skip to main content

PERBAIKAN KUALITAS PADA PRODUK GENTENG DENGAN METODE SIX SIGMA

*Shanty Kusuma Dewi  -  Jurusan Teknik Industri, Universitas Muhammadiyah Malang, Indonesia
Dyah Maslahatul Ummah  -  Jurusan Teknik Industri, Universitas Muhammadiyah Malang, Indonesia

Citation Format:
Abstract

Berkembangnya industri kecil dan menengah menimbulkan persaingan dalam industri. Hal ini membuat setiap usaha harus memperhatikan kebutuhan pelanggan. Kualitas merupakan salah satu faktor pemenuhan kebutuhan pelanggan dan merupakan jaminan yang harus diberikan oleh perusahaan kepada pelanggan. Industri   yang menghasilkan kualitas produk yang baik akan mengurangi kerugian karena kegagalan produk. Produk yang sesuai spesifikasi dan seragam dapat dihasilkan dengan cara memperkecil variasi proses. Tujuan dari penelitian ini adalah mengimplementasikan konsep six sigma pada suatu industri yang memproduksi genteng. Six sigma merupakan metode mengidentifikasi penyebab kecacatan pada produk maupun proses dengan memperbaiki permasalahan dan meningkatkan kualitas melalui siklus DMAIC (Define, Measure, Analysis, Improve, Control). Dari hasil penelitian didapatkan penurunan DPMO dari 29311 menjadi 8974,35 dan terjadi peningkatan nilai sigma level dari 3,35 menjadi 3,99 sigma.

 

Abstract

[Quality Improvement On Tile Products With Six Sigma Method] The development of small and medium industries has led to competition in the industry. Competitions make every business must pay attention to customer needs. Quality is one of the factors fulfilling customer needs and is a guarantee that must be given by the company to customers. Industries that produce good quality products will reduce losses due to product failure. Products that meet specifications and uniforms can be produced by minimizing process variations. The purpose of this study is to implement the concept of six sigma in an industry that produces tile. Six Sigma is a method of identifying causes of defects in products and processes by fixing problems and improving quality through the DMAIC cycle (Define, Measure, Analysis, Improve, Control). From the results of the study, there was a decrease in DPMO from 29311 to 8974.35 and an increase in the sigma level from 3.35 to 3.99 sigma.

Keywords: quality; Six Sigma; DMAIC; taguchi method

Note: This article has supplementary file(s).

Fulltext View|Download |  Research Instrument
Lampiran 1 - Gambar OPC (Operation Process Chart)
Subject
Type Research Instrument
  Download (129KB)    Indexing metadata
Keywords: kualitas; Six Sigma; DMAIC; metode taguchi

Article Metrics:

Last update:

  1. Analisis Pengandalian Kualitas Proses Produksi Batu Bata Merah dengan Metode Kapabilitas Proses di Kilang Batu Bata Rahmansyah Purwodadi, Deli Serdang

    Syahrial Efendi Sinaga Sinaga, Abdurrozzaq Hasibuan, Wirda Novarika. Factory Jurnal Industri, Manajemen dan Rekayasa Sistem Industri, 2 (1), 2023. doi: 10.56211/factory.v2i1.362

Last update: 2024-03-28 03:28:28

No citation recorded.