BibTex Citation Data :
@article{Transmisi5054, author = {Agung Warsito dan M. Facta dan Safarul Azmi}, title = {PENGGUNAAN FEM (FINITE ELEMENT METHOD) DALAM MEMETAKAN MEDAN LISTRIK PADA PERMUKAAN ISOLATOR JENIS PIN DAN POST 20 KV SERTA UDARA DI SEKITARNYA}, journal = {Transmisi: Jurnal Ilmiah Teknik Elektro}, volume = {10}, number = {4}, year = {2013}, keywords = {}, abstract = { Abstract. Electric field is the area which still be influenced electricity from certain electric charge. Based on WHO recommendation in 1990, electric field limits which is allowed at public during 24 hours per day is 5 kV/m. Saluran Udara Tegangan Menengah (SUTM) has big electric field intensity. Therefore, required a study to map the electric field and know the distance that a man is enabled to stay at that electric field limits. The analysis to map the electric field at this final report is by using the Finite Element Method GEM). FEM is a numerical method for solving problems of engineering and mathematical physics. The analysis is assist by using MATLAB 7.0.1 and ANSYS 9.0 as benchmarking prograrn. From the result of simulation, the transformation of electric mast construction at pin type insulator had an effect on the electric field intensity value only at the direction from middle position of conductor upward. The electric mast construction using post type insulator has bigger electric field intensity than the electric mast construction using pin type insulator if evaluated from the same distance. Keywords : electric field, finite element method, and distribution line }, issn = {2407-6422}, pages = {172--178} doi = {10.12777/transmisi.10.4.172-178}, url = {https://ejournal.undip.ac.id/index.php/transmisi/article/view/5054} }
Refworks Citation Data :
Abstract. Electric field is the area which still be influenced electricity from certain electric
charge. Based on WHO recommendation in 1990, electric field limits which is allowed at
public during 24 hours per day is 5 kV/m. Saluran Udara Tegangan Menengah (SUTM) has
big electric field intensity. Therefore, required a study to map the electric field and know the
distance that a man is enabled to stay at that electric field limits.
The analysis to map the electric field at this final report is by using the Finite Element Method
GEM). FEM is a numerical method for solving problems of engineering and mathematical
physics. The analysis is assist by using MATLAB 7.0.1 and ANSYS 9.0 as benchmarking
prograrn.
From the result of simulation, the transformation of electric mast construction at pin type
insulator had an effect on the electric field intensity value only at the direction from middle
position of conductor upward. The electric mast construction using post type insulator has
bigger electric field intensity than the electric mast construction using pin type insulator if
evaluated from the same distance.
Keywords : electric field, finite element method, and distribution line
Article Metrics:
Last update:
Last update: 2024-11-22 05:27:53
Transmisi: Jurnal Ilmiah Teknik Elektro dan Departemen Teknik Elektro, Universitas Diponegoro dan Editor berusaha keras untuk memastikan bahwa tidak ada data, pendapat, atau pernyataan yang salah atau menyesatkan dipublikasikan di jurnal. Dengan cara apa pun, isi artikel dan iklan yang diterbitkan dalam Transmisi: Jurnal Ilmiah Teknik Elektro adalah tanggung jawab tunggal dan eksklusif masing-masing penulis dan pengiklan.
Formulir Transfer Hak Cipta dapat diunduh di sini: [Formulir Transfer Hak Cipta Transmisi]. Formulir hak cipta harus ditandatangani dan dikirim ke Editor dalam bentuk surat asli, dokumen pindaian atau faks:
Dr. Munawar Riyadi (Ketua Editor)Departemen Teknik Elektro, Universitas Diponegoro, IndonesiaJl. Prof. Sudharto, Tembalang, Semarang 50275 IndonesiaTelepon/Facs: 62-24-7460057Email: transmisi@elektro.undip.ac.id
