DOI: https://doi.org/10.14710/teknik.v45i1.52415

Analysis of the Application Time Cost Trade-Off Method on Tug Boat 135 GT Repair Projects Owned by PT. Pelabuhan Indonesia II

Analysis of the Time Cost Trade-Off Method Application on Tug Boat 135 GT Repair Projects Owned by PT. Pelabuhan Indonesia II

*Ari Wibawa Budi Santosa scopus  -  Department of Naval Architecture, Faculty of Engineering, Universitas Diponegoro, Jl. Prof. Sudarto, SH, Tembalang, Semarang, Indonesia 50275, Indonesia
Andi Trimulyono  -  Departemen Teknik Perkapalan, Fakultas Teknik, Universitas Diponegoro, Indonesia
Anugrah Firnandito  -  Departemen Teknik Perkapalan, Fakultas Teknik, Universitas Diponegoro, Indonesia
Joko Subekti  -  Departemen Teknik Perkapalan, Fakultas Teknik, Universitas Diponegoro, Indonesia
Eko Sasmito Hadi  -  Departemen Teknik Perkapalan, Fakultas Teknik, Universitas Diponegoro, Indonesia
Open Access Copyright (c) 2024 TEKNIK

Citation Format:
Abstract
In the project implementation process, there is still the possibility of delays, as in the case of the Tanjung Buyut I Tug Boat ship repair project - 206 135 GT calculations are needed to accelerate the project to determine the optimum time and cost. One method that can be used in accelerating projects / crashing projects is the Time Cost Trade-Off method. This method can be used to solve this problem by adding specific alternatives such as working hours, labor, and other things with the minimum additional cost. In this study, an alternative acceleration was carried out by adding manpower and working hours duration of 1 to 4 hours which would be applied to the Hull repair project for the Tug Boat Tanjung Buyut I-206 135 GT. Based on the results of the analysis that has been carried out on the work of the Hull section, which is included in the critical activity, it is obtained that the most optimum duration acceleration is the addition of working hours (overtime) for 3 hours and an additional workforce of 24 peoples which results in an acceleration of time of 17 days from the normal duration of 60 days to 43 days with a time efficiency of 28%, as well as a cost reduction of IDR 19,700,000 or around 3.34% compared to the normal duration fee of IDR 571,950,000 to IDR 552,250,000.
Fulltext View|Download
Keywords: Crashing Project; Duration Acceleration; Time Cost Trade-Off

Article Metrics:

Article Info
Section: Artikel
Language : EN
Recent articles
Studi Potensi Saddle Area di Bendungan Budong Budong Berbasis Sistem Informasi Geografis (SIG) Evaluasi Kemampuan Bendungan Logung dalam Mereduksi Banjir Akibat Perubahan Curah Hujan dan Tata Guna Lahan Analisis Nilai Lugeon dan Grout Take Berdasarkan Hasil Trial Grouting pada Sandaran Kanan Bendungan Ameroro untuk Mengidentifikasi Korelasi Nilai Lugeon dengan Kondisi Geologi Batuan Pondasi More recent articles
Most cited articles
Penyisihan Limbah Organik Air Lindi TPA Jatibarang Menggunakan Koagulasi-Flokulasi Kimia PERMASALAHAN AIRTANAH PADA DAERAH URBAN POTENSI MIKROALGA SEBAGAI SUMBER BIOMASA DAN PENGEMBANGAN PRODUK TURUNANNYA Flood Disaster Mitigation Using a Disaster Early Warning and Monitoring Information System with an IoT-Based Arduino Microcontroller KONSEP WATERFRONT PADA PERMUKIMAN ETNIS KALI SEMARANG More cited articles
  1. Ashari. (2011). Manajemen Proyek. Politeknik Negeri Bandung: Buku Ajar
  2. Howick, S., Ackermann, F., Eden, C., & Williams, T. (2009). Understanding the causes and consequences of disruption and delay in complex projects: how system dynamics can help. Encycl. Complex. Syst. Sci., pp. 1–33
  3. Rachman, T. (2013). Manajemen Proyek (Crashing Project). Universitas Esa Unggul: Buku Ajar
  4. Priyo, M., & Aulia, M. R. (2016). Aplikasi Metode Time Cost Trade Off Pada Proyek Konstruksi: Studi Kasus Proyek Pembangunan Gedung Indonesia. Semesta Tek., 18(01)
  5. Muharani, A., Mulyatno, I. P., & Jokosisworo, S. (2020). Optimasi Percepatan Proyek Pembangunan Kapal Kelas I Kenavigasian dengan Metode Pendekatan Analisa Time Cost Trade Off. J. Teknik Perkapalan, 5(8)
  6. Ervianto, I, W. (2004). Teori Aplikasi Manajemen Proyek Konstruksi. Yogyakarta. Andi
  7. Maddeppungeng, A., & Suryani, I. (2015). Analisis Optimasi Biaya Dan Waktu Dengan Metode TCTO (Time Cost Trade Off). Fondasi J. Tek. Sipil, 4(1)
  8. Angelia, C., Mulyatno, I. P., & Chrismianto, D. (2021). Aplikasi Metode Time Cost Trade Off Akibat Keterlambatan Bagian Mesin Pada Proyek Pembangunan Mooring Boat Milik PT. Pertamina Trans Kontinental. J. Teknik Perkapalan, 9(3)
  9. Sutrisno, E. (2009). Manajemen Sumber Daya Manusia. Jakarta. Kencana Prenada Media
  10. Richard Lee Storch, R. C. M., Hammon, C. P., & Bunch, H. M. (1995). Ship Production Second Edition. New Jersey. The Society of Naval Architects And Marine Engineers
  11. Hutapea, J. S. T., Mulyatno, I. P., & Manik, P. (2020). Studi Penjadwalan Ulang Pekerjaan Reparasi pada Kapal MV. Awu dengan Network Diagram dan Critical Path Method (CPM). J. Teknik Perkapalan, 8(4)
  12. Government Regulation Number 35 of 2021 Concerning Work Agreements for Specific Time, Outsourcing, Working Time and Rest Time, and Termination of Employment, no. 086142. 2021, p. 42
  13. Eirgash, M. A., & Toğan, V. (2019). Time-Cost Trade-Off Optimization Using Siemens’s Effective Cost Slope Time-Cost Trade-Off Optimization Using Siemens ’ s Effective Cost Slope Method, Conf. Pap., no. April

Last update:

No citation recorded.

Last update: 2024-11-20 22:31:58

No citation recorded.