skip to main content

DIFFUSION BONDING : AN ADVANCED OF MATERIAL PROCESS

*Rusnaldy Rusnaldy  -  Staf pengajar jurusan teknik mesin FT-UNDIP, Indonesia

Citation Format:
Abstract
Diffusion bonding or diffusion welding is a solid state joining process. This bonding technique is based on the
atomic diffusion of elements at the joining interface. The diffusion-welding interface has same physical and mechanical
properties as base metal. The strength of joining depends on pressure, temperature, time of contact and the cleanness of
the interface. Diffusion bonding needs longer time than the other welding processes.
Fulltext View|Download

Article Metrics:

Last update:

No citation recorded.

Last update: 2024-12-08 07:44:05

  1. The effect of diffusion welding parameters on the mechanical properties of titanium alloy and aluminum couples

    Akca E.. Metals, 7 (1), 2017. doi: 10.3390/met7010022
  2. Transient liquid phase diffusion bonding for micro PCD tool fabrication

    Jeong B.. Journal of Mechanical Science and Technology, 27 (10), 2013. doi: 10.1007/s12206-013-0817-0
  3. Diffusion-bonded pulsating heat pipes: fabrication study and new channel proposal

    Betancur-Arboleda L.. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42 (9), 2020. doi: 10.1007/s40430-020-02555-4
  4. Bonding properties on diffusion bonding layer for micro PCD-WC tool fabrication

    Kim U.. Journal of Mechanical Science and Technology, 33 (8), 2019. doi: 10.1007/s12206-019-0717-z
  5. Microstructure and Kinetics of Intermetallic Phase Formation during Solid State Diffusion Bonding in Bimetal Ti/Al

    Amir Hossein Assari. Physics of Metals and Metallography, 120 (3), 2019. doi: 10.1134/S0031918X19030025
  6. Performance evaluation of bar plates without a draft angle to improve refining efficiency

    Lee M.S.. Palpu Chongi Gisul/Journal of Korea Technical Association of the Pulp and Paper Industry, 51 (5), 2019. doi: 10.7584/JKTAPPI.2019.10.51.5.84
  7. Influences of argon gas shielding on diffusion bonding of Ti-6Al-4V alloy to aluminum

    Akca E.. Revista de Metalurgia, 53 (1), 2017. doi: 10.3989/revmetalm.088
  8. Unconventional techniques for the production of light alloys and composites

    Herrera Ramirez J.M.. Unconventional Techniques for the Production of Light Alloys and Composites, 2020. doi: 10.1007/978-3-030-48122-3