Pusat Riset Fisika, BRIN, Ged. 440-442 Kawasan Puspiptek, Serpong, Tangerang Selatan, Banten, Indonesia
BibTex Citation Data :
@article{JKSA41072, author = {Titik Lestariningsih and Qolby Sabrina and Christin Ratri and Achmad Subhan and Slamet Priyono}, title = {The Effect of LiBOB Addition on Solid Polymer Electrolyte (SPE) Production based PVDF-HFP/TiO2/LiTFSI on Ionic Conductivity for Lithium-Ion Battery Applications}, journal = {Jurnal Kimia Sains dan Aplikasi}, volume = {25}, number = {1}, year = {2022}, keywords = {SPE; solution casting; LiBOB, LiTFSI; conductivity}, abstract = { SPE (Solid Polymer Electrolyte) is an alternative to substitute conventional liquid electrolytes as it has a better safety level and has been produced using the solution casting method. An effort to increase the SPE conductivity of the PVDF-HFP/TiO 2 / LiTFSI system has been carried out by adding LiBOB as an additive. LiBOB (lithium bis(oxalate) borate) is a salt compound that can interfere with the crystallization process of polymer chains, so it is expected to increase ion conductivity. However, the results showed a decrease in the conductivity from 3.643 x 10 -5 S/cm to 8.658 x 10 -6 S/cm. These results were proven by the XRD, FTIR, SEM, and TGA characterization. Based on XRD (X-ray Diffraction) analysis, the addition of LiBOB increased the crystallinity phase. The results of the SEM (Scanning Electron Microscope) analysis showed that the pore size was partially reduced, the distance between the pores became longer, and the pore closure occurred due to agglomeration. The FTIR (Fourier Transform Infrared spectroscopy) analysis showed the interaction of LiBOB salts in the PVDF-HFP/LiTFSI/TiO 2 system, and based on TGA (Thermogravimetric Analysis) analysis, the addition of LiBOB affected the heat stability of the SPE. The CV (Cyclic Voltammetry) analysis showed that the addition of LiBOB in the SPE system could reduce the reversibility and magnitude of the current. }, issn = {2597-9914}, pages = {13--19} doi = {10.14710/jksa.25.1.13-19}, url = {https://ejournal.undip.ac.id/index.php/ksa/article/view/41072} }
Refworks Citation Data :
SPE (Solid Polymer Electrolyte) is an alternative to substitute conventional liquid electrolytes as it has a better safety level and has been produced using the solution casting method. An effort to increase the SPE conductivity of the PVDF-HFP/TiO2/ LiTFSI system has been carried out by adding LiBOB as an additive. LiBOB (lithium bis(oxalate) borate) is a salt compound that can interfere with the crystallization process of polymer chains, so it is expected to increase ion conductivity. However, the results showed a decrease in the conductivity from 3.643 x 10-5 S/cm to 8.658 x 10-6 S/cm. These results were proven by the XRD, FTIR, SEM, and TGA characterization. Based on XRD (X-ray Diffraction) analysis, the addition of LiBOB increased the crystallinity phase. The results of the SEM (Scanning Electron Microscope) analysis showed that the pore size was partially reduced, the distance between the pores became longer, and the pore closure occurred due to agglomeration. The FTIR (Fourier Transform Infrared spectroscopy) analysis showed the interaction of LiBOB salts in the PVDF-HFP/LiTFSI/TiO2 system, and based on TGA (Thermogravimetric Analysis) analysis, the addition of LiBOB affected the heat stability of the SPE. The CV (Cyclic Voltammetry) analysis showed that the addition of LiBOB in the SPE system could reduce the reversibility and magnitude of the current.
Article Metrics:
Last update:
Synthesis of carboxymethyl cellulose from coconut fibers and its application as solid polymer electrolyte membranes
Engineering Dry Electrode Manufacturing for Sustainable Lithium-Ion Batteries
Last update: 2026-09-10 04:41:29
As an article writer, the author has the right to use their article for various purposes, including use by institutions that employ the author or institutions that provide funding for the research. These author rights are granted without special permission.
Authors who publish a paper in JKSA have broad rights to use their work for teaching and scientific purposes without the need to request permission, including: (i) teaching in the author's class or institution; (ii) presenting the work at meetings or conferences and distributing copies to participants; (iii) using the work in training conducted by the author or the author's institution; (iv) distributing copies to colleagues for research purposes; (v) using the work in the compilation of subsequent works by the author; (vi) including the work in a thesis or dissertation; (vii) reusing part of the article in another work, with appropriate citation; (viii) preparing derivative works, with appropriate citation; and (ix) voluntarily posting the work on open websites operated by the author or the author's institution for scientific purposes, in accordance with the CC BY-SA License.
Authors and readers may copy and redistribute the material in any medium or format, and may remix, transform, and build upon the material for any purpose, provided that they give appropriate credit by citing the article or its content, provide a link to the license, and indicate if changes were made.
The authors submitting a manuscript do so on the understanding that, if accepted for publication, the copyright of the article shall be assigned to Jurnal Kimia Sains dan Aplikasi (JKSA). Copyright encompasses the rights to reproduce and distribute the article in all forms and media, including reprints, photographs, microfilms, and any other similar reproductions, as well as translations.
Reproducing any part of this journal, storing it in a database, or transmitting it in any form or medium is permitted without written permission from JKSA. However, the original source must be properly cited in accordance with academic conventions.
JKSA, the Chemistry Department of Diponegoro University, and the Editor make every effort to ensure that no inaccurate, false, or misleading data, opinions, or statements are published in JKSA. However, the content of each article is the sole and exclusive responsibility of its authors.
The Copyright Transfer Form can be downloaded here: [Copyright Transfer Form - Indonesian] [Copyright Transfer Form - English]. The copyright form should bear the authors' original signatures and be sent to the Editor as a printed document, a scanned document sent via email, or by fax.
Prof. Adi Darmawan, Ph.D (Editor in Chief)
Editor in chief of Jurnal Kimia Sains dan Aplikasi (JKSA)
Chemistry Department, Faculty of Sciences and Mathematics, Diponegoro University
Visitor: View My Stats
Jurnal Kimia Sains dan Aplikasi is indexed in:
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.