skip to main content

Analysis of Fatigue Life of Tugboat Towing Hook Construction Using Finite Element Method

*Luh Putri Adnyani orcid  -  Department of Ocean Engineering, Institut Teknologi Kalimantan, Indonesia
Muhammad Abid Mapariorio Arsyad  -  Department of Naval Architecture & Shipbuilding, Institut Teknologi Kalimantan, Indonesia
Samsu Dlukha Nurcholik  -  Department of Naval Architecture & Shipbuilding, Institut Teknologi Kalimantan, Indonesia
Open Access Copyright (c) 2020 KAPAL under http://creativecommons.org/licenses/by-sa/4.0.

Citation Format:
Cover Image
Abstract

The towing hook on the tugboat has a function to pull the barge. Because of this ability, a good towing hook construction is needed to work optimally. Indications for the good construction is the value of fatigue life, which is more than the value of design life of 20 years. A towing hook detail on tugboat from PT. Asia Aditama Shipyard – Balikpapan was selected as an example. This study aims to obtain the value of fatigue life based on the total resistance calculated by BHP data in full, 75%, and 50% of the total displacement volume and estimate the maximum size of a barge, based on maximal towing pull capacity. The benefits of this research are providing information about the fatigue life of a towing hook, analyzing several possible load cases, and giving the recommendation of the maximum principal dimensions of the barge that the towing hook can be pulled. The method used in this study is the finite element method using ANSYS, the fatigue life calculation approach is the Palmgren–Miner cumulative damage method and refers to the DNVGL rule. The results of the calculation of fatigue life in the maximum towing pull condition are 22 years, 22 years, and 23 years at 100%, 75%, and 50%, respectively. The main size of barges that can be towed by Tugboats under maximum towing pull conditions are LOA = 147m, LWL = 144,529m, B = 35m, H = 13m, T = 11m.

Fulltext View|Download
Keywords: Tugboat, Towing hook, Fatigue Life

Article Metrics:

  1. K. Kwon and D. M. Frangopol, "Fatigue life assessment and lifetime management of aluminum ships using life-cycle optimization," Journal of ship research, vol. 56, no. 2, pp. 91-105, 2012
  2. W. Fricke, H. Petershagen, and H. Paetzold, "Fatigue Strength of Ship Structures," Part I: Basic Principles, Germanischer Lloyd, Hamburg, pp. 34-36, 1997
  3. N. Veritas, Fatigue assessment of ship structures. Det Norske Veritas, 2001
  4. N. Ferreira, J. S. Jesus, J. A. M. Ferreira, C. Capela, J. M. Costa, and A. C. Batista, "Effect of bead characteristics on the fatigue life of shot peened Al 7475-T7351 specimens," International Journal of Fatigue, vol. 134, p. 105521, 2020/05/01/ 2020
  5. H. Chandra and B. Sianturi, "Analysis of Fatigue Life and Crack Propagation Characterization of Gray Cast Iron under Normalizing Process," in Journal of Physics: Conference Series, 2019, vol. 1198, no. 3: IOP Publishing, p. 032006
  6. H. Wan, Q. Wang, C. Jia, and Z. Zhang, "Multi-scale damage mechanics method for fatigue life prediction of additive manufacture structures of Ti-6Al-4V," Materials Science and Engineering: A, vol. 669, pp. 269-278, 2016
  7. J. L. Otegui, "Fatigue damage leads to a serious traffic accident," Engineering Failure Analysis, vol. 9, no. 1, pp. 109-122, 2002/02/01/ 2002
  8. T. Moan, "Fatigue reliability of marine structures, from the Alexander Kielland accident to life cycle assessment," International Journal of Offshore and Polar Engineering, vol. 17, no. 01, 2007
  9. Y. Wang, "Spectral fatigue analysis of a ship structural detail – A practical case study," International Journal of Fatigue, vol. 32, no. 2, pp. 310-317, 2010/02/01/ 2010
  10. G. F. M. Souza and B. M. Ayyub, "Probabilistic Fatigue Life Prediction for Ship Structures Using Fracture Mechanics," Naval Engineers Journal, vol. 112, 4, pp. 375-397(23), 2000
  11. D. Guan, "A method of predicting the fatigue life curve for misaligned welded joints," International Journal of Fatigue, vol. 18, no. 4, pp. 221-226, 1996
  12. K. J. Kirkhope, R. Bell, L. Caron, R. I. Basu, and K. T. Ma, "Weld detail fatigue life improvement techniques. Part 1: review," Marine Structures, vol. 12, no. 6, pp. 447-474, 1999
  13. K. J. Kirkhope, R. Bell, L. Caron, R. I. Basu, and K. T. Ma, "Weld detail fatigue life improvement techniques. Part 2: application to ship structures," Marine Structures, vol. 12, no. 7, pp. 477-496, 1999
  14. A. P. Rizky, I. P. Mulyatno, and S. Jokosisworo, "ANALISA FATIGUE KONTRUKSI MAIN DECK SEBAGAI PENUMPU TOWING HOOK AKIBAT BEBAN TARIK PADA KAPAL TUG BOAT 2 x 800 HP DENGAN METODE ELEMEN HINGGA," Jurnal Teknik Perkapalan, vol. 4, no. 1, 2016
  15. L. Damanik, I. P. Mulyatno, and B. A. Adietya, "KAJIAN TEKNIK KEKUATAN KONSTRUKSI KAPAL TUGBOAT 2 x 800 HP DENGAN METODE ELEMEN HINGGA," Jurnal Teknik Perkapalan, vol. 4, no. 1, 2016
  16. G. Dave, "Propeller Handbook The Complete Reference for choosing, instaling and Understanding Boat Propeller," ed: The McGrew-Hill Companies. USA, 1989
  17. A. SV, "Harvald," Resistance and Propulsion of Ships. Denmark: John Weiley & Sons, 1983
  18. A. F. Molland, S. R. Turnock, and D. A. Hudson, Ship resistance and propulsion. Cambridge university press, 2017
  19. M. Alam and M. Wahab, "Finite Element Modeling of Fatigue Crack Growth in Curved-Welded Joints Using Interface Elements," ed: University of Illinois. Illinois, 2005
  20. G. DNV, "Fatigue design of offshore steel structures," Recommended Practice DNVGL-RP-C203, vol. 20, 2016
  21. S. Jokosisworo and J. Sebastian, "Analisa Fatigue Kekuatan Stern Ramp Door Akibat Beban Dinamis Pada KM. KIRANA I Dengan Metode Elemen Hingga Diskrit Elemen Segitiga Plane Stress," Kapal: Jurnal Ilmu Pengetahuan dan Teknologi Kelautan, vol. 8, no. 3, pp. 119-125, 2011
  22. D. N. Veritas, "Fatigue design of offshore steel structures," DNV Recommended Practice DNV-RP-C203, 2010
  23. H. T. Kang, "Fatigue prediction of spot welded joints using equivalent structural stress," Materials & Design, vol. 28, no. 3, pp. 837-843, 2007/01/01/ 2007

Last update:

  1. Reliability Assessment by Factor of Safety on the Tensile Failure Behaviour on Military Grade Armour Steel Weldment

    N. Vimal Kumar, M. Uthayakumar, S. Thirumalai Kumaran, A. Velayudham. Human Factors and Mechanical Engineering for Defense and Safety, 6 (1), 2022. doi: 10.1007/s41314-022-00051-2

Last update: 2024-11-13 13:25:12

No citation recorded.