DOI: https://doi.org/10.14710/jati.17.3.191-201

SUSTAINABLE MANUFACTURING DAN CIRCULAR ECONOMY: A SYSTEMATIC LITERATURE REVIEW

Sri Hartini  -  Universitas Diponegoro, Indonesia
*Diana Puspita Sari  -  Universitas Diponegoro, Indonesia
Fariez Alkaisi  -  Universitas Diponegoro, Indonesia
Teuku Reyhan Naufal  -  Universitas Diponegoro, Indonesia

Citation Format:
Abstract

Industri manufaktur perlu dalam mempertimbangkan keseimbangan terhadap aspek keberlanjutan yang meliputi aspek lingkungan, ekonomi, dan sosial. Sistem manufaktur yang berkelanjutan dan ekonomi melingkar sangat dibutuhkan dalam upaya menjawab tantangan global menjaga dan melindungi sumber daya. Studi komprehensif dibutuhkan untuk mengetahui dan memahami konsep sustainable manufacturing dan circular economy, sehingga penelitian ini bertujuan menganalisis literatur yang sudah ada sebelumnya pada topik sustainable manufacturing dan circular economy, dan melakukan pemetaan distribusi artikel. Metode yang digunakan dalam penelitian ini adalah Systematic Literature Review (SLR) yang dilakukan dengan mengikuti prosedur dan protokol yang memungkinkan proses literature review menghindari bias dan subjektivitas, dilanjutkan dengan meta-analysis untuk melihat distribusi dan keterkaitan statistik pada artikel yang telah dipublikasikan. Penelitian ini dibantu oleh software VOS viewer dan mesin pencari Emerald Insight dan ScienceDirect untuk pengelompokan data. Dari hasil pencarian, total didapatkan 1651 artikel yang berkaitan pada tahun 2015-2020 dan dilakukan sortir untuk mencari artikel yang relevan. Hasil analisis menunjukkan bahwa studi mengenai sustainable manufacturing dan circular economy terus mengalami peningkatan setiap tahunnya.  India menjadi negara dengan asal penulis dan tempat studi kasus terbanyak dan Journal Cleaner of Production merupakan jurnal yang mendominasi.

 

Abstract

[Title: Sustainable Manufacturing and Circular Economy : A Systematic Literature Review] The manufacturing industry needs to consider the balance of sustainability aspects which include environmental, economic, and social aspects. A sustainable manufacturing system and a circular economy are urgently needed to respond to the global challenge of conserving and protecting resources. A comprehensive study is needed to know and understand the concepts of sustainable manufacturing and circular economy, so this study aims to analyze the existing literature on the topic of sustainable manufacturing and circular economy and to map the distribution of articles. The method used in this study is a Systematic Literature Review (SLR) which is carried out by following procedures and protocols that allow the literature review process to avoid bias and subjectivity, followed by a meta-analysis to see the distribution and statistical relevance of published articles. This research was assisted by VOS viewer software and search engine Emerald Insight and ScienceDirecte for data grouping. From the search results, a total of 1651 related articles were obtained in 2015 – 2020 and sorted to find relevant articles. The results of the analysis show that studies on sustainable manufacturing and circular economy continue to increase every year. India is the country with the most authors and case studies, and the Journal Cleaner of Production is the dominating journal.

Keywords: systematic literature review; meta review; sustainable manufacturing; circular economy.


Fulltext View|Download
Keywords: systematic literature review; kajian meta; manufaktur berkelanjutan; ekonomi melingkar

Article Metrics:

Article Info
Section: Research Articles
Language : ID
Recent articles
ANALISIS LINGKUNGAN KERJA PENGRAJIN BATIK TULIS PADA PEKERJA TETAP DAN PEKERJA BORONG LEPAS DI DESA WISATA JARUM MENGHILANGKAN KELUHAN PELANGGAN DENGAN MENGGUNAKAN TEKNIK POKA-YOKE SEDERHANA BERBIAYA MURAH LITERATURE REVIEW: HUMAN FACTORS AND ERGONOMICS (HFE) IN THE FOOD INDUSTRY More recent articles
Most cited articles
ANALISIS KEPUASAN PELANGGAN DENGAN IMPORTANCE PERFORMANCE ANALYSIS DI SBU LABORATORY CIBITUNG PT SUCOFINDO (PERSERO) KAJIAN PEMETAAN DAN OPTIMALISASI POTENSI PAJAK DALAM RANGKA MENINGKATKAN PENDAPATAN ASLI DAERAH (PAD) DI KABUPATEN JEMBER DESAIN PROSES PEMBENTUKAN SERAT BAMBU SEBAGAI BAHAN DASAR PRODUK INDUSTRI KREATIF BERBAHAN DASAR SERAT PADA UKM PERANCANGAN PEMENUHAN PERMINTAAN PASOKAN GULA RAFINASI DENGAN METODE WAGNER WHITIN PENGEMBANGAN TEKNOLOGI RAPID PROTOTYPING UNTUK PEMBUATAN PRODUK-PRODUK MULTI MATERIAL More cited articles
  1. Aboelmaged, M., (2018). The drivers of sustainable manufacturing practices in Egyptian SMEs and their impact in competitive capabilities: A PLS-SEM model. Journal of Cleaner Production, 175, 207-221
  2. Agyemang, M., Kusi-Sarpong, S., Khan, S. A., Mani, V., Rehman, S. T., & Kusi-Sarpong, H. (2019). Drivers and barriers to circular economy implementation an explorative study in Pakistan’s automobile industry. Management Decision, 57(4), 971-994
  3. Ang, K. L., Saw, E. T., He, W., Dong, X., & Ramakrishna, S. (2021). Sustainability framework for pharmaceutical manufacturing (PM): A review of research landscape and implementation barriers for circular economy transition. Journal of Cleaner Production, 280, 124264
  4. Acerbi, F., & Taish, M. (2020). A literature review on circular economy adoption in the manufacturing sector. Journal of Cleaner Production, 273
  5. Bag, S., & Pretorius, J.H.C. (2020). Relationships between industry 4.0, sustainable manufacturing, and circular economy: proposal of a research framework. International Journal of Organizational Analysis, 30(4), 864-898
  6. Bhanot, N., Rao, V., & Deshmukh. (2015). Enablers and barriers of sustainable manufacturing: Results from a survey of researchers and industry professionals. Procedia CIRP, 29, 562-567
  7. Bhanot, N., Rao, V., & Deshmukh. (2017). An integrated approach for analyzing the enablers and barriers of sustainable manufacturing. Journal of Cleaner Production, 142(4), 4412-4439
  8. Blunck, E., & Werthmann, H. (2017). Industry 4.0– an opportunity to realize sustainable manufacturing and its potential for a circular economy. Dubrovnik International Economic Meeting, 3(1), 644-666
  9. Bradford, N. J., Rider, G. N., Catalpa, J. M., Morrow, Q. J., Berg, D. R., Spencer, K. G., & McGuire, J. K. (2019). Creating gender: A thematic analysis of genderqueer narratives. International Journal of Transgenderism, 20(2-3), 155-168
  10. Bulkeley, H., & Betsill, M., (2005). Rethinking sustainable cities: multilevel governance and the’urban’politics of climate change. Environmental Politics, 14(1), 42-63
  11. Castleberry, A., & Nolen, A. (2018). Thematic analysis of qualitative research data: Is it as easy as it sounds? Currents in pharmacy teaching and learning, 10(6), 807-815
  12. Dubey, R., & Bag, S (2013). Exploring the dimensions of sustainable practices: an empirical study on Indian manufacturing firms. International Journal of Operations and Quantitative Management, 19(2), 123-146
  13. Elia, V., Gnoni, M.G., & Tornese, F. (2020). Evaluating the adoption of circular economy practices in industrial supply chains: An empirical analysis. Journal of Cleaner Production, 273, 122966
  14. Gautam, A., Shankar, R., & Vrat, P. (2022). Managing end-of-life solar photovoltaic e-waste in India: A circular economy approach. Journal of Business Research, 142, 287-300
  15. Gusmerotti, N.M., Testa, F., Corsini, F., Pretner, G., & Iraldo, F. (2019). Drivers and approaches to the circular economy in manufacturing firms. Journal of Cleaner Production, 230, 314-327
  16. Jaeger, B., & Upadhyay, A. (2020). Understanding barriers to circular economy: cases from the manufacturing industry. Journal of Enterprise Information Management, 33(4), 729-745
  17. Kumar, V., Sezersan, I., Garya-Reyes, J.A., Gonzales, E.D.R.S., & Al-Shboul, M.A. (2019). Circular economy in the manufacturing sector: benefits, opportunities and barriers. Management Decisions. 57(4), 1067-1086
  18. Kusumowardani, N., Tjahjono, B., & Priadi, C. R. (2021). Circular economy adoption in the upstream agri-food supply chain: understanding the implications of the two theoretical lenses. In 11th Annual International Conference on Industrial Engineering and Operations Management, 5051-5060
  19. Malek, J., & Desai, T.N. (2019). Interpretive structural modelling-based analysis of sustainable manufacturing enablers. Journal of Cleaner Production. 238, 117996
  20. Malek, J., & Desai, T.N. (2019). Prioritization of sustain-able manufacturing barriers using Best Worst me-thod. Journal of Cleaner Production, 226, 589-600
  21. Malek, J., & Desai, T.N. (2020). A systematic literature review to map literature focus of sustainable manufacturing. Journal of Cleaner Production, 256, 120345
  22. Moktadir, A., Rahman, T., Rahman, H., Ali, S. M., & Paul, S. K. (2018). Drivers to sustainable manufacturing practices and circular economy: a perspective of leather industries in Bangladesh. Journal of Cleaner Production, 174(1), 1366-1380
  23. Munaro, M. R., Tavares, S. F., & Bragança, L. (2020). Towards circular and more sustainable buildings: A systematic literature review on the circular economy in the built environment. Journal of Cleaner Production, 260, 121134
  24. Prabhu, V. S., Shrivastava, S., & Mukhopadhyay, K. (2022). Life cycle assessment of solar photovoltaic in India: a circular economy approach. Circular Economy and Sustainability, 2(2), 507-534
  25. Raj, A., Dwivedi, G., Sharma, A., Jabbour, A.B.L.S., & Rajak, S. (2020). Barriers to the adoption of Industry 4.0 technologies in the manufacturing sector: An inter-country comparative perspective. International Journal of Production Economics, 224, 107546
  26. Rashid, S.H., Sakundarini, N., & Ariffin, R. (2017). Drivers for the adoption of sustainable manufacturing practices: A Malaysia perspective. International Journal of Precision Engineering and Manufacturing, 18(11), 1619-1631
  27. Rashid, S. H., Sakundarini, N., Ghazilla, R. A. R., & Thurasamy, R. (2017). The impact of sustainable manufacturing practices on sustainability performance: Empirical evidence from Malaysia. International Journal of Operations & Production Management
  28. Rashidi, K., Noorizadeh, A., Kannan, D., & Cullinane, K. (2020). Applying the triple bottom line in sustain-able supplier selection: A meta-review of the state-of-the-art. Journal of Cleaner Production, 269, 122001
  29. Roser, M., Ritchie, H., & Ospina, E.O. (2019). https://ourworldindata.org/world- population-growth
  30. Rizal, R. (2018). Manufaktur Berkelanjutan (Sustainable Manufacturing); Manufaktur Hijau (Green Manufacturing), Penerbit LPPM UPN Veteran Jakarta
  31. Staples, M., & Niazi, M. (2017) Experiences using systematic review guidelines. Journal of Systems and Software, 80, 1425- 1437
  32. Sirilertsuwan, P., Hjelmgren, D., & Ekwall, D. (2019). Exploring current enablers and barriers for susta-inable proximity manufacturing. Journal of Fashion Marketing and Management, 23(4), 551-571
  33. Sohal, A., Nand, A. A., Goyal, P., & Bhattacharya, A. (2022). Developing a circular economy: An exami-nation of SME’s role in India. Journal of Business Research, 142, 435-447
  34. Tierney, S., & Fox, J. R. (2010). Living with the anorexic voice: A thematic analysis. Psychology and Psycho-therapy: Theory, Research and Practice, 83(3), 243-254
  35. Vinodh, B.R., & Asokan (2017). State of art perspectives of lean and sustainable manufacturing. International Journal of Lean Six Sigma, 10(1), 234-256
  36. World Economic and Social Survey. (2013). Sustainable Development Challenges. Retrieved from United Nations, https://sustainabledevelopment.un.org/content/documents/2843WESS2013.pdf

Last update:

No citation recorded.

Last update: 2024-12-24 00:12:42

No citation recorded.