DOI: https://doi.org/10.14710/reaktor.18.2.102-109

Recovery of Cu (II) and Cr (VI) Metals from Electroplating Liquid Waste Using Polymer Inclusion Membrane (PIM)

*muhammad cholid djunaidi orcid scopus  -  Chemistry Department, Faculty of Sciences and Mathematics, Diponegoro University, , Indonesia
Nor Basid Adiwibawa Prasetya  -  Chemistry Department, Faculty of Sciences and Mathematics, Diponegoro University,
Nur Asih Setyowati  -  Chemistry Department, Faculty of Sciences and Mathematics, Diponegoro University,
Khabibi Khabibi  -  Chemistry Department, Faculty of Sciences and Mathematics, Diponegoro University,
Khoirun Nita Ulfia  -  Chemistry Department, Faculty of Sciences and Mathematics, Diponegoro University, , Indonesia
Open Access Copyright (c) 2018 REAKTOR under http://creativecommons.org/licenses/by-nc-sa/4.0.

Citation Format:
Abstract

Research on recovery of Cu (II) and Cr (VI) from electroplating liquid waste has been carried out using a Polymer Inclusion Membrane (PIM). PIM has a high stability to overcome the weakness of liquid membrane instability. The PIM membrane was placed between two phases namely the feed phase as a metal source of Cu (II) from electroplating waste with pH 3 and the receiving phase which is HNO3 solution with pH 1 and pH 4.4 in the feed phase and pH 6.3 in the receiving phase with NaCl 2 N for metal Cr (VI). Recovery efficiency is known by determining the concentration of Cu (II) and Cr (VI) in the feed and receiving phases using AAS, while the membrane characterization were carried out using FTIR, SEM and UV-vis spectroscopy. The resulting PIM membrane has properties of thin, clear and flexible. AAS data showed that the percentage of PIM transport with stirring for 24 hours performed the highest percentage of Cu (II) metal transport from feed phase of 83.41% and transport in the receiving phase of 72.56%. While the percentage of optimum Cr (VI) transport was 97.8% in the feed phase and 76.5% in the receiving phase. The results of membrane characterization using FTIR and UV spectroscopy showed that the PIM membrane was quite stable. While the results of SEM show that there were no pores in the membrane so that the transport occurs by diffusion through the intermediate of the carrier compound.

 

Keywords: electroplating waste; liquid membrane; PIM

Fulltext View|Download

Article Metrics:

Article Info
Section: Research Article
Language : EN
Recent articles
Front Matter Recovery of Cu (II) and Cr (VI) Metals from Electroplating Liquid Waste Using Polymer Inclusion Membrane (PIM) Performance of Various Organic Solvents as Reaction Media in Plant Oil Lipolysis with Plant Lipase Shelf Life Prediction of Chocomix Instant Chocolate Beverage Powder Using Accelerated Shelf Life Testing (ASLT) based on Critical Moisture Content Approach Back Matter More recent articles
Most cited articles
PEMBUATAN KITOSAN DARI LIMBAH CANGKANG UDANG SERTA APLIKASINYA DALAM MEREDUKSI KOLESTEROL LEMAK KAMBING APPLICATION OF MODEL PREDICTIVE CONTROL (MPC) TUNING STRATEGY IN MULTIVARIABLE CONTROL OF DISTILLATION COLUMN Filter Cake Utilization as Filler of 15-15-15+5S Compound Fertilizer: Particle Size Distribution and Granule Crushing Strength Properties PENGARUH PROSES PENGERINGAN RIMPANG TEMULAWAK (Curcuma xanthorriza ROXB) TERHADAP KANDUNGAN DAN KOMPOSISI KURKUMINOID PREPARASI KARBON TEREMBAN OKSIDA COBALT DARI LIMBAH KULIT MANGGIS SEBAGAI ADSORBEN PENJERAP ETILEN UNTUK PENGAWETAN BUAH More cited articles

Last update:

  1. Resource Recovery in Industrial Waste Waters

    Vinay Kumar, Garima Singh, S.K. Dwivedi, A.K. Chaudhari, A.R. Tripathi. 2023. doi: 10.1016/B978-0-323-95327-6.00036-1

  2. Functionalized bi-polymeric inclusion membrane for pharmaceutical wastewater remediation: A preliminary investigation

    Oluwasola Ebenezer Idowu, Ahmad Abdul Latif, Shoparwe Noor Faziliani, Ismail Suzylawati. ADVANCES IN FRACTURE AND DAMAGE MECHANICS XX, 2848 , 2023. doi: 10.1063/5.0149345

Last update: 2024-11-16 08:17:03

No citation recorded.