PEMBUATAN ALAT BANTU SIMULASI DALAM RANGKA PERANCANGAN RECONFIGURABLE MANUFACTURING SYSTEM DI INDUSTRI MANUFAKTUR

*Inaki Maulida Hakim -  Industrial Engineering Departement Diponegoro University Jl. Prof. Sudarto, SH Tembalang Semarang 50239 Telp. 0247460052, Indonesia
Ilham Winoto -  Industrial Engineering Departement Diponegoro University Jl. Prof. Sudarto, SH Tembalang Semarang 50239 Telp. 0247460052, Indonesia
Published: 3 Sep 2013.
Open Access
Citation Format:
Article Info
Section: Research Articles
Language: EN
Full Text:
Statistics: 1846 504
Abstract

Reconfigurable Manufacturing Systems (RMS) adalah sistem manufaktur yang mempunyai kemampuan mengkonfigurasi ulang hardware, software dan pusat kontrol pada level fungsional dan organisasional supaya secara cepat menyesuaikan kapasitas dan fungsionalitas produksi sebagai respon terhadap pasar atau syarat pengaturan sistem yang berubah secara tiba-tiba. Penelitian ini membahas mengenai alat bantu simulasi RMS dalam rangka perancangan RMS yang dilihat berdasarkan hasil produksi dan penggunaan waktu produksi. Alat bantu simulasi ini dibuat dengan menggunakan metode simulasi berorientasi objek. Dari hasil simulasi dan analisis dapat disimpulkan bahwa alat bantu simulasi RMS ini telah mengandung kaidah dari keenam karakteristik RMS (scalability, convertibility, integrability, modularity, customization dan diagnosability) yang dapat digunakan untuk perancangan dan penerapan RMS pada industri manufaktur.

Kata kunci : metode simulasi berorientasi objek, model, Reconfigurable Manufacturing Systems, simulasi

Abstract

Reconfigurable Manufacturing Systems (RMS) is a manufacturing system that has an ability to reconfigure hardware, software and control resources at all on the functional and organizational levels, in order to quickly adjust production capacity and functionality in response to sudden changes in market or in regulatory requirements. This study discusses the development of simulation model in order to design the RMS which is observed based on the production result and the use of production time. This model was made by using the method of object-oriented simulation. From the results of simulation and analysis models can be concluded that the RMS simulation model already contains the rules of the six characteristics of RMS (scalability, convertibility, integrability, modularity, customization and diagnosability) so it can be used as a tool in the design and implementation of RMS in manufacturing industry.

Keywords : Reconfigurable Manufacturing Systems , model, simulation, object-oriented simulation

Article Metrics: