ANALISA ELECTRODE CONSUMABLE TYPE OK AUTROD 12.10 DENGAN PENGELASAN SUBMERGED ARC WELDING (SAW) PADA BLOCK KAPAL DCV 18500 DWT DI PT. JASA MARINA INDAH SEMARANG

Citation Format:
Abstract
In this of globalization is growing very rapidly advancing technology. As well as in shipyard industry is toshipbuilding process. Submerged Arch Welding (SAW) is as joint methode of ship construction. Purpose ofresearch know number of electrodes wich requirement on block welding the ship DCV 18500 DWT in JasaMarina Indah Shipyard Semarang.The specimen experiment used is ST 42 low carbon steel. Variation of plates tickness is 12, 13, 14, 17, 19 and24 mm. Research step is carried out by making the specimen with variation thickness respectively. Specimendimensions length x width is 500 mm x 50 mm. The number of each specimen was made of three pieces. Thendo the measurement welding length, length and weight electrodes and slag welding.The analysis result of data welding on the specimen can be known number of electrode s and fluxs inSubmerged Arch Welding (SAW). The aplication of this research is the block DB 5(p/c/s), SS5A(p/s), SS5B(p/s), UD 5C, and TB 102 (p/c/s. Weight of consumable electrodes is 2185.31 kg (73 roll) and number offlux used wight is 2967.95 kg (119 bag).
Keywords: Submerged Arc Welding, Consumable electrode, and Flux.
Article Metrics:
Others articles
PERMASALAHAN AIRTANAH PADA DAERAH URBAN
PENGGUNAAN ABU SEKAM PADI SEBAGAI ADSORBEN DALAM PENGOLAHAN AIR LIMBAH YANG MENGANDUNG LOGAM Cu
PENURUNAN KANDUNGAN PHOSPHAT PADA LIMBAH CAIR INDUSTRI PENCUCIAN PAKAIAN (LAUNDRY) MENGGUNAKAN KARBON AKTIF DARI SAMPAH PLASTIK DENGAN METODE BATCH DAN KONTINYU (Studi Kasus : Limbah Cair Industri Laundry Lumintu Tembalang, Semarang)
PEMBUATAN PUPUK FOSFAT DARI BATUAN FOSFAT ALAM SECARA ACIDULASI
Pembuatan Briket Arang Dari Campuran Tempurung Kelapa dan Serbuk Gergaji Kayu Sengon
OPTIMALISASI EKSTRAKSI DAN UJI STABILITAS PHYCOCYANIN DARI MIKROALGA Spirulina platensis
Last update: 2021-01-16 04:55:11
No citation recorded.
Last update: 2021-01-16 04:55:11
No citation recorded.
The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to jurnal TEKNIK and Faculty of Engineering, Diponegoro University as publisher of the journal.
Copyright transfer agreement can be found here: [Copyright transfer agreement in doc] and [Copyright transfer agreement in pdf].