skip to main content

REPAIR OF PROCESS EXTORTION OF CENTRIFUGAL OIL AND ADJUSMENT OF TECHNOLOGY IS PRECISELY UTILIZE AT INDUSTRY CHIPS EMPING GEPUK MELINJO DI KABUPATEN BATANG

1Jurusan Teknik Kimia PSD IlI Teknik, UNDIP Semarang, Indonesia

2Jl. Prof Sudarto SH Pedalangan Tembalang, Semarang 50239, Indonesia


Citation Format:
Abstract

Abstract

At the industry produce the chips emping gepuk melinjo conventional generally experience

of the resistance at process extortion of oil because this process walk gravitationly with

extortion time about 0.5 hour. Problems of arising out is oil conten in chips emping gepuk

melinio still high about 15 %  is while equipments of extortion of oil which have is not yet

can operate in an optimal fashion ( leak is in gravitation with time of 30 minute).  is so that

needed by the equipments able to improve ; repair the process extortion of oil in chips

emping gepuk melinjo fry. This matter will pursue in improvement of capacities produce the

chips emping gepuk melinio. To increase product to be needed modify, equipments of

extortion of oil,  so that efiensi production can be boasted up and peaceful for the use it and

also improve the chips emping product qualitv gepuk. As according to the clauses released

by Departemen Kesehatan, oil content in food stuff fried by is less than 5%. because at

high oil rate will quicken the process rancidity at food-stuff. Besides with high oil rate will

be able to improve the cholesterol rate in blood. From the result of perception during

extortion by centrifugal oil wringer, extortion time about 2 - 3 minute with oil content in

chips emping gepuk under or less than 5 %, so that the result of chips emping gepuk yielded

by seen drier and will improve the endurance.

 

Keyword : Chips emping gepuk melinjo, centrifugal wringer,oil rate and extortion time.

Fulltext View|Download

Article Metrics:

Last update:

No citation recorded.

Last update: 2024-03-29 09:16:42

No citation recorded.