DOI: https://doi.org/10.14710/rotasi.9.3.33-35

ANALISIS TEKUK PADA DAERAH PLASTIS MENGGUNAKAN METODE GERARD DAN EKSPERIMEN

*Agus Triono  -  Staf Pengajar Jurusan Teknik Mesin FT-UNEJ, Indonesia

Citation Format:
Abstract
Advanced studied of buckling phenomena in plastic region (crippling) is very important because the equations of this phenomena are semi-empirical equations only. The equations are collected from statistical studied from several experiment. One of those equations is founded by Gerard and used to be called Gerard Method. In this research, to proved this equation, crippling experiment of st ringer Al-7075 T6 and Al -7150 T7751 have been done at ITB Aerospace Engineering’s Structural Laboratory. From that experiment could be concluded that the equation of crippling could be used to analyzing crippling phenomena because the different between th eoritic and experi ment is about 1.73% to 12.24%
Fulltext View|Download Email colleagues

Article Metrics:

Article Info
Section: Articles research
Language : EN
Most cited articles
ANALISIS EFISIENSI RAW GRIDING MILL PADA PROSES PEMBUATAN SEMEN PENGARUH PERUBAHAN SUDUT PENYALAAN (IGNITION TIME) TERHADAP EMSISI GAS BUANG PADA MESIN SEPEDA MOTOR 4 (EMPAT) LANGKAH DENGAN BAHAN BAKAR LPG Pengaruh Post Weld Heat Treatment (Pwht) dengan Pemanas Induksi Terhadap Sifat Mekanik dan Struktur Mikro Sambungan Las Shield Metal Arc Welding (Smaw) pada Pipa API 5l X52 WEAR PREDICTION USING GIWM (GLOBAL INCREMENTAL WEAR MODEL) METHOD PENERAPAN DAN PENGUJIAN MODEL TEKNOLOGI ANAEROB DIGESTER UNTUK PENGOLAHAN SAMPAH BUAH-BUAHAN DARI PASAR TRADISIONAL More cited articles

Last update:

No citation recorded.

Last update: 2026-11-07 18:26:42

No citation recorded.