. C. . (2016). Quality Sixth Edition (Vol. 7, Issue 9)
  29. Sundaramali, G., K, S. R., Anirudh, S., Mahadharsan, R., & S, S. K. (2021). Application of DMAIC to Reduce the Rejection Rate Starter Motor Shaft Assembly in the Automobile Industry: A Case Study. International Journal of Industrial Engineering & Production Research, 32(3), 1–18
  30. Syafwiratama, O., Hamsal, M., & Purba, H. H. (2017). Reducing the nonconforming products by using the six sigma method: A case study of a polyester short cut fiber manufacturing in Indonesia. Management Science Letters, 7(3), 153–162. https://doi.org/10.5267/j.msl.2016.12.001
  31. Wardana, W., Harsono, A., & Liansari, G. P. (2015). Implementation of Quality Improvements Using Six Sigma Methods To Reduce The Number Of Defects Of The Sajadah Product At Pt. Kreasindo Textile Hut. Jurnal Online Institut Teknologi Nasional, 3(1), 85–96
  32. Yame, A., & Ali, A. (2019). Optimization of Lean Methodologies in the Textile Industry Using Design of Experiments. World Academy of Science, Engineering and Technology, International Journal of Social, Behavioral, Educational, Economic, Business and Industrial Engineering, 10(9), 3208–3212
  33. Zaman, D. M., & Zerin, N. H. (2017). Applying DMAIC Methodology to Reduce Defects of Sewing Section in RMG: A Case Study. American Journal of Industrial and Business Management, 07(12), 1320–1329. https://doi.org/10.4236/ajibm.2017.712093

Last update:

  1. Enhancing Quality Control of Packaging Product: A Six Sigma and Data Mining Approach

    Resty Ayu Ramadhani, Rina Fitriana, Anik Nur Habyba, Yun-Chia Liang. Jurnal Optimasi Sistem Industri, 22 (2), 2023. doi: 10.25077/josi.v22.n2.p197-214.2023

  2. ANALISIS PEMILIHAN PEMASOK TANAH LIAT DALAM PERBAIKAN KUALITAS PADA UMKM KERAJINAN GERABAH

    Vincensio Hardono, Parama Kartika Dewa, Hibarkah Kurnia. J@ti Undip: Jurnal Teknik Industri, 18 (3), 2023. doi: 10.14710/jati.18.3.190-201

  3. Reduced painting defects in the 4-wheeled vehicle industry on product type H-1 using the lean six sigma-DMAIC approach

    Iskandar Zulkarnaen, Hibarkah Kurnia, Bungaran Saing, Apriyani Apriyani, Arif Nuryono. Jurnal Sistem dan Manajemen Industri, 7 (2), 2023. doi: 10.30656/jsmi.v7i2.7512

  4. Implementation of six sigma approach for increasing quality formal men’s jackets in the garment industry

    Didin Sjarifudin, Hibarkah Kurnia, Humiras Hardi Purba, Choesnul Jaqin. Jurnal Sistem dan Manajemen Industri, 6 (1), 2022. doi: 10.30656/jsmi.v6i1.4359

Last update: 2024-11-22 01:12:33

No citation recorded.