BibTex Citation Data :
@article{ROTASI53845, author = {Rinasa Anugrah and Fajar Anggara}, title = {Angles of Tilted and Length of Resonator Effect on The Efficiency of A Close-Open-Type Thermoacoustic}, journal = {ROTASI}, volume = {25}, number = {2}, year = {2023}, keywords = {efficiency; resonator length; swte; tilted angles}, abstract = { In determining the optimal design of the thermoacoustic engine, parameters were studied: tilt angle and resonator length. The purpose of this study is to find the highest efficiency in tilt angle and resonator length for a standing wave thermoacoustic engine (SWTE). The heat transfer properties therein were detected at three tilt angles of -90°, 0° and 90°, resulting in three resonator lengths variations such as 390, 780 and 1170 mm. This study was conducted to determine the magnitude of pressure amplitude using a two-pressure transducer method of recording by data acquisition and counting with Matlab software. The results of this study show that a tilt angle of 90° has the highest efficiency and a tilt angle of 0° has the lowest efficiency. A cavity length of 390mm yielded the highest SWTE efficiency, with an efficiency of 5.5%. }, issn = {2406-9620}, pages = {15--22} doi = {10.14710/rotasi.25.2.1-8}, url = {https://ejournal.undip.ac.id/index.php/rotasi/article/view/53845} }
Refworks Citation Data :
In determining the optimal design of the thermoacoustic engine, parameters were studied: tilt angle and resonator length. The purpose of this study is to find the highest efficiency in tilt angle and resonator length for a standing wave thermoacoustic engine (SWTE). The heat transfer properties therein were detected at three tilt angles of -90°, 0° and 90°, resulting in three resonator lengths variations such as 390, 780 and 1170 mm. This study was conducted to determine the magnitude of pressure amplitude using a two-pressure transducer method of recording by data acquisition and counting with Matlab software. The results of this study show that a tilt angle of 90° has the highest efficiency and a tilt angle of 0° has the lowest efficiency. A cavity length of 390mm yielded the highest SWTE efficiency, with an efficiency of 5.5%.
Article Metrics:
Last update:
Last update: 2024-10-12 04:48:28
Penerbit: Departemen Teknik Mesin, Fakultas Teknik, Universitas Diponegoro
Alamat Redaksi: Gedung Administrasi Lantai II Departemen Teknik Mesin Fakultas Teknik Undip Telp.(024)7460059, Facsimile: (024)7460059 ext.102 Email: rotasi@live.undip.ac.id